Ace Stainless Supply

United States

Use with dairy, water, and air, except the tri-clamp to threaded pipe adapters are not for use with dairy. They can be sterilized with steam (autoclaving). Not rated for vacuum. Note: To complete the connection, these fittings require a clamp and a gasket. These sanitary ferrules do not work with our automotive V-Band clamps. Polished to a 32Ra finish on the OD and to a 23Ra-32Ra finish on the ID. Our sanitary fittings meet the 3-A Sanitary Standards Number 63-03. The 3A Sanitary Standard was created by the dairy industry as a voluntary benchmark for product performance and sanitary safety. The standard, collaboratively developed by a group of processors, suppliers, regulatory officials and sanitation specialists, is generally accepted by federal, state and local regulatory authorities.

Use with dairy, water, and air, except the tri-clamp to threaded pipe adapters are not for use with dairy. They can be sterilized with steam (autoclaving). Not rated for vacuum. Note: To complete the connection, these fittings require a clamp and a gasket. These sanitary ferrules do not work with our automotive V-Band clamps. Polished to a 32Ra finish on the OD and to a 23Ra-32Ra finish on the ID. Our sanitary fittings meet the 3-A Sanitary Standards Number 63-03. The 3A Sanitary Standard was created by the dairy industry as a voluntary benchmark for product performance and sanitary safety. The standard, collaboratively developed by a group of processors, suppliers, regulatory officials and sanitation specialists, is generally accepted by federal, state and local regulatory authorities.

Our 304L Stainless Steel pipe nipples are a high quality, cost effective threaded solution for industrial, construction, plumbing, and more. Our nipples are ASTM A773 and ASTM A312 compliant and are offered in nominal pipe sizes from 18" to 6" in both 304L and 316L stainless. Please contact us if you need super alloys such as Duplex, Hastelloy, and more.

12"-13 x 3-34"" Wedge Anchor 316 Stainless Includes one (1) flat washer and one (1) finish hex nut per anchor.

Our AceLok compression fittings feature:* Double Ferrule Swaging Action* ASTM Material Construction* Corrosion Resistant 316 Stainless Steel Product Line Notes: 1) The usable temperature range of AceLok stainless steel compression fittings is -40F to 200F (-40C to 93C). 2) Pressure limitations are determined by the tubing, not the fitting.

Service note: All elastomer gaskets require periodic replacement. Gasket life is influenced by the gasket material, product application, temperature, cleaning procedures, etc. After monitoring gasket conditions in a process system, a schedule should be developed for replacement of gaskets. Shelf life note: The shelf life of rubber gaskets is the maximum period from the cure date to the date the product is installed. During the shelf life time, the rubber product is expected to retain its characteristics under the following conditions: Stored in original packaging in a clean, dry warehouse.Not exposed to direct sunlight.Stored no closer than 6 feet from electric motors. Temperature between 65F to 85F. Our sanitary fittings meet the 3-A Sanitary Standards Number 63-03. The 3A Sanitary Standard was created by the dairy industry as a voluntary benchmark for product performance and sanitary safety. These gaskets also meet USDA and Title 21CFR177.2600 & .1550 standards

For use with air, water, oil, natural gas, steam. Maximum Pressure: 150 psi @ 72 F; 150 psi @ 366 F for steam Our low-pressure 150# threaded stainless steel fittings should be used with schedule 40 threaded nipples and pipe