Post Your Requirement Menu

Welcome User

Other Products / Services

We offer a complete product range of 10 INCH RADIUS AND ANGLE DRESSER 3800-5227, PRECISION SMALL PUNCH GRINDER(.020.236 INCH) 3800-5150, VISI-DRESS RADIUS & ANGLE DRESSER 3900-0060, 11 INCH RADIUS AND ANGLE DRESSER 3800-5225 and 3-3/4 X 1/8 X 1-1/4 INCH D11V9 FLARING CUP DIAMOND WHEEL

10 INCH RADIUS AND ANGLE DRESSER 3800-5227

  • Overall Height 6.3"
  • Overall Length 13"
  • Net Weight (lbs.) 26
  • Weight (lbs.) 26.0000
  • Convex Range 0.8R~40R

Positive setting of the diamond to absolute center with the special gauge included with the dresser. Simple, fast, accurate redius setting; no height gauge or other set-up aids required. Radius is set on the grinder by measuring over the two pins or by inserting a gauge block, as shown, for direct reading. Inside or outside radius is determined simply by sliding the dowel pin to the right for concave and to the left for convex. 4x90 o graduation in full 360 ocircle. 6 minute vernier reading. One push-pull type knob for radius and angle control and for safer and faster operations. ACCURACY, extremely close tolerances are held in the manufacture of this tool, assured by hardening and precision grinding of all critical parts. Ways are chrome hardened. ECONOMY, set-up & dressing time reduced to a bare minimum due to simplicy. 26 lbs. Made in TAIWAN

View Complete Details

3-3/4 X 1/8 X 1-1/4 INCH D11V9 FLARING CUP DIAMOND WHEEL

  • Wheel Diameter 3-3/4"
  • Wheel Thickness 1-1/2
  • Diamond Depth 1/8
  • Back Thick 3/8

100% concentration. Arbor Hole: 1-14" For tool and cutter applications including sharpening of end mills, reamers, milling cutters and broaches.

View Complete Details

6 X 1/16 X 1 X 1-1/4 INCH 75% 6A2C PLAIN CBN WHEEL

  • Wheel Diameter 6"
  • Wheel Thickness 3/4
  • Diamond Width 1
  • Diamond Depth 1/16

With countersunk bolt holes Mount on popular 6" carbide grinders Use for off-hand grinding on brazed tipped carbide single point turning tools. Back Thickness: 716" Arbor Hole: 1-14" STYLE 6A2C 75% CONCENTRATION CBN (120 Grit)

View Complete Details

F320 GRINDING WHEEL ADAPTER 2420-0320

  • SKU 2420-0320
  • Weight (lbs.) 0.8000

Features 1" diameter at large end of taper Hardened and ground Heat treated nuts For 1-14" I.D. wheels

View Complete Details

F350 GRINDING WHEEL ADAPTER 2420-0350

  • Wheel Width 1/4~3/4
  • SKU 2420-0350
  • Weight (lbs.) 2.0000

Hardened and ground Heat treated nuts For 1-14" I.D. Wheels Adapter O.D.: 3" Balance adjustable Wheel width capacity: 14 to 34" 1" diameter at large end of taper hole 1-14"-16 thread Heat treated and precison ground

View Complete Details

PRO QUALITY PRECISION PUNCH GRINDER 3600-0037

  • SKU 3600-0037
  • Weight (lbs.) 17.0000

Can be used on the surface of grinding machine for round punches (0.12" ~ 1.18" dia.). Punches can be ground by putting among three rollers of punch grinder without checking the center. Accuracy of Roller (Turning Right or Left): 0.0002" Accuracy of Point A (Turning): 0.000197" Accuracy of Point B (Turing): 0.00031" 0.12~1.18" DIA. CAPACITY Made in TAIWAN

View Complete Details

PRECISION SMALL PUNCH GRINDER(.020.236 INCH) 3800-5150

  • Accuracy of the rollers within 0.0002"
  • Diameter of punches can be ground 0.020~0.236"/0.5~6.0mm
  • Net Weight 6 lbs.
  • SKU 3800-5150
  • Weight (lbs.) 6.6500

Punch grinder can be placed on the bed of surface grinder for automatic precision cylindrical grinding. Punch grinder rollers are used to adjust the workpiece before grinding. Workpiece is turned with a crank handle. 0.020~0.236" DIA. CAPACITY Made in TAIWAN

View Complete Details

VISI-DRESS RADIUS & ANGLE DRESSER 3900-0060

  • Overall Height 4"
  • Length 8-1/4"
  • Max. Size Grinding Wheel 8"
  • Weight 11 lbs
  • Weight (lbs.) 8.8000

1° Vernier markings for dressing angles. Magnification through hole in the spindle, makes it possible to see how to dress the form on the grinding wheel. Dresser is tested and guaranteed for accuracy. Made in TAIWAN

View Complete Details

11 INCH RADIUS AND ANGLE DRESSER 3800-5225

  • Overall Length 15.30"
  • Overall Height 5.90"
  • Net Weight (lbs.) 27
  • Weight (lbs.) 27.0000

Perfect for outside, inside diameter and surface grinding operations. Extreme accuracy and versatility is assured with dual purpose knob for radii and angular movements. Unique design features a fast, easy and accurate radius setting with included setting gauge. Stop feature available for concave and convex radii. Lapped moving parts and adjustable gibs take up future wear. MAX. VARIATION Face Plate to Dresser Arm Squareness (per 2"): 0.0005" Face Plate to Base Squareness: 0.0006" Center Runout of Dovetail Groove to Wheel Center: 0.0006" 27 lbs. Made in TAIWAN

View Complete Details

F450 GRINDING WHEEL ADAPTER 2420-0352

  • SKU 2420-0352
  • Weight (lbs.) 1.9500

F450 is used in cylinder of US standard grinding machines Hardened and ground. For 1-14" I.D. grinding wheels. Wheel width capacity: 14 to 34" 1" diameter at large end of taper hole Made in TAIWAN

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Chino, CA 91710 map, United States