Wire Mesh Belt Co.

Light weight & open construction makes this belt popular in baking and food processing. Positive driven belting manufactured from 302 stainless steel and music wire. This belt is manufactured in the following standard meshes; 72 x .035”, 48 x .050”, 32 x .082”, 24 x .092”, 72 x .050”, 42 x .050”, 27 x .050”, 15 x .092”, 54 x .035”, 42 x .062”, 24 x .072” Also available in metric pitch. Complete line of sprockets, blanks, shafts, turn belts, and complete conveyor units.

Cost effective open design belting using flat strip to form spirals in a rectangular opening joined with straight pins. Available in standard duty (38” thick) and heavy duty (12” thick) series. Available meshes are; Standard Duty 1 x 1, 12 x 1, 12 x 1 Modified, 12 x 12. Heavy Duty 1 x 1, 12 x 1, 12 x 1 Modified, 1 x 1 radius, 12 x 1 radius. Flat Wire belting is available in galvanized, high carbon and stainless steel. A complete line of sprockets, shafts, flights and attachments are available.

A variation of the balanced weave, consisting of alternating left & right hand spirals compressed to create a very tight weave with a flat surface. Generally assembled with a straight connecting rod, but is available in limited specifications with a crimped connecting rod. CB3-30-72-14 CB = compound balance 3 = 3 cross rods per spiral 30 = 30 loops per foot width per spiral 72 = 72 spirals per foot length 14 = 14 gauge wire (.080” dia.) Common mesh used for small fasteners, catalyst and baking bands. Also used as furnace curtains. Available in any material.

Manufactured using left & right hand spiral connected with a crimped connecting rod to create a balanced weave that is straight tracking. This weave is designated with the letter “B”.

Also referred to as chain link mesh since it is woven in the same manner as Chain Link fencing. All spirals are of the same direction and are woven together without the use of connecting rods. CLK-24-24-16 or 12” x 16 gauge conventional weave Generally used in chain driven applications where exceptional drainage of open area are required. Available in any material.

Positive driven belt in 12” & 1” pitch variations. Used in straight running and radius applications (inside radius is 2.2 x belt width). Driven via a stamped U shaped link on each edge joined with a 6 gauge rod (.192”). Available with mesh overlay for very fine or flat product. Commonly used on cooling or freezing conveyors and spiral towers in the food processing and baking industries.