Post Buy Requirement
ZS
United States
Add Review

Our Products

6 Zone Portable Power Control Consoles

  • Dimensions H 4 x W 2 x D 2 feet
  • Weight 600 lbs
Control unit: 6, 1 master, 5 slave controllers
Input Power: 480 VAC, 3 Phase, 100 Amp
Transformer: One 72 KVA fan cooled
Output Power: 85 VAC, single phase, 135 Amp each zone
Temperature Recorder: 6 point
Power Control: Ammeter with 6 point selector switch
Dimensions: H 4 x W 2 x D 2 feet
Weight: 600 lbs
View Complete Details

Gas Trains

The Zentech gas trains contain the equipment necessary to perform internal fired post weld heat treatment. The gas train can be run automatically or manually, and the temperature controller ensures the proper temperature is maintained throughout the heat cycle by regulating the flow of gas to the burner. The high limit controller assures that the maximum allowable temperature will not be surpassed. The built in safety features check for correct fuel pressure, monitor the flame in the burner and shut down the fuel supply in the event of flame loss. Safeguards contingency features are managed through alarms and flame safety equipment built in the gas train.
View Complete Details

Temperature & Process Controls

  • Series 9300
With the highest input resolution for like products, fast scan rate and proprietary Fuzzy Logic Auto Tune the 300 Series provides world-class control performance.
View Complete Details

Ramp/Soak High Performance Controls

  • Series P-41 & 91
Packed with performance and features meeting simple or complicated OEM applications, the P Series provides an unrivaled value.
View Complete Details

Temperature Limit Controls

  • Series L41
Future Design Controls FM Approved L41 is a 14 DIN control designed to provide limit protection in process applications where FM approvals are required. The L41 is the right choice for safety protection.
View Complete Details

Flexible Ceramic Pads

Zentechs FCP's consist of a multi-strand 8020 nickel chrome resistance wire encased with 98.2% alumina. These Alumina beads have excellent high-temperature dielectric properties. The beads are designed to interlock to eliminate wire exposure. The FCP's are designed for safe, low voltage operation. The flexibility of the heating elements enables them to wrap around the curved surfaces of pipes and pressure vessels. FCP built with nine inches long nickel cold tail. Nickel wired fused each end of the resistance wire with 60 amp camlock connectors. Cold tail enables safe connectivity during the heating operation.

FCP's are typically secured with stainless steel banding, in some instances this is not practical, the alternative is to secure the FCP's with stud nails. The stud nails are attached to the surface of the metal via capacitance discharge method. The capacitance discharge attachment procedure involves using a stud welder to attach a 12 gauge stud nail to the work piece.
View Complete Details

Thermocouple Attachment Units

  • temperatures 2300°F
To measure the surface temperature of a metallic workpiece, get the most reliably accurate temperature measurement by turning the workpiece surface into a thermocouple junction with the use of a Thermocouple Attachment Unit (TAU).

The TAU is a major improvement over other methods for attaching thermocouples to both ferrous and non-ferrous metals and attaches thermocouples directly to the workpiece. It also handles high temperatures, up to the 2300F required for stress relieving carbon and low alloy steels. The TAU is portable and very rugged. The unit attaches thermocouples quickly so that heat treating can be done promptly to get you back online quickly.
View Complete Details

Pin Welders

  • materials 20 gauge
The CD 70 Stud Welder is designed specifically for the insulation contractor. In fact, it is one of the most powerful capacitor discharge units available today. The CD 70 features a separate cup head weld pin contact mode that welds to materials as thin as 20 gauge - without fear of burn through. A unique feature is the 84, 000 to 168, 000 MFD variable capacitance highlow power range switch which handles the toughest applications. The high power range helps eliminate surface preparation when welding "Power Tip" pins.

The unit's solid state circuitry lowers maintenance costs, since moving parts are eliminated. And the rugged steel chassis makes the CD 70 able to withstand the rigors of construction jobsites. Gauges and control knobs are protected by a recessed control panel. Circuit breaker protection prevents expensive repair to component parts, such as printed circuit boards. The auto fault shut-off adds to operator safety, and the panel meter displays capacitor discharge voltage at a glance.

An ultra-light 24 ounce precision Contact Gun is included with the CD 70 system. With this Gun, operator fatigue is reduced --- thereby increasing production. The weld gun also features interchangeable main spring pressure that is necessary for many special welding applications, and critical in welding aluminum fasteners and dissimilar material. The unique drilled-through gun shaft enables precise gun set up for welding aluminum pins and extra long CD weld pins. The CD 70 Capacitor Discharge Stud Welder
View Complete Details

Blowers

The blower provides air to mix with incoming gas to alter the temperature of the flame from the burner for proper control of the heat cycle. The blower is connected to the gas train, which in turn controls the flow of air provided for the burner.
View Complete Details

High Velocity Gas Burners

Designed to deliver more, ThermJet burners represent a technological leap forward in every area of design and performance that counts. ThermJet burners set new standards for velocity, emissions and flexibility.
View Complete Details

Paperless Recorders

  • Size 6.4"
  • Series VR Series
The VR Series Paperless Recorders, with its' 6.4" TFT display (largest display of any 100mm style paperless recorders), is one of the most advanced paperless recorder available.
View Complete Details

Triple Cable Sets

  • Type K 20 AWG
A triple cable is consist of two 100 foot long 2 AWG flexible lead and type K 20 AWG PVC sheathed shielded thermocouple extension lead. The cables built with 300 male and female comlocks. Thermocouple extension lead also have standard male and female connectors which saves tome during the set-up in the field.
View Complete Details

Splitter Cables

Splitter cables built with five foot long 6 AWG flexible leads. This cable allows multi heaters in parallel connection in the same zone circuit. Typically three heaters to be connected in parallel circuit.
View Complete Details

Thermocouple Wires

  • Type 20 AWG
  • temperatures 2300°F
20 AWG type K (Chromel Alumel) thermocouples nickel based and exhibit good corrosion resistance. It is the most common sensor calibration type providing the widest operating temperature range. Due to its reliability and accuracy the Type K thermocouple is used extensively at temperatures up to 2300F the thermocouples braded with high temperature fiberglass and has color coding. Each conductor is covered with a color coded, high temperature fiberglass braid. This braid is then impregnated to enhance abrasion resistance and reduce fraying. The insulated conductors are laid parallel and covered with another braid of high temperature fiberglass and impregnation.
View Complete Details

Camlock Connectors

Camlock electrical power connectors achieve an insulated locking connection with an approximate 12-turn for high-amperage circuits. Connector sets are available in panel mount and in-line styles.
View Complete Details

Thermocouple Connectors

The standard line of connectors is light weight, rugged and accurate and feature a clamping mechanism that is unique in the industry. This easy-to-use clamping connection will replace traditional screw and wire wrap. This device allows a straight-in application, which squeezes the wire and forms a tight connection assuring a clean, strong signal, to eliminate measuring errors, all Standard connectors are made exclusively of matching metal alloys. If the connector material has different thermal electromagnetic field (EMF) characteristics from the thermocouple or lead wire, a uniform temperature must be maintained across the connector, which is not always easily achievable or practical.
View Complete Details

Hardness Testers

Zentech offers a complete range of portable hardness testers for quick and convenient on-site hardness testing. Our hardness testing equipment range is comprised of portable instruments and a large number of probes and impact devices opening up extensive application ranges for every testing situation. In addition, our hardness equipment offers a quick and economical supplement to stationary hardness testing in the modern production process.

There are three physical methods of hardness testing recognized in the field: the static UCI (Ultrasonic Contact Impedance) method, the dynamic rebound hardness testing method, and the optical TIV (Through-Indenter-Viewing) method. The decision to utilize a specific method depends on the test problem.

The MIC 10 enables quick and convenient on-site hardness testing according to the UCI method (Ultrasonic Contact Impedance standardized according to ASTM A956 and DIN 50156). The diamond indent in the materials surface is electronically measured and instantly displayed without using the cumbersome optical evaluation normally associated with conventional hardness testers.

By pressing a key, you can display your reading as a single value or as the active arithmetical average value of a hardness measurement set. Editing of erroneous single values, without having to interrupt the measurement set, is just as simple. Adjustable alarm thresholds show you critical measurement values both visually and with audiable alarms. The calibration parameters for measurements on low and non-alloyed steel are preprogrammed into the MIC10; however, the instrument can be easily and quickly recalibrated to other materials. Instrument operation can be customized for specific testing requirements: unnecessary functions can be inhibited, e.g. various hardness scales or the recalibration capability. This reduces key presses and simplifies operation.
View Complete Details

Banding

Heavy duty tool, designed specifically for applications that require higher torque. For applications requiring extra strength. Tensions over 3, 300 pounds of force Used to apply Stainless Steel Band, Galvanized Carbon Steel Band, and miscellaneous strapping Tensions and cuts off the tail of the clamp being formed Drop forged tool with built in cutter. Spring loaded gripper lever improves ease-of-use, and improves band tensioning
View Complete Details

Ceramic Fibre Blankets

  • temperature 1260°C
Ceramics fibre blanket products are available in a wide range of chemistries, densities and thicknesses. Ceramics offers a wide range of fibre blanket products in a wide range of chemistries, densities and thicknesses. The blankets are air laid into a continuous mat and then are mechanically needled for added strength and surface integrity. The blankets exhibit the following characteristics: low thermal conductivity, excellent thermal shock resistance, low heat storage capacity, inorganic - smoke free.

Kaowool Blankets:
Made from bulk fibres produced by the most modern spinning process, giving exceptional length & uniform distribution which are ideal for manufacturing blanket of controlled density, high tensile strength and resiliency. Kaowool S & SZr both have temperature classification 1260C.

Cerablanket, Cerachem Blanket & Cerachrome Blankets
Excellent chemical stability compared with their raw materials, they have excellent strength before and after heating. They have superior acoustic as well as thermal insulation characteristics. Temperature classifications: Cerablanket 1260C, CeraChem & CeraChrome 1425C.

Maftec:
Made from pure mullite fibre only, needled on both sides and contains no binder or other added constituent. More resistant to acid and alkaline solutions than conventional alumino-silicate fibre blankets, being virtually free of shot, it has exceptionally good thermal insulation characteristics. Maximum continual use 1600C.
View Complete Details

Superwool Blankets

  • temperature 1300°C
Superwool Fibre blankets which are manufactured to offer excellent performance in high-temperature applications. The Superwool Fibre blankets offer an alternative to traditional solutions due to its high refractoriness and excellent non-wetting characteristics with molten Aluminum. They also provide stability and resistance to chemical attack; however, exceptions include hydrofluoric acid, phosphoric acid and strong alkalies (i.e. NaOH, KOH). Our Superwool Fibre blankets are unaffected by incidental spills of oil or water and their thermal and physical properties are restored after drying. These blankets are designed from pure raw Calcium-Magnesium-Silicate (CMS) raw materials and can be altered to achieve desired properties such as fibre diameter, shot content, fibre length and form. The Superwool Fibre blankets are ideally suited to individual customer applications and are available in a wide range of thicknesses and densities. The maximum continuous use temperature depends on the application.

Superwool 607 HT Fibre
The only biopersistent fibre available with a classification temperature of 1300C.

Superwool Plus Fibre
New and improved Superwool 607 Fibre. An Engineered solution which saves Energy and respects the Environment. Superwool PlusTM Fibre Blanket has excellent thermal stability and retains its original soft fibrous structure up to its maximum continuous use temperature.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Zen Zochniak (Zentech Services LLC)
  • 3120 Holyoke Court, United States
  • Share us via