Post Buy Requirement

Our Products

3/4" NPTF Thread Flange Kit, Code 61, O-Ring

  • Weight 1.3000
  • Manufacturer Anchor Fluid Power
  • Pad Type O-Ring
  • Flange Size 3/4"
  • Port Size 3/4" NPT
These flanges are offered in both code 61 and code 62. They are also available in both o-ring and flat face pad. Be sure to use thread sealant when using npt threads. This paticular part number is supplied as a kit including Metric socket head cap screws, metric lock washers and an o-ring.
View Complete Details

Urethane Drive Coupling Insert, 500 Series, 90A

  • Weight 0.1500
  • Manufacturer Magnaloy
  • Material Urethane
  • Durometer 90A
Magnaloy Coupling's full range of flexible inserts permit custom design performance for a wide range of applications. All insert materials offer complete electrical insulation, as Magnaloy's design eliminates all metal-to-metal contact.

Neoprene - Black material - Standard material with Magnaloy Coupling. Good general purpose material offering good resiliency and load capabilities. Temp range -300F to +2500F (-340C to -1210C). Optional 80A durometer (painted Gold) and 90A durometer (painted Silver) are available for slight increased load capability and less resiliency.

Nitrile - Painted Blue. Excellent material with petroleum products. Excellent compression set and abrasion resistance characteristics. Temp range -600F to +2500F (-510C to +1210C).

Urethane - Yellow material. Excellent mechanical and physical properties. Offers good medium duty durability and resiliency. Urethane tends to soften at higher temperatures and humid conditions. Temp range -300F to +1500F (-340C to +660C).

Viton - Red material. Excellent fluid compatibility and high temperature characteristics. Good compression set and resiliency. Temp range -200F to +3500F (-290C to +1770C).

Hytrel - Blue material. Superior physical and mechanical properties and excellent fluid compatibility and high temperature characteristics. Hardness (50D) approaches that of plastic and offers little resiliency. Excellent performance under heavy duty conditions. Temp range -650F to +3000F (-540C to +1490C).
View Complete Details

1" Brass Barb X 1" NPT Fitting

  • Weight 0.3500
  • Manufacturer Campbell Fittings
  • SKU BM-1616
  • Country of Manufactures United States
MALE & FEMALE INSERT FITTINGS Insert fittings are precision screw machined in steel, stainless steel and brass. Recommended use  Low pressure air, water Recommended hose attachment
View Complete Details

1 1/2 Blanking Flanges

  • Type Blanking Flange
  • SKU W36-24-24
  • Weight 2.5000
  • Flange Size 1 1/2"
  • Pad Type O-Ring
Blanking flanges are to blank off flow at a connection point. These come in flat face or o-ring in both code 61 and code 62 options.
View Complete Details

3/4 Butt Weld Pipe Flange

  • Weight 0.7700
  • Flange Size 3/4"
  • Pipe Size 3/4"
  • Manufacturer Anchor Fluid Power
  • Pipe Type Schedule 80
Butt weld pipe flange connections come in o-ring and flat face and code 61 and code 62 flange options. A schedule 40, 80, or 160 pipe is inserted into the fitting and welded in place. These are steel fittings.
View Complete Details

3/4 Flat Socket Weld Pipe Flanges

  • Weight 0.7400
  • Manufacturer Anchor Fluid Power
  • Flange Size 3/4"
  • Pad Type Flat Face
  • Port Size 3/4"
Flat socket weld pipe flanges come in both o-ring and flat face. They are also available in code 61 or code 62.
View Complete Details

Piston Pump, 3000 PSI, 3.78 Cubic Inch/rev

  • Weight 86.0000
  • Shaft Type Straight Key
  • Shaft Diameter 1 1/4"
  • Rotation CW Rotation
  • PoRotationrt Location Rear
Variable volume pressure compensated piston pumps match flow to system demand. Your system will generate less heat, and may not need a heat exchanger. Your system can be kept simpler too, with fewer valves and regulators, while still maintaining constant pressure. For long term reliability, and optimum performance, PowrFlowT HPV Axial Piston Pumps are your best value. Heavy Duty Construction Designed for rugged use in industrial and mobile applications. Beefed up case also contributes to reduced sound levels for quiet operation.

PowrFlow Piston Pumps Standard SAE 2-Bolt Flange Mount Available in right or left-hand rotation.
Readily interchangeable with other piston pumps.
Nine Piston Rotating Group Provides smooth power and quiet operation.
Individually replaceable pistons.
Replaceable Port Plate Simplifies servicing.
Ports are designed to reduce noise.
View Complete Details

PVR50 B 5L RF P Vane Pump

  • Weight 119.0000
  • Mounting 4 Bolt SAE D
  • Shaft Type Straight Key
  • Shaft Diameter 1 1/2"
  • Port Location Side
Continental Hydraulics' variable volume, pressure displacement, pressure compensated vane pumps are highly efficient and reliable sources of hydraulic power. As the rotor turns clockwise, the volume between two adjacent vanes (segment) increases at the suction porting. When these segments enter the pressure port area, the volume is reduced and forces the fluid out through the pressure port.

Maximum output occurs when the cam is in the extreme eccentric position. When system requirements are less than maximum pump output, system pressure forces the ring up (against the spring), reducing eccentricity and resulting in less flow. Constant pressure from zero to full displacement is maintained by the spring. When system volume demand falls to zero, the system pressure drives the ring to a concentric position. This changes the displacement to zero while system pressure is maintained.
View Complete Details

1 Gallon Accumulator Bracket, Clamp

  • Weight 2.2500
  • SKU 1-530-1
  • Manufacturer OLAER
Can be used with all types of accumulators (Bladder, Piston, Diaphragm), galvanized to resist corrosion, rubber insert provided to reduce mechanical vibration, and to compensate for shell manufacturing tolerances Can substitute VMB-66
View Complete Details

SP25A22A9H2-R Drive Shaft

  • Weight 10.6000
  • Shaft Type Straight Key
  • Key Size 3/16"
  • Shaft Type: Straight Key
  • Mounting SAE B, 2-Bolt
Gears and drive shaft are hardened alloy steel of one piece construction.

Special gear design: Non-symmetrical gear insures low noise and compactness. Highest Quality Workmanship. Pressures Up To 3000 P.S.I.

Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance, extremely efficient.

Perfect alignment: "Through bore" design provides perfect alignment of pump element and assures even bearing load. With the aluminum alloy casing, the SP Series features lightweight and easy handling.

Double pumps: Available in SP20, SP25 and SP25SP20 combinations. Maximum speed from 3000 to 4000 RPM using SAE 10W oil. Displacement covers .400 in3rev. to 3.869 in3rev.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Wojanis Hydraulic Supply Company, Inc.)
  • Coraopolis, PA 15108-9308 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/wojanis-hydraulic-supply-company-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0016458056{main}( ).../index.php:0
20.07872024432include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.23952747152include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.24803682864header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice