Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of ALDOCOAT 395 Silicone coating, ALDOCOAT 397 Silicone HB, ALDOCOAT 384 Polyurethane Aluminum, Thermoplastic Coating and BASF SPRAYTITE INSULATION.

ALDOCOAT 395 Silicone coating

  • Model No. 395

ALDOCOAT 395 is a one-part silicone elastomeric coating specifically designed for use in roofing applications. Once cured this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement , shear and will allow for normal expansion and contraction. Mil for mil, ALDOCOAT 395 provides greater UV protection than similar coatings and offers increased resistance to moisture penetration. ALDOCOAT 395 provides excellent long term protection through exceptional weatherability properties. Recommended Uses ALDOCOAT 395 was specifically developed as a protective coating for metal roofs, single ply membranes, granulated modified bitumen and sprayed-in-place polyurethane foam roofing. ALDOCOAT 395 is also used as a top coat over ALDOCOAT 384 Polyurethane in membrane restorations. With excellent adhesion to all substrates and exceptional durability, ALDOCOAT 395 is proven to provide excellent solar reflectivity, UV protection and long term waterproofing performance.

View Complete Details

ALDOCOAT 397 Silicone HB

  • Model No. 397

ALDOCOAT 397 is a high yield, low VOC, one-part silicone elastomeric coating specifically designed for use in roofing applications as a protective coating over a variety of roofing substrates. Once cured this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, ALDOCOAT 397 provides greater UV protection than similar silicone coatings and offers increased resistance to moisture penetration. ALDOCOAT 397 provides excellent long term protection through exceptional weatherability properties.

View Complete Details

ALDOCOAT 384 Polyurethane Aluminum

  • Model No. 384

ALDOCOAT 384 is a technologically advanced, high solids, single component, moisture cure polyurethane elastomer coating uniquely formulated for the protection of spray polyurethane foam insulation and traditional roofing substrates, such as single ply membrane and BUR surfaces. Once cured this liquid applied moisture-curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, ALDOCOAT 384 provides greater UV protection than similar generic coatings and offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure properties, a longer production window can be achieved during application.

View Complete Details

Thermoplastic Coating

  • Model No. 660

ALDOCOAT 660 is a thermoplastic copolymer butyl rubber elastomeric vapor retarder coating uniquely formulated for the protection of metal, aged BUR, wood, concrete and other substrates. The ALDO proprietary formulation incorporates elastomeric rubber and selected additives tested for compatibility. Once cured, this liquid applied polymer provides an exceptionally durable, seamless, flexible waterproofing membrane that resists cracking through excellent elongation properties. As a result, it allows for thermal shock (normal expansion and contraction) that may take place within most structures. ALDOCOAT 660 Butyl provides valuable UV protection and offers superb resistance to any moisture penetration.

View Complete Details

BASF SPRAYTITE INSULATION

  • Model No. 178

SPRAYTITE 178 is a closed-cell polyurethane system utilizing an EPA approved, zero ozone-depleting, blowing agent. It is designedfor use in commercial and residential construction applications. SPRAYTITE 178 is compatible with most common construction materials, but can only be processed with BASF SPRAY 8000AFE 800A Isocyanate. Benefits Include: Superior insulation performance Control moisture infiltration Controls air infiltration Ease of application Non-fibrous Structural properties

View Complete Details

NCFI INSULSTARSPRAY FOAM SYSTEM

  • Model No. HFC-245

InsulStar® is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam system. This NCFI system has been formulated with highly insulating HFC-245fa as the blowing agent and contains an anti-microbial ingredient to inhibit the growth of molds. The InsulStar® insulation system is suitable for application on the exterior or interior side of Class I, II, III, IV, & V buildings as well as other insulation applications. It complies with AC 377 and is certified for application in ABAA projects. Distinguishing Characteristics: High R-Value Zero ODP Moisture Vapor Retarder – Class II @ 1.3” High Yields High Closed Cell Content Air Barrier, ABAA Certified Good Dimensional Stability Meets ASTM E-84, FS

View Complete Details

Premium Acrylic

  • Model No. 400

ALDOCOAT 400 is a high solids, technologically advanced, fire retardant, thixotropic, 100% acrylic elastomer uniquely formulated for the protection of spray polyurethane foam, metal, and a wide variety of other substrates. The proprietary formulation incorporates premium elastomeric acrylic resins, reinforcing laminar pigments and non-migrating fire retardants to produce a seamless, flexible, durable membrane having exceptional weatherability, ultraviolet and fire resistance. ALDOCOAT 400 acts as a “breathing” membrane allowing trapped moisture vapor to pass through the film while remaining impervious to exterior mass water penetration. The resultant tough, cured film provides good resistance to mechanical damage and chemical attack.ck

View Complete Details

BASF FE 348-2.8 Series Roofing System

  • Thickness 2.0 inches

FE 348-2.8 is an HFC-blown, Zero Ozone-Depleting (Zero-ODP), spray polyurethane foam (SPF) system designed for roofing applications. Approvals and Credentials: UL723 ASTM E-84* SPF Thickness – 2.0 inches Flame Spread Index – 55 Smoke Development Index – >500 FM Global Class 44704880 Florida Building Code Approval #FL 1493.1 Dade County Approvals 07-1120.02 Steel 07-1120.03 Concrete 07-1120.04 Recover 07-0402-03 Wood ICC Evaluation Service, Inc. ESR-2298M UL790 Non-Combustible Decks Class A at any SPF thickness Silicone, acrylic or urethane coatings Up to 3 : 12 incline Granules at 35 lbs per square (100 ft2) depending on configuration Combustible Decks Class B at 1 inch SPF thickness Silicone, acrylic or urethane coatings ½ : 12 incline Granules optional

View Complete Details

NCFI Spray Foam System

  • Model No. 10-011

CFI 10-011 is a two component, HFC-245fa blown, all PMDI based spray polyurethane foam system designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing system. NCFI 10-011 will be available in multiple speeds for use in varying temperature conditions. NCFI 10-011 has been formulated to spray at 2.8 pcf depending on lift thickness, and may be used in applications of the EnduraTech™ roofing systems. Distinguishing Characteristics: Excellent Cure and Overlap Adhesion High Yields High Closed Cell Content Good Dimensional Stability

View Complete Details

Silicone Sealant

  • Model No. 399

ALDOSEAL 399 is a high solid, low VOC, one-part silicone elastomeric flashing grade specifically designed for use in sealing roof penetrations, curbs, seams, flashing areas and any other roof top areas of possible water infiltration. ALDOSEAL 399 is also the sealant of choice for any roof system that has been previously coated with a silicone elastomeric coating. Once applied, this silicone flashing grade provides a durable, seamless and flexible system that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, ALDOSEAL 399 provides greater waterproofing protection than similar flashing grade silicone sealants and offers excellent resistance to moisture penetration.

View Complete Details

Skylight Coating

  • Model No. 730

LDOCOAT 730 is a specially formulated acrylic latex elastomeric coating to provide a clear waterproof, weather resistant, color stable membrane for the protection and renovation of skylights and other like surfaces. ALDOCOAT 730 will cure as a translucent coating and moderately hard to repel extremes in weather and contaminates from pollution. Recommended Uses ALDOCOAT 730 is recommended as a clear protective coating for a variety of surfaces which include but are not limited to fiberglass surfaces, such as skylights, masonry, concrete, plaster, brick, block, wood, stucco or architectural panels where a translucent coating product is desired.

View Complete Details

ALDOPRIME 624 SBS Primer

  • Model No. 624

ALDOPRIME 624 is a fast drying rust inhibiting primer designed also as a tie coat for dusty or porous surfaces to improve adhesion of the base coat products. ALDOPRIME 624 has been formulated to have exceptional adhesion to a diversity of substrates. ALDOPRIME 624 penetrates into the surface and provides good anchorage for base coat product in addition to inhibiting rust on oxidized surfaces. Once the topcoat has been applied, ALDOPRIME 624 enhances the properties of topcoat and provides increased resistance to mechanical damage and chemical attack.

View Complete Details

Polyurethane Sealant

  • Model No. 385

ALDOSEAL 385 is a technologically advanced, high solids, single component moisture cure polyurethane elastomeric sealant. In addition, ALDOSEAL 385 is a brush grade sealant and an excellent all-purpose sealer to address roof leaks onmost roofing substrates. ALDOSEAL 385 is produced in an aluminum gray color that allows for faster cure times than white sealants.Mil formil, ALDOSEAL 385 provides greater protection against leaks and water penetration than most sealants due to its tenacious adhesive properties, higher tensile strength and low vapor permeability values. ALDOSEAL 385 offers a wider window of application than water based acrylic sealants.

View Complete Details

Rust Inhibitor

  • Model No. 710

LDOPRIME 710 is a water based rust inhibiting environmentally friendly roofing primer developed to be used on corroded metal substrates. This product can be applied as a primer coat for a variety of roof coatings. ALDOPRIME 710 has excellent resistance to heat, cold, moisture and weathering. This primer also sets up quickly to allow the base coat of the desired elastomeric to be applied soon after application. Recommended Uses ALDOPRIME 710 may be used as a prime coat over primarily metal surfaces but can be also be applied to a wide range of substrates which include, but are not limited to, wood, metal, concrete, masonry, various single ply membranes, spray polyurethane foam and most commonly used roof coatings. It is pigmented gray to speed the curing process and increase roof surface temperature before application of spray polyurethane foam or roof coatings. The environmentally safe formulation makes ALDOPRIME 710 the ideal solution for applications and projects that require such.

View Complete Details

ALDOSEAL 1602 Seam Tape

  • Model No. 1602

ALDOSEAL 1602 is a pressure sensitive seam sealing tape with Dupont Sontara ® Fabric backing bonded onto 20 mils of Butyl Rubber adhesive. ALDOSEAL 1602 stays flexible, even at low temperatures, to allow for the expansion and contraction of the substrate. ALDOSEAL 1602 has an aggressive grip with superior adhesion to produce an immediate, water tight seal. Containing no harmful VOC’s, the product is environmentally safe. ALDOSEAL 1602 will save metal roof sealing cost under most metal system specifications. Recommended Uses ALDOSEAL 1602 is recommended for sealing horizontal metal roof seams, although the aggressive superior adhesion of the product allows for use over other substrates such as concrete, wood, brick, block, stucco, plastics or fiberglass.

View Complete Details

POLYURETHANE WHITE

  • Model No. 386

ALDOCOAT 386 is a technologically advanced, high solids, single component, moisture cure, bright white polyurethane elastomer coating uniquely formulated for the protection of sprayed-in-place polyurethane foam insulation and traditional roofing substrates, such as EPDM single ply membrane and BUR surfaces. Once cured this liquid applied moisture- curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, ALDOCOAT 386 provides greater UV protection than similar generic coatings and offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure propert

View Complete Details

ALDOBOND 767 Roofing Bonding

  • Model No. 767

ALDOBOND 767 is a specially formulated emulsion adhesive which provides a means of adhering ALDOFABRIC 272 Roofing Fabric to various roofing substrates, including concrete and smooth BUR, prior to application of acrylic coating. Recommended Uses ALDOBOND 767 is required as a component of the ALDOCOAT FM 4470 System as an adhesive for ALDOFABRIC 272 Roofing Fabric to roof substrates such as BUR, torch cap sheeting and concrete.

View Complete Details

ALDOFABRIC 272 Roofing Fabric

  • Model 272

ALDOFABRIC 272 is a non-woven, stitch bonded, reinforcing roof fabric manufactured with a acrylic resin finish to reinforce coating systems and create superior adhesion to a variety of substrates, including aging asphalt. ALDOFABRIC 272 provides increased protection against coating degradation and water penetration in all roof systems that contain areas that require such, including but not limited to panel gaps on metal roofs, cracks and openings in older BUR systems and various roof penetrations.

View Complete Details

ALDOSEAL 747 Butyl Sealant

  • Model No. 747

ALDOSEAL 747 is a single component vapor retarder thermoplastic seam sealer specially formulated to provide a waterproof, weather resistant membrane with excellent permeability and ultraviolet protection. ALDOSEAL 747 offers good elongation and tensile strength to resist lateral movement and allow for expansion and contraction of the substrate.

View Complete Details

ALDOSEAL 750 Acrylic Sealant

  • Model No. 750

ALDOSEAL 750 is a high quality, high solids, acrylic elastomeric seam sealer designed to bridge and seal seams, gutters, vent pipe flashings, air conditioning units and expansion joints for all types of roofing substrates. ALDOSEAL 750 has excellent weatherability and ultraviolet resistance. ALDOSEAL 750 also offers a flexible, durable sealer with excellent resistance to mechanical or chemical attack. Recommended Uses

View Complete Details

Multi Purpose Acrylic Primer

  • Model No. 708

LDOPRIME 708 is an multi purpose acrylic primer developed to promote superior anchorage for roof coating topcoats over a variety of substrates, in particular spray polyurethane foam while offering environmentally safe working conditions. ALDOPRIME 708 has excellent resistance to heat, cold, moisture and weathering. Recommended Uses ALDOPRIME 708 may be used as a prime coat over a wide range of substrates which include, but are not limited to, wood, metal, concrete, masonry, various single ply membranes, spray polyurethane foam and most commonly used roof coatings. It is pigmented black or dark gray to speed the curing process and increase roof surface temperature before application of spray polyurethane foam or roof coatings. The environmentally safe formulation makes ALDOPRIME 708 the ideal solution for indoor applications.

View Complete Details

Acrylic Contractor Grade

ALDOCOAT 374 is a high solids, technologically advanced, fire retardant, thixotrophic, 100% acrylic elastomeric uniquely formulated for the protection of spray polyurethane foam, metal, and a wide variety of other substrates. The proprietary formulation incorporates high solids elastomeric acrylic resins, reinforcing laminar pigments and nonmigrating fire retardants to produce a seamless, flexible, durable membrane having exceptional weather ability, ultraviolet and fire resistance. ALDOCOAT 374 acts as a “breathing” membrane allowing trapped moisture vapor to pass through the film while remaining impervious to exterior mass water penetration. The resultant tough, cured filmprovides good resistance to mechanical damage and chemical attack

View Complete Details

CELL POLYURETHANE INSULATION

  • Model No. FE 800A

ENERTITE US is a low-density open-cell spray-applied polyurethane (SPF) foam system designed for residential insulation applications. ENERTITE US is compatible with most common construction materials, but should only be processed with BASF SPRAY 8000AFE 800A Isocyanate. ENERTITE US Benefits Superior insulation performance Ease of application Non-fibrous Sound control

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Willi Kramer
  • 1604 N.Main St. Concord NC 28081, United States