Post Your Requirement Menu

Welcome User

Other Products / Services

Our product range comtains a wide range of Model 94 Metal Plate Indenting Machine, M10 HE Metal Plate Embosser, U-marq GEM-CX5 Engraving Machine, T-20 Metal Strip Tag Embosser and MDM1000 DM 2D Metal Data Matrix Barcode Marking Machine

Model 94 Metal Plate Indenting Machine

The Model 94 Heavy-Duty Press provides for indenting a variety of items with numbers and letters. •Mono Character Wheel •Automatic Character Spacing •Suited for stamping codes in which each part requires a different code •Easy to operate •Plates with unlimited height and up to 7" in width can be stamped 4-38" from the top of the plate •Various nests, strip holders, and slides can be custom manufactured for use with the Model 94 The Model 94 allows stamping with larger type up to 38". Also punches much deeper than the 40BP. Ideal for applications where a large plate is welded to the material. Operation The operation of the Model 94 is very simple. Depth of impression is adjustable by a knurled nut on the bottom of the press. The table is adjusted up or down for the proper depth. The operator rotates the dial and pulls the lever to stamp the chosen character. Upon release of the lever the table spaces one character space. The procedure is repeated until the line is completed. A "half stroke" of the lever produces a blank space. The table insert is moveable in or out without disturbing the clamped parts. Graduated lines are stamped into the left side of the table insert in 116" increments. An arrow is stamped into the guide rail to be used as a reference point. There is a stop for setting the left hand margin. At the end of the line, the operator depresses the lever a half stroke. the table can then be moved to the right manually, against the margin stop.

View Complete Details

M10 HE Metal Plate Embosser

M10HE is the entry level metal plate embossing system from CIM. It is the ideal low cost alternative for users who frequently need to personalize small quantities of metal plates and tags as well as military ID-tags (Dog Tags) and cable tags, hose tags, and more. Its portability makes it particularly suited for field operation. It comes equipped with 60 character drum and single character spacing rack. Portable, yet robust and compact. Entirely manual and can be used anytime, anywhere. No power supply required. Ideal for military ID tags (dog tags) and medical warning tags. Also great for cable and part identification tags. Will stamp stainless steel, carbon steel, aluminum, copper and brass. Light weight – ONLY 28 lbs. with a sturdy case and easy to carry built in handle. Truly portable. Designed and built by the #1 supplier to the US Military with quality materials to ensure years of trouble free service.

View Complete Details

U-marq GEM-CX5 Engraving Machine

The U-MARQ GEM-CX5 with its newly designed controller electronics, faster CPU, support for USB 2, more efficient drives (using less current), completely re-written firmware and more efficient drivers. With re-designed cylindrical drive providing more power and accuracy. New pre-loaded linear rails for longer life plus many other minor improvements. Designed for the countertop or workshop, for customers who have higher demands, the GEM-CX5 is an easy to use engraving solution. It is easy to set up and use in any retail shop or other environment, where fast and efficient engraving of single or multiple items are needed. It is capable of engraving anything from the finest bracelet to a large size door sign or tankard as well as glass items and trays.

View Complete Details

T-20 Metal Strip Tag Embosser

The Model T-20 is the heavy duty model which embosses 78" tape with characters 38" high. The data on the tag will remain legible despite the ravages of weather, under grease and grime, repeated coats of paint, and even after years of underground or underwater service. It is tablesized, has a cast aluminum body, weighs approximately 57 lbs. and can be moved from place to place with ease.

View Complete Details

MDM1000 DM 2D Metal Data Matrix Barcode Marking Machine

MDM1000 DM metal marking machine does everything the standard MDM1000 does plus it will produce 2D Data Matrix Barcode. Complete with special software for 2D Data Matrix barcode management. The MDM1000 DM dot peen marker will give you tremendous flexibility in marking your metal tags. A cost-effective alternative to stamping and dies, dot peen words on the tag's surface in any true Windows-type font as well as produce logos and other graphics. Reliable stylus stamping for logos, Windows fonts and special characters of all sizes The MDM1000 DM is a manual feed metal plate dot matrix marking machine. Stamps special characters such as country specific characters and symbols. Suitable for a variety of metals, including aluminum, copper and brass. The MDM1000 DM can be operated with a PC, main frame (RS232 communication port) or offline with a keyboard. Our software SWORDTM is also included

View Complete Details

Aluminum Embossing Tape Five Sixteenths Inch

Aluminum embossing tape 516" x 85 feet. .015" thick. 14 rolls per carton. Price is for a carton of 14 rolls. Our tapes are supplied in convenient, pre-measured rolls, easy to load. They are specially controlled for width, thickness and temper of material.

View Complete Details

Acetyl Nose Cones

Replacement Acetyl Nose Cones used to regulate the depth of cut when deep engraving, available in three types : Small : for use when engraving text or grapics using a fine size cutter. Medium : for use when engraving text or grapics using a medium size cutter. Extra Long : specially made for use when engraving trophy plinths. To use this accessory on the GEM-RX5 and GEM-FX5 you will have to have purchased the Acetyl Vernier Adapter (part no. AC-00102 ). On the Universal engraver these accessories fit the standard stainless steel Vernier.

View Complete Details

Universal Nest for Model 40B

Universal Nest (Tag Holder) This amazing device allows you to place and hold tags of any shape and size. Also allows stamping on almost the entire surface of the tag. No need for individual nests. The Universal Nest will hold round tags, octagon tags, hearts, circles and more. Will also work with keys.

View Complete Details

Universal Key Nest for Model 40B

Universal Key Nest (Key Holder) (not shown) Keys can be inserted on the left or right side depending on blank style. The neck of the key is pushed down until the head of the key comes in contact with the stop block. The spring-loaded gate holds the key against the stop block for the stamping operation.

View Complete Details

100mm Face Plate

100mm Face Plate and Rubber, fits all U-MARQ Universal engravers. 50mm Face Plate and Rubber, fits all U-MARQ Universal engravers.

View Complete Details

100mm Face Rubber

100mm Face Plate and Rubber, fits all U-MARQ Universal engravers. 50mm Face Plate and Rubber, fits all U-MARQ Universal engravers.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Des Plaines, IL 60016 map, United States