Flowmeters And Thermometers #334317

The Avf7000 is Versatile Flow Meter Widely Used for Gases, Steam & Liquid Applications. There are No Moving Parts and Comes with Either Flange or Wafer Connection. Standard Configuration Comes with Local Indication for Flowrate and Total Flow as Well as a 4-20ma Output Function Output. the Electronics are Designed to Filter Out Erroneous Signals as Well as Noise Due Pipe Vibration.

We are offering positive displacement flow meter.
Apf810 series is designed in oval gear technology with digit display for totalizer & flowrate and providing scale pulse
and analog output.
Apf810 series oval gear flowmeters are both high accuracy and easily adaptable to most industrial applications.

Features
10 200 mm (38 8) lines sizes
handles viscosities up to 20, 000 cp
wide range of application
various process connection types available
4 digit (resetable) +6 digit totalizer (mechanical)
4-20 ma or pulse output
high accuracy of +-0.5% of reading(or+-0.2% of reading)
direct-reading register with reset

specification
size:10, 15, 20, 25, 40, 50, 80, 100, 150, 200 mm
flow range:0.03 340 m3hr
material:
body, cover & flange:cast iron cast steel s.s.304 s.s.316
oval gear:cast iron stainless steel 316
o-rings:viton
shaft sleeve:bronze graphite
register housing:aluminum alloy
max. Viscosity:0.3 200 cp (standard). 201 20000 cp (optional)
mechanical register:
4 digit totalizer (resetable)
6 digit + 1 pointer
resolution
0.01 liter (10 mm)
0.1 liter (15-25 mm)
1 liter (40 -80 mm)
10 liter (100 200mm)
protection class:ip65. Intrinsically safe, eex ia iic t5. Explosion proof, ex d iib t6
optional:
-heating jacket (heat oil or steam)
-strainers, t-type or y-type
-air vent, flange end

We are offering coriolis mass flowmeter alia oval gear flowmeter . Acf6000 series uses the coriolis effect as a technique for liquid mass flow measurement.
The acf6000 can measure most of the liquids; the infrared light sensor makes it easy for you to set parameters & change the display data. The double-c tube & double-d tube make it possible for the meter to be used in most liquid applications.

Features
can be programmed by infrared light sensor without opening cover
high turndown ratio of flow rate
it comes any flanges such as ansi, din, jis etc
excellent for high pressure application
simple for installation, commission and maintenance
self-diagnostic capabilities, cable faults, pipe vibration
high accuracy of +-0.2% of reading (or +-0.1% of reading)
with forward reverse flow rate measurement function

specification
sensor type:c tube (10-40mm) u tube (50-150mm)
size:10mm 200 mm (38 8)
flow range:0 1000 kghr 0 1106000 kghr
accuracy: +-0.2% +-zs of reading (standard)
+-0.1% +-zs of reading (optional)
accurac:y+-0.002 gcm3
temperature range:-40 deg.c to +125 deg.c (standard)
-40 deg.c to +250 deg.c (optional, separate only)
protection class:ip 67 explosion proof exde (ib) iic t6 (optional)
signal cable length:10m 100m
display:2 lines lcd with illumination
flow rate unit:gs, kgmin, kghr, thr, 5 digit
communication:rs485 (modbus protocol)
hart signal (optional)
max. Pressure:63 kgcm2

Apf810 series is designed in oval gear technology with digit display for totalizer & flowrate and providing scale pulse
and analog output.
Apf810 series oval gear flowmeters are both high accuracy and easily adaptable to most industrial applications.

Features
10 - 200 mm (38'' - 8'') lines sizes
handles viscosities up to 20, 000 cp
wide range of application
various process connection types available
4 digit (resetable) +6 digit totalizer (mechanical)
4-20 ma or pulse output
high accuracy of +-0.5% of reading(or+-0.2% of reading)
direct-reading register with reset

specification
size:10, 15, 20, 25, 40, 50, 80, 100, 150, 200 mm
flow range:0.03 - 340 m3hr
material:
body, cover & flange:cast iron cast steel s.s.304 s.s.316
oval gear:cast iron stainless steel 316
o-rings:viton
shaft sleeve:bronze graphite
register housing:aluminum alloy
max. Viscosity:0.3 - 200 cp (standard). 201 - 20000 cp (optional)
mechanical register:
4 digit totalizer (resetable)
6 digit + 1 pointer
resolution
0.01 liter (10 mm)
0.1 liter (15-25 mm)
1 liter (40 -80 mm)
10 liter (100 - 200mm)
protection class:ip65. Intrinsically safe, eex ia iic t5. Explosion proof, ex d iib t6
optional:
-heating jacket (heat oil or steam)
-strainers, t-type or y-type
-air vent, flange end

AVF7000 is a Vortex Flowmeter based on Von Karman theory of vortices generated by a bluff body in the pipe. The number
of vortices are linearly proportional to the volumetric flow in the pipe.
The AVF7000 is versatile flowmeter widely used for Gases, Steam & Liquid applications. There are no moving parts and comes with either flange or wafer connection. Standard configuration has local indication for flowrate and total flow as well as 4-20mA with HART signal and pulse output functions. The microprocessor design can filter out erroneous signals as well as interfence caused by pipe vibration.

FEATURES
Simplified setup and self-diagnostic functions
Auto. Temperature & Pressure compensation
4-20mA with HART signal and pulse outputs, user selectable
A very wide selection of sizes
Wide temperature range up to 420 oC
Non-volatile memory for setup and calibration

SPECIFICATION
Size:15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500mm
Communication:
HART or RS485 (MODBUS Protocol)
Material:
Stainless Steel 301 304 316
Accuracy:
Liquid:+- 0.7% of reading
Gas & Steam:+- 1.0% of reading
Process Connection:
Flange Wafer
Temperature:
-40 +280 Deg. C (Standard)
-40 +420 Deg. C (Optional)
Protection:
IP 65
Explosion Proof, Exd IIC T6
Intrinsically Safe, E ex ia IIC T4
Local display:
4 lines LCD
4 digit flowrate
8 digit Totalizer

We are offering portable ultrasonic flow meter.
Aliasonic auf600 series is a portable transit-time ultrasonic flowmeter with clamp-on transducers for non-invasive liquid measurement.
Based on microprocessor and programmable flow measurement technique which allows no interruption of the process flow and has low installation costs.

features
4 line lcd display flowrate, totalizer & signal condition
the flowmeter is designed with high accuracy +-1.0%
small sized(200 * 92 * 32mm) and light-weight(538 g)
wide range, velocities( 0.01 +- 32 ms)
ni-mh battery could support over 10 hours continuous operation
transducers suit for pipe sizes from 13 to 6000 mm
transducers include magnet devise, which can install on metal pipe without
mounting belt
data logger which records flowrate, date, total flow , signal condition. Etc
response time less than 1 second

specification
measuring principle:transit time difference
pipe size:
ss type : 15 mm 100 mm (12'' 4'')
ms type : 50 mm 700 mm (2'' 28'')
m type : 50 mm 700 mm (2'' 28'')
l type : 300 mm 6000 mm (12'' 240'')
pipe material:cast iron, stainless steel, ductile , iron copper, pvc, aluminum, asbestos, fiberglass. Etc
display:4 line lcd with illumination
enclosure:converter ip65 sensor ip68(submersible)
alarm: highlow with buzzer