American Pro

United States

American Pro Return Air Suspended AHU is available in two packing models, simple packing and wooden case packing. Suspended Air Handling Unit provides air flow rate from 2, 000m3h to 15, 000m3h (1, 200CFM8800CFM).Panels are double-skin with injection of high density polyurethane. The outer skin is anti-corrosion color- coated steel sheet, the inner skin is galvanized steel sheet. The unit cabinet consists of panels attaching to each other by combining with male and female aluminum alloy cards and sealing strip. tighten with concealed bolts.

Available in coolingheating capacity ranges from 14, 000 BTU and 27, 000 BTU.180 sin wave compressor control, higher efficiency and lower power consumption and noise. High efficient and energy-saving EER&COP reaching European A-class energy label. Anti-rust design, making electronic parts longer service life.

The new streamlined fan design, ring and the built-in throttling part make the noise reduced greatly with strong air supply. Strong circulating air flow to cool or heat every corner of the room and realizes even temperature distribution; by choosing high airflow mode, high ceiling application over 3m creates super comfort. LED display. Small body with Built in Water Pump. Please see current catalog for details. Capacity [KW]: 5.3 16

American Pro Tropical Air Cooled Screw Chiller is a kind of central air-conditioning unit which adopts air as the cooling or (Heating) source and water as the cooling or (heating) medium to cool down or (heat ) the indoor ambient temperature through the indoor terminal(AHUFCU). American Pro air cooled screw chillers are the premium solution for industrial and commercial locations where installation contractors, consultants and building owners require optimal performances and optimized air quality. Air cooled chillers typically have a lower initial investment and maintenance cost than water cooled system because they do not require a cooling tower, condenser water pump, and associated condenser water chemical treatment system.- R134a environmental friendly refrigerant Refrigerant of the HFC R134a group with zero ozone depletion potential. Very low GWP (Global Warming Potential)

American Pro Coolfort Tempo Super Series air-cooled chiller adopts air as the coolingheating source and water as the coolingheating medium to coolingheating the indoor ambient temperatures through the indoor terminals (AHUFCU). It includes air cooled scroll chiller and air cooled screw chiller. The capacity range is from 25kW to 130kW. The chillers can be used in all types of climate; the wide selection of module makes it possible to build a system for any of the customers requirements.

Available in cooling only and coolingheating capacity ranges from 12, 000 BTU to 28, 000 BTU. Highly efficent, eco-friendly, easy to install and simple to maintain, high performing. Ideal for gulf regions, desert, and high ambient temperatures. With the special designed turbulent flow louver, the noise level of the airflow could be effectively reduced. The airflow could be distributed in two directions (up and down) at the same time with the two independent louver holders.

Available in coolingheating capacity ranges from 7, 000 BTU and 18, 000 BTU with ability of combining to reach a range of 7, 000 BTU to 42, 000 BTU. It comes in three designs (84, 87, and 107). High efficiency, R410A, eco-friendly. Ideal for gulf regions, and high ambient temperatures.

DX Air Handlers directly chill air by the refrigerant in the cooling coil of the air handling unit. Due to this heat transfer process is more efficient, since there is no middle agency involved for the heat transfer resulting in higher cooling efficiency. In case of the chilled water system, the cooling effect from the refrigerant is first transferred to the chilled water, which is then used to chill the air used for cooling the room. There is some loss of the cooling effect when it is being transferred from the refrigerant to the chilled water and from there to the air due to which the chilled water systems have lesser cooling efficiency. The chilled water acts as the secondary medium for cooling the room air in air handling unit.

American Pro tropical air-cooled chiller adopts air as the coolingheating source and water as the coolingheating medium to coolingheating the indoor ambient temperatures through the indoor terminals (AHUFCU). It includes air cooled scroll chiller and air cooled screw chiller. The capacity range is from 25kW to 1200kW for one unit. The max capacity output is up to 2000kW for combined air cooled scroll chiller. The chillers can be used in all types of climate;the wide selection of module makes it possible to build a system for any of the customers requirements.The freely configurable five-module design simplifies installation and features a DIP switch that enables any module to be selected as the master unit. The modular design facilitates easy expansion in stages to resopond to additional cooling requirements. This solution provides excellent partial load facility. significant cost-savings, and easy transportation and installation. As distributors stock all modules, rapid delivery is guaranteed.