Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

AI

American Industrial Co.
location United States

Write a Review
Call Now Call Now

Our Products

  1. Brackets

    2 Products available

  2. Steel & Steel Products

    1 Products available

  3. Pre Ink Stamp

    1 Products available

  4. Medical Equipment & Supplies

    1 Products available

  5. Gifts, Handicrafts & Artifacts

    1 Products available

  6. Automotive Spare Parts

    1 Products available

  7. Nuts Bolts And Fasteners

    1 Products available

  8. Stampings

    1 Products available

  9. Industrial & Engineering Products

    1 Products available

  10. Electrical Switches

    1 Products available
  11. Others Products 9 Products available

Our Products

Our offered Product range includes Metal Stamped Latched Assembly, Metal Stamped Base Assembly, ANNEALED STEEL STAMPED, STAMPED CUSTOM PLATE and Annealed Stamped Custom Ring.

Stamped Channel

Stamped Channel

  • Dimensions 8.348” in length x 0.254” in width x 0.125”
  • Material stainless steel
At American Industrial Company, we are equipped to handle large, complex jobs with expediency. Designed for use in an angled finish nailer, we fabricated the brad channel pictured here for a customer in the power tool industry. Our in-house die design capabilities enabled us to engineer a progressive stamping die to completely form the multiple bends and angled geometries in a single sequence of operations. Featuring 301 hard stainless steel construction, this component had finished dimensions of 8.348 in length x 0.254 in width x 0.125 in height. High throughput equipment combined with precision cut dies enabled us to hold tight 0.005 tolerances repeatedly throughout the entire 50, 000 unit production run. In-process visual and dimensional inspections validated conformance with the customer specifications.
View Complete Details
Ask Latest Price & Details
Stamped Jaw Assembly

Stamped Jaw Assembly

  • Dimensions 0.9” in length x 0.76” in height,
  • dimensional accuracy ±.0002”.
We fabricated this front jaw staple guide assembly according to very tight tolerance requirements precision was critical for accurate actuation of the stapling mechanism. We progressive die cut C1050 spring steel into the desired form and then gave the components a tumbled finish to clean and deburr. An austempering heat treatment to 44-50 RC improved the mechanical properties and eliminated the chances of the part distorting, even under repeated impact. We inserted the rivets, ground the components to precise dimensions and applied a bright nickel plated finish.
View Complete Details
Ask Latest Price & Details
Metal Stamped Probe

Metal Stamped Probe

  • tolerances ±.005”
Since our inception back in 1981, weve taken our focus of providing high quality stamped products, produced with quick lead-times and uncompromising quality, and expanded our operations into a state of the art 25, 000 sq. ft. facility. We understand that any stamping provider can claim they provide quality; we back it up with an ISO 9001:2008 certification. Our capabilities, along with our specialization in turnkey packages, have cemented us as a flexible and responsive leader in precision metal stampings, and have made us a trusted provider to a long list of customers.
View Complete Details
Ask Latest Price & Details
Stamped Muffler Cover

Stamped Muffler Cover

  • Dimensions 2.25” in length, 2.06” in width, and .042”
Since 1981, weve been providing comprehensive high quality manufacturing services to industrial verticals across the globe. Our ISO 9001:2008 certification solidifies our preeminence as one of the nations top providers of high volume, precision stamped products. In addition to world class quality in manufacturing, we also offer cost-effective solutions for high volume manufacturing that calls for fast and responsive shipping. This advantage was a big factor when a customer in the power tool industry needed a large quantity of muffler covers turned over in a short period of time. At American Industrial, we specialize in challenges, and were able to rise to the occasion to meet deadline. Part of our solution was to develop a progressive die stamping process that would streamline production and reduce cost by minimizing the need for secondary operations.
View Complete Details
Ask Latest Price & Details
Metal Stamped Latched Assembly

Metal Stamped Latched Assembly

  • Thickness 0.062”
  • dimensions 4.38” in length, 1.562” in width
  • tolerance ±.005”
This capability is a turnkey solution for many of our customers, and also includes the additional support required for various assembly operations. Our level of flexibility is what brought this customer from the power tool industry to us for the project shown on this page. The latch assembly highlighted here represents a high volume order that includes a number of precision fabrication processes, as well as the complete assembly of four discrete components. These parts include a spring clip, spring pin, lever, and pin. The finished assembly was designed for use as a latching mechanism on a power tool application. It featured dimensions of 4.38 in length, 1.562 in width, and 0.062 in thickness. The manufacturing process included fabrication tooling based on the customer supplied drawings and specifications. Progressive die cutting was completed on one of our high speed punch presses.
View Complete Details
Ask Latest Price & Details
Metal Stamped Base Assembly

Metal Stamped Base Assembly

  • dimensions 8.00” in length x 1.50” in width x 2.00””in height.
The diversity of our capabilities and production capacity allows us to support the production requirements of applications for wide variety of industrial markets. Originally established in 1981, we have developed our focus and expertise in metal stamping. Our operation is geared for high precision production, high volume, and long-term contract orders. Over the years, this commitment to the whole project has enhanced our ability to support front and back end operations, including design, full product development, assembly, and logistical support. We presently operate out of a modern 25, 000 square foot facility which is located just 30 minutes from Chicagos OHare Airport. This is a distinct logistical advantage, which has made us a favorite among manufacturers across the globe. In the project shown here, we created a base assembly for a customer that manufactures a long line of power tools that are used in many industries. Because we have a well-equipped facility and a technically astute engineering and manufacturing team, we were able to use and optimize a wide range of fabrication processes to create the components for this project.
View Complete Details
Ask Latest Price & Details
ANNEALED STEEL STAMPED

ANNEALED STEEL STAMPED

  • Dimensions 8.00” in length, 4.00” in width, and 2.00” in height
  • tolerance ±.005”
At American Industrial, we operate a state-of-the-art, 25, 000 square foot metal stamping facility that is among the most advanced in the industry. However, the real benefit of doing business with us is working with our highly experienced staff of engineers, machinists, and technicians. This team of specialists understands the stamping industry, and can assist your project with high quality, flexible and cost-effective production solutions. Since our founding in 1981, weve risen to become the go-to source for customers around the globe who need convenient precision stamping and die cutting services. One of the factors that has built our positive reputation is our commitment to quality. This is cemented by our ISO 9001:2008 certification, which is a testament to our dedication to products and processes that instill confidence with our clients.
View Complete Details
Ask Latest Price & Details
STAMPED CUSTOM PLATE

STAMPED CUSTOM PLATE

  • measured 0.96” in width x 3.85” in length
  • tolerance ±.005”
This product was designed for use in a bearing application, and would have to meet stringent guidelines for quality and precision. Performing work for clients in the bearing industry requires a good understanding of materials and their limitations; in this case, the part was formed from SAE 1070 carbon steel. 1070 Steel is commonly used for this type of application. It has a number of benefits, foremost its strength and ductility. SAE 1070 has just the right combination of both to make it ideal for this application. The customer in this case provided us with detailed specification for the finished part. From these specs, we developed a highly detailed design and production process that utilized innovative solutions that delivered real-time production efficiencies. These would enable us to produce 75, 000 units within a two-week turnaround.
View Complete Details
Ask Latest Price & Details
Annealed Stamped Custom Ring

Annealed Stamped Custom Ring

  • tolerances ±.0005″
  • diameter 3.0″
  • thickness 0.403″
In the project highlighted here, we were contracted by a customer in the power tool industry to manufacture a custom retaining ring and sleeve. This project represents a high volume run, consisting of a total of 750, 000 finished pieces. Production started as usual, with well-designed dies. The die set was used on one of our high speed and highly advanced stamping presses. With this type of volume, speed would be critical, as well as precision. Our cutting edge equipment enabled us to achieve the fast cycle times we needed to be profitable, as well as meeting the very tight tolerances of .0005 that the customer required. The finished retaining ring and sleeve featured final dimensions of 3.0 in diameter and 0.403 in thickness. Another factor in the success of this project was the material selection; these parts were formed from 1050 annealed steel.
View Complete Details
Ask Latest Price & Details
Metal Forging Auto Parts

Metal Forging Auto Parts

  • Dimension 6.469” in length x 1.53” in height.
  • tolerance 010”
Designed for use in a nail gun, American Industrial Company manufactured the upper yoke shown here for a customer in the power tool industry. To produce the part, our die engineers designed a multi-station progressive die for use on our straight-side press. They created intricate features, including complex over forms and shear forms, to reproduce the precise geometry accurately and repeatedly over a 10, 000 unit production run.
View Complete Details
Ask Latest Price & Details
Brass Inserts

Brass Inserts

  • dimensions 1.360” in length x 1.459” in height
  • thick. 0.015”
With our expertise for manufacturing small, thin gauge stamped parts with precise dimensional tolerances, American Industrial Company was contracted to produce the brass inserts shown here for a customer in the plastics industry. From die design and construction to blanking, forming, and die cutting, we fabricated 10, 000 of these components within a two-week timeframe. Constructed from 7030 conductive brass, they featured dimensions of 1.360 in length x 1.459 in height and measured only 0.015 thick. Tight control of production parameters, combined with systematic in-process inspections and various other quality management tools, allowed us to achieve tight .004 tolerances throughout the entire production run.
View Complete Details
Ask Latest Price & Details
Metal Stamp Pneumatic

Metal Stamp Pneumatic

  • tolerances ±.010”
Repeatability is the name of the game, and is what differentiates a good metal stamper and great metal stamper. Since 1981, weve been developing our stamping services and investing in cutting edge manufacturing systems to ensure that our customers think of us as a great metal stamper. As the demand for precision in every industry grows, a state-of-the-art manufacturing solution is the only way to assist commercial and industrial customers to achieve their product goals. At American Industrial, we are committed to providing these types of services and more. Our commitment is highlighted in our ISO 9001:2008 certification. Our 25, 000 sq. ft., facility is state-of-the-art and designed for the needs of todays manufacturing customers. We are equipped with a vast array of stamping machines and equipment, and are located only 30 minutes from Chicago OHare, which gives us a distinct logistical advantage. It has also allowed us to quickly produce thousands of precision stampings every day, and ship them to customers across the country and around the globe.
View Complete Details
Ask Latest Price & Details
Progressive Die Stamped Wear Plate

Progressive Die Stamped Wear Plate

  • Thickness .062”
  • dimensions 4.38” in length, 1.562” in width,
Since 1981, weve been providing contract manufacturing services to customers across a wide range of industries. Each project or application for which we provide stamping services is centered on precision manufacturing and superior customer service. Part of our commitment to excellence is the ISO 9001:2008 certification of our 25, 000 square foot facility, located in Chicago. This is a truly advanced manufacturing facility that is specifically designed to accommodate the production needs of high volume, complex jobs that require precision and accuracy. These capabilities were brought to bear in the project highlighted here. This nose wear plate is designed for use in a power tool application. It was designed and fabricated with the right combination of strength, hardness, and toughness to stand up to heavy duty use and provide a long service life. The ingenuity of our engineering team enabled us to develop a progressive die stamping process that created all of the tight tolerance bends, angles, radii, and channels on this geometrically complex part. The wear plate was manufactured from cold rolled tempered steel.
View Complete Details
Ask Latest Price & Details
Cold Rolled Steel Stamped Bracket

Cold Rolled Steel Stamped Bracket

  • measured 2.7921” in length, 1.6467” in width, and 0.5” in height
  • tolerances ±.005”
Since our founding in 1981, we have become a single source solution for stamping services. Our capabilities and production capacity is vast, and is geared to handle the most demanding applications. This is possible due to our state-of-the-art 25, 000 square foot facility, located in Chicago, Illinois. It is also the result of a deep commitment to providing the best value and highest quality products in the industry. This commitment is exhibited in our ISO 9001: 2008 certification. The frame bracket which is pictured here was created for one of our long time customers that manufactures tools for the tattoo industry. Because of the ultimate use of the finished product, which is akin to a medical device, high precision and durability were a must. As a full service, technology-forward company, we have the skills and equipment to use a variety of manufacturing strategies for the efficient production of virtually any sized order.
View Complete Details
Ask Latest Price & Details
Chromate Plated Custom Bracket

Chromate Plated Custom Bracket

  • tolerance ±0.010”
  • measured 1.25” in length and 2.0” in width
We operate a facility and quality program that is ISO 9001:2008 certified. Our Chicago facility is conveniently located in close proximity to OHare Airport. This added logistical advantage lets us respond to your needs quickly and effectively, and adds further value to our wide range of capabilities. One of our specialties is servicing customers in the automotive industry. This vast industrial vertical demands quality, precision, and on-time delivery. Our reputation for upholding these critical capacities is what brought them to us for this project.
View Complete Details
Ask Latest Price & Details
Metal Stamped Custom Switch

Metal Stamped Custom Switch

  • Thickness 0.2”
  • diameter 0.416”
  • tolerances ±.001”
This ability to provide expedited production metal stamping services makes filling urgent requests commonplace. This valuable capability is highlighted in the project shown here. One of our long time customers in the power tool industry was in urgent need for the fabrication of a large quantity of progressive die stamped parts to keep their assembly line moving. The part, a custom actuator switch, was a repeat order; since we proactively maintained the original tooling in ready-to use condition, we were able to provide the production capacity to meet their needs.
View Complete Details
Ask Latest Price & Details
Stainless Steel Stamped Custom Channel

Stainless Steel Stamped Custom Channel

  • Dimensions 0.717” in width, .470” in height
  • thickness 9.88”
  • tolerance ±.005”
The part they required was designed as a custom magazine channel, and would be an important component for one of their power tool lines. At American Industrial, our reputation is built on providing quality, on-time delivery, and a wide range of value added services for customers that put their trust in us. In the project shown here, we provided this and more, which is an example of the precision work we do here on an everyday basis. Being that this was a new part, our production process began with a comprehensive design evaluation. This is a critical factor in ensuring that the die development went smoothly and resulted in a die that was optimized to the design, material to be stamped, and the run size.
View Complete Details
Ask Latest Price & Details
SPRING STEEL STAMPING

SPRING STEEL STAMPING

  • Thickness .093″
  • measured 3.45″ in length, 2.554″ in width
  • tolerances ±0.002″.
Customers from a wide variety of industries count on us every day to engineer, design, and fabricate custom made precision dies that allow us to manufacture some of the most challenging components that require high precision and tight tolerances. This capability was highlighted when a client, who is a manufacturer of construction tooling, approached us with a special shear block that they needed to be created. This was primarily a coining and extruding project which employed die tapping, allowing us to eliminate an entire post forming process that would have slowed down production considerably. Because we specialize in challenging projects such as this, we are equipped with a number of very sophisticated presses and machining systems that allow us to take on virtually any stamping project.
View Complete Details
Ask Latest Price & Details
COLD ROLLED STAMPED BOX

COLD ROLLED STAMPED BOX

  • dimensions 11.75″ in length and 15.75″ in width
  • tolerances ±0.003″
In addition to these harsh conditions and severe duty, many items have an immediate impact on worker safety. This is why it is imperative to have high quality, precision practices available when manufacturing parts for this demanding industry. For this reason, our clients can rest assured that when American Industrial is involved in manufacturing, the end result will always be the highest quality that the design parameters will allow. We are well known in many industries for these capabilities, especially the mining industry. In this project, a manufacturer of mining equipment contracted us to create a briefcase lidbox assembly that was designed as a filter frame. The end products design intent was for it to work as a box filter to protect workers and equipment from fine dust and dirt particles.
View Complete Details
Ask Latest Price & Details
Shallow Draw Golf Ball Stencil

Shallow Draw Golf Ball Stencil

  • thick .024″
  • diameter 3.2″
Our ability to fill the needs of such a vast array of applications is derived from our continual investment in our people and equipment. Our reputation as a world class provider of high quality manufactured parts has grown over the years; word has gotten around, and recently reached a customer in the golfing industry. Anyone who has ever been on a green knows what a tin cup is; if you do, were sure that just by reading this you can hear the ball hitting the bottom of the cup after a nice putt. Like so many of the parts and components that we manufacture, they live in a world that we barely think of unless youre tasked with getting them manufactured, or in this case, a greens keeper. This tin cup project is a perfect example. Our years of work in progressive die stamping have allowed us to develop a tool room that is vast. This resource is of great value for customers who need small amounts of a common geometry. This customer needed a single tin cup for this order, so we went to our tool room database to search for an existing die that would fit the bill. Luckily, we came up with a progressive die set that fit the need exactly.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.