Post Your Requirement Menu

Welcome User

Other Products / Services

Leading Manufacturer, Supplier & Retailer of Clevis Sling Hooks, self sling hooks, Anchorage, LEG Sling ropes and Vertical Lifelines.

Clevis Sling Hooks

  • Weight 6.6 lbs.

Master Item # 5746815 Weight 6.6 lbs. Dimension (D) 2.0 in. Products Alloy Hooks Working Load Limit 15, 000 lbs. Alloy Grade 100 Chain Size 12`` Dimension (E) .625 in. Dimension (T) 1.875 in. Dimension (W) 1.375 in. Dimension (OAW) 6.0 in. Dimension (A) .5625 in. Dimension (HP) 3.0 in.

View Complete Details

self sling hooks

  • Weight 5747015

Master Item # 5747015 Weight 10.5 lbs. Dimension (D) 2.375 in. Products Alloy Hooks Working Load Limit 22, 600 lbs. Alloy Grade 100 Chain Size 58`` Dimension (E) .75 in. Dimension (T) 2.375 in. Dimension (W) 1.50 in. Dimension (OAW) 6.56 in. Dimension (A) .71 in Dimension (HP) 3.0 in.

View Complete Details

Anchorage

  • Length when flat 25 inches - Weight = 4.4 lbs.

One of the fundamental parts of any Fall Protection system is the anchorage points. Depending on the type of situation, the anchorage point can vary tremendously. Anchorage connectors can also vary depending on the type of job, type of installation, type of industry and type of structure. The anchorage system provides a means of attaching the system to the anchorage point and must be able to withstand more than a ton of force generated from a fall.RemovableReusable 14`` thick steel roof anchor Complete with zinc plated forged alloy steel O-ring Nail (twelve 16d {penny}) or bolt (six 14``x2-12`` or longer lag screws) into the sheathing and joist, rafter, etc. (roof member) Designed to be removable, it may be used again after an inspection 5, 000 lb. Minimum breaking stregth Length when flat = 25 inches - Weight = 4.4 lbs. Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359

View Complete Details

LEG Sling ropes

  • Wire Classification 6 x 19 IWRC

Fittings Thimble, Hoist Hook Master Item # AS 140-TTH- 050 Maximum Operating Temperature 400 Minimum Operating Temperature -60 Number of Legs Four Rope Diameter 12 Sling Material Independent Wire Rope Core Splice Mechanical Splice Length Wire Classification 6 x 19 IWRC Rated Capacity at 30 degrees (US tons) 4.4 Rated Capacity at 45 degrees (US tons) 6.2 Rated Capacity at 60 degrees (US tons) 7.6

View Complete Details

Vertical Lifelines

Revolutionary design is less sensitive to rope variations - it works on worn rope with no nuisance lock-ups Mobile type, automatically follows worker providing maximum freedom of movement Utilizes both inertia and cam locking system for added safety - preventing ``panic-grab`` situations Energy absorbing design reduces the forces generated upon a worker in the even of a fall Attach or detach anywhere along the lifeline for added versatility Corrosion resistant stainless steel and thermoplastic construction Fits 58`` diameter rope lifeline Use with 3 ft. EZ Stop® II shock absorbing lanyard (part#1220007) Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z 359 This DBISALA rope grab automatically follow you, giving you greater feedom of movement and virtually hands-free operation. They can be installed or removed at any point on the lifeline. The rope grab utilizes a cam lever as well as a friction sensitive brake to lock the rope grab onto the lifeline in case of a fall, even if the operator holds the device open in a panic situation.

View Complete Details

Two-Leg Wire Rope Slings

  • Length 6 x 19 IWRC

Fittings Thimble, Hoist Hook Master Item # AS 120-TTH- 043 Maximum Operating Temperature 400 Minimum Operating Temperature -60 Number of Legs Two Rope Diameter 716`` Sling Material Independent Wire Rope Core Splice Mechanical Splice Length Wire Classification 6 x 19 IWRC Alloy Oblong Link (D) 34 Alloy Oblong Link (L) 5 12 Alloy Oblong Link (W) 2 34 Rated Capacity at 30 degrees (US tons) 1.9 Rated Capacity at 45 degrees (US tons) 2.7 Rated Capacity at 60 degrees (US tons) 3.4

View Complete Details

Electric Hoist

  • Wt. (lbs) 128

featuring Harrington`s SNER Electric Chain Hoist. The Harrington SNER electric chain hoist is built for extreme duty applications that require single phase power. A hoist with a 60 minute, H4 duty rated motor is revolutionary and unmatched in a single phase offering. Maintenance friendly features include a unique chain guide, hinged control panel, sealed housing and durable load sheave. For beam travel requirements couple with SMR motorized, PT manual push and GT manual geared trolleys.

View Complete Details

trolley hoist

  • Net Weight3 (lbs) 166

featuring Harrington’s SHB Trolley Hoist. Harrington’s SHB ultra low trolley hoist offers premium quality and durability in a low profile package. This industrial grade hand chain hoist and geared trolley configuration minimizes beam-to-hook distance making it ideal for applications where longer hook travel is required. Available in capacities of 1 – 10 Ton.

View Complete Details

three legs ropes sling

  • Length 6 x 19 IWRC

Fittings Thimble, Hoist Hook Master Item # AS 130-TTH- 062 Maximum Operating Temperature 400 Minimum Operating Temperature -60 Number of Legs Three Rope Diameter 58 Sling Material Independent Wire Rope Core Splice Mechanical Splice Length Wire Classification 6 x 19 IWRC Rated Capacity at 60 degrees (US tons) 8.8 Rated Capacity at 45 degrees (US tons) 7.2 Rated Capacity at 30 degrees (US tons) 5.1

View Complete Details

Self Retracting Lifelines

  • series 3101240:

Replace your lanyard to reduce fall distance and improve your safety program with the Nano-Lok™ Self Retracting Lifeline. Nano-Lok™ is ergonomically designed for ease-of-use and is ideal for direct connection to most harnesses. The unique single or twin SRL quick connector designs leave the dorsal D-ring available for other uses and provides a snug fit  its virtually unnoticeable on your back!

View Complete Details

S Hooks

  • Weight 2.30 lbs.

Master Item # SHA0750 Weight 2.30 lbs. Dimension (D) 1.13 in. Products Alloy Hooks Working Load Limit 1750 lbs. Alloy Grade Alloy Dimension (A) .75 in. Dimension (B) 8.25 in. Dimension (C) 2.25 in. Size 34``

View Complete Details

Eye Wire rope Sling

Fittings Standard Eye, Sliding Choker Hook Master Item # AS 110-EED- 062 Maximum Operating Temperature 400 Minimum Operating Temperature -60 Number of Legs Single Rope Diameter 58`` Sling Material Independent Wire Rope Core Splice Mechanical Splice Length Wire Classification 6 x 19 IWRC Choker Rated Capacity 2.5 Eye Dimension (A) 5 Eye Dimension (B) 10

View Complete Details

Air Hoist

  • Wt. (lbs) 15

featuring Harrington’s TCR Series Air Hoists. The Harrington TCR series air hoists offer the benefit of lifting heavier loads while maintaining low headroom and a continuous duty cycle. These hoists are best suited for use in foundries, assembly lines, construction sites and many other demanding applications.

View Complete Details

Fall Protection

Fall Protection encompasses much more than just tying off to ensure OSHA compliance. It entails what is commonly referred to as the ABC’s of Fall Protection. Anchorage: One of the fundamental parts of any Fall Protection system is the anchorage points. Depending on the type of situation, the anchorage point can vary tremendously. Anchorage connectors can also vary depending on the type of job, type of installation, type of industry and type of structure. The anchorage system provides a means of attaching the system to the anchorage point and must be able to withstand more than a ton of force generated from a fall. Body Support: The full-body harness provides the necessary support and will distribute fall force over the upper thighs, pelvis, chest and shoulders. They are also used as a connection point on the worker as part of a complete personal fall protection system. Connectors: There are different kinds of connectors based on the overall fall protection plan with the two most common being a fall arrest system and the fall restraint system. In a personal fall arrest system, a shock-absorbing lanyard helps to limit fall forces to less than 1, 800 lbs. and most will limit forces to below 900 lbs. In a fall restraint system, a connector that is short enough so that the worker cannot reach a fall hazard is used.

View Complete Details

lever hoist

  • Wt. (lbs) 13

featuring Harrington’s LB Lever Hoist. The Harrington LB Series lever chain hoist features a low headroom, compact design that is perfect for working in tight quarters. Regarded as the best lever hoist in the industry, the LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. We have a wide range of sizes available in stock for immediate shipment.

View Complete Details

SINGLE LEG EYE

Single Leg Eye & Eye Wire rope Sling. Fabricated with 6 X 19 Class, EIP Grade Wire Rope with Independent Wire Rope Core. Master Item # AS110-EE-043-MS Rope Diameter 716 Vertical Capacity Tons 1.9 Choker Capacity Tons 1.4 Basket Capacity Tons 3.9

View Complete Details

plate hooks

  • Weight 13.0 lbs.

Master Item # PHA050 Weight 13.0 lbs. Dimension (D) 1.50 in. Products Alloy Hooks Dimension (L) 1.50 in. Working Load Limit 13, 000 lbs. Dimension (M) 7.37 in. Alloy Grade Alloy Chain Size 12`` Dimension (R) .50 in. Dimension (T) 1.0 in. Dimension (W) 3.5 in. Dimension (A) 3.5 in. Dimension (B) 4.0 in. Dimension (C) 4.38 in. Size 12`` Dimension (N) .25 i

View Complete Details

foundry hooks

  • Weight 6.7 lbs.

Master Item # 5664815 Weight 6.7 lbs. Dimension (D) 1.81 in. Products Alloy Hooks Dimension (H) 2.25 in. Working Load Limit 15, 000 lbs. Alloy Grade 100 Chain Size 12`` Dimension (R) 6.87 in. Dimension (T) 3.5 in. Dimension (W) 1.50 in. Dimension (Ed) 1.00 in. Dimension (Es) .75 in.

View Complete Details

RATCHED Load Binder

  • Weight 14.7 lbs.

Lebus L140 R-A Standard Ratchet Load Binder 38``-12`` Working Load Limit (US Lbs.) 15000 Item Name Lebus L140 R-A Standard Ratchet Load Binder 38``-12`` Weight 14.7 lbs.

View Complete Details

Mechanical Splice

Master Item # GRMS-050 Maximum Operating Temperature 400 Minimum Operating Temperature -60 Products Grommets Choker Rated Capacity 2.5 Vertical Rated Capacity 3.6 Basket Hitch Rated Capacity 7.2 Basket Hitch Rated Capacity 600 6.2 Basket Hitch Rated Capacity 450 5.1 Basket Hitch Rated Capacity 300 3.6 Grommet Body Diameter 12

View Complete Details

HAND TIUCKED

Master Item # GRHT-056 Maximum Operating Temperature 400 Minimum Operating Temperature -60 Products Grommets Choker Rated Capacity 2.9 Vertical Rated Capacity 4.2 Basket Hitch Rated Capacity 8.4 Basket Hitch Rated Capacity 600 7.3 Basket Hitch Rated Capacity 450 6 Basket Hitch Rated Capacity 300 4.2 Grommet Body Diameter 916

View Complete Details

American Rigger`s Supply

  • Weight 790

American Rigger`s Supply offers a complete line of lifting and spreader beams. Custom design is available to meet your specific requirements. We Stock an assortment of the Caldwell model 16 adjustable lifting beams in 14 ton to 5 ton capacities.

View Complete Details

gauge wire

  • Mesh Weight 3.9
  • series 10

Master Item # WMS-1-6-10 Type 1 Gauge 10 Nominal Mesh Width 6 Vertical Rated Capacity 7200 Choker Rated Capacity 7200 Basket Hitch Rated Capacity 14400 Terminal Dimension (D) 3 12 Terminal Dimension (IL) 4 12 Terminal Dimension (TL) 5 58 Terminal Dimension (CL) 7 34 Terminal Thickness 12 Approx. Weight (3 ft. Type 1 Slings) 14 Mesh Weight 3.9 Products LiftAll Roughneck Mesh Slings

View Complete Details

gauge wire

  • series 12

Master Item # WMS-1-4-12 Type 1 Gauge 12 Nominal Mesh Width 4 Vertical Rated Capacity 3200 Choker Rated Capacity 3200 Basket Hitch Rated Capacity 6400 Terminal Dimension (D) 3 Terminal Dimension (IL) 4 Terminal Dimension (TL) 5 Terminal Dimension (CL) 6 34 Terminal Thickness 12 Approx. Weight (3 ft. Type 1 Slings) 9 Mesh Weight 2.3 Products LiftAll Roughneck Mesh Slings

View Complete Details

Exceptional stability wire rope

  • Strength Flex-X 19

Flex-X 19, a Category 2 rotation resistant rope, is made from 19 strands. Six strands are laid around a core strand in one direction, and then 12 strands are laid around this first operation in the opposite direction. Because of its tightly compacted smooth design, Flex-X 19 offers more crushing resistance than standard 19 x 7 rope, higher strength- to-diameter, resistance to bending fatigue, exceptional stability, reduced wear to sheaves and drums, and improved handling, operating and spooling characteristics. Flex-X 19 has also demonstrated greater fatigue resistance to substantially cut rope expense and extend service life. It’s ideal for multipart hoist lines wherever you encounter spooling problems, drum crushing, block twisting or have fast line speeds.

View Complete Details

Keep lubrication inside

  • series 7-Flex PFV
  • Weight (lb/ft) 0.27

Combining the advantages of PFV, a high-grade thermoplastic material, extruded into a 7-Flex lubricated wire rope, provides additional advantages over non PFV ropes. Through our process, the finished rope has the strand valleys between strands and interstices equally filled with plastic, which seals the lubricant and assures a balanced rope when finished. This also has proven in many applications to give you longer service life and cleaner operation than conventional wire ropes. On the inside, you’ll find our 7-Flex wire rope that withstands the tough pressures of your demanding jobs while the PFV cushions the strands, distributes internal stresses, keeps in wire rope lubricant and keeps out dirt and debris. PFV also helps shed water and dirt, giving you a clean, smooth surface to make it easy to pass over sheaves and onto drums. This smooth surface works to clean and polish as it extends the service life of your sheaves and drums, while also reducing your cleanup requirements and your maintenance costs. PFV doesn’t melt or soften from the heat of normal operating temperatures. It’s also virtually unaffected by sunlight and cold weather. The result is longer service life from your wire rope. It’s a Union wire rope, Tested, Tough & True.

View Complete Details

compacted strand wire rope

  • Weight (lb/ft) 0.90

Flex-X 9 features compacted strands and swaging for extra drum crushing resistance and increased stability. Its high density strands deliver extra strength and resistance to abrasion. Flex-X 9 is manufactured with a dual compaction process to produce a compact cross-section with minimum voids and greater surface area on outer wires that contact drums, sheaves and the rope, itself during operation. The high-density compacted strands minimize nicking at strand-to-strand contact points. Flex-X 9 was specifically designed for boom hoist applications and tubing line applications where drum crushing is a challenge.Weight (lbft)

View Complete Details

WIRE CROrotation resistant rope

  • Weight (lb/ft) 0.064

In an application where a single-part hoist rope is used to lift a free load – or where rotation-resistant properties are essential for rope performance – the 19x7 can be used. Its rotation-resistant characteristic is achieved by laying six strands around a core strand in one direction, then laying 12 strands around the first operation in the opposite direction. When the rope is in tension, opposing rotational forces are created between the inner and outer layers. Frequent and regular inspection for broken wires is critical when using rotation resistant rope.

View Complete Details

Abrasion resistant wire rope

  • Weight (lb/ft) 0.116

The 6x19 classification of wire ropes includes standard 6 strand, round strand ropes with 16 through 26 wires per strand. This is a good rope to withstand abrasion or crushing on the drum. Ropes with independent wire rope strands and a core (IWRC) in general, are more crush resistant than fiber core ropes. When you purchase Union’s 6x19 Class of wire ropes, you get more than just another rope. Manufactured in an ISO 9001 certified factory and backed by the industry’s largest staff of professional engineers, we do more than meet published specifications. Our quality begins with our raw material qualification process. All of our suppliers must meet rod standards that are more stringent than industry standards. We then track the rod coils though the manufacturing process for full traceability. And we don’t stop there; the tracking continues into the field as each schedule is tracked to the customer. In addition to tracking, throughout the manufacturing process we break test wires and tie that information to the coil andor reel of rope. Through these actions, we know the characteristics of the rope from its infancy and know who purchased it when it was completed. This peace of mind is what you should expect from the leader.

View Complete Details

Fatigue resistance wire rope

  • Weight (lb/ft) 0.116

The 6x26 WS has better resistance to abrasion than a 6x25FW. It features a compact construction with solid support for the wires; therefore it has a high resistance to crushing. Its number and relative size of the inner wires add to the stability of the strand and gives it a fatigue resistance comparable to a 6x25 FW. A standard 6X26 WS construction provides the best rope for a wide range of applications. In general, we recommend the use of the 6x26WS in any application where a 6x25FW is used.

View Complete Details

Abrasion Resistant

  • Weight (lb/ft) V0.116

The 6x36 classification of wire ropes includes standard 6 strand, round strand ropes with 27 through 49 wires per strand. The 6x36 ropes are important for their fatigue resistance. This fatigue resistance is made possible by the greater number of small wires per strand. Although there are exceptions for special applications, the constructions in 6x36 classification are primarily designed to be the most efficient for each rope diameter. As the rope size increases, for instance, a large number of wires can be used to achieve required fatigue resistance, and still those wires will be large enough to offer adequate resistance to abrasion. Characteristics of Standard 6 x 36 Cla

View Complete Details

general purpose ropes

  • Weight (lb/ft) .116

Good resistance to wear and fatigue are required for trip ropes on mining shovels. 7-Flex and 7-Flex PFV have the best characteristics to maximize rope service life in this application. The 7-Flex construction offers improved resistance to bending fatigue and the PFV plastic-impregnated feature further enhances service life and make the operation cleaner. Weight (lbft)

View Complete Details

Crush resistance wire rope

  • Weight (lb/ft) 0.18

When you purchase Union’s 8x19 Class of wire ropes, you get more than what meets the eye. Built in an ISO 9001 certified factory and backed by the industry’s largest staff of professional engineers, we do more than produce to spec. Our quality begins with our raw material qualification process which suppliers must meet standards that are more stringent than industry. We then document rod coils though completion rope manufacturing for full traceably. We don’t stop there; the traceability continues into the field as each schedule is tracked to the customer. Throughout the manufacturing process we break test wires and tie that information to the coil andor reel of rope. Thus ensuring we know the characteristics of the rope from its infancy and know it meets or exceeds our published strengths. Standard constructions are regular lay and either 19 Seale or 25 Filler Wire. The size relationship between strands and cores gives these ropes increased bendability over six strand ropes of the same diameter. The 8x19 has more crushing resistance and a higher minimum breaking force than 19x7, but less rotation resistance. An 8x19 class rope can be used in multi-part reeving where limited rotation resistance is required. You can trust Union wire rope to be produced to a higher standard, consistently. For the rope characteristics, please refer to the chart below.Weight (lbft) Minimum Breaking Force (tons of 2000 lbs 516

View Complete Details

Rotation resistance wire rope

  • Weight (lb/ft) 0.18

The size relationship between strands and cores gives these ropes increased bendability over six strand ropes of the same diameter. 8x25 has more fatigue resistance than an 8x19 rope.

View Complete Details

flattened strand wire rope

  • Weight (lb/ft) 0.74

Also called triangular strand, flattened strand ropes perform exceptionally well on certain installations, especially those involving heavy loads where the speed of operation is slow, where adequate diameter sheaves and drums are used, or where a crush resistant rope is required. Their distinguishing physical feature is their relatively flat exposed surfaces of strands. As a result, the rope exterior is more nearly a smooth, continuous circle than that of regular round strand wire rope. Flattened strand ropes are made with two layers of 12 wires around a triangular-shaped center. We offer a 6x30 Style G using a six-wire center as the standard construction.

View Complete Details

Crush resistant wire rope

  • Weight (lb/ft) 0.85

The latest high performance rotation-resistant rope designed and manufactured by CASAR Germany, a member of WireCo WorldGroup. Starlift Xtra™, the new high performance rotation resistant rope, replaces Union`s Flex-X 35 product line, and meets the highest Minimum Breaking Forces requested in the crane rope market. Starlift Xtra provides the user unique characteristics as a hoist rope. The following information outlines the crucial operating characteristics and discusses why Starlift Xtra is the rope of choice in many applications. Strength Starlift Xtra is the strongest of all ropes in the high performance rotation-resistant product line. The following chart shows the superior values of Starlift Xtra.

View Complete Details

Crane Rope

  • Weight (lb/ft) 0.50

lex-X 7 CC - a crane rope that guarantees a lift in productivity. Flex-X 7 CC extended duty crane and hoist rope is designed and manufactured primarily for the container crane industry where repetitive, continuous operations is required. Since its debut, additional research and extensive testing have shown that Flex-X 7 CC delivers the same exceptional fatigue resistance and service life to other applications where bending fatigue is a problem. Already a preferred rope for container cranes, Flex-X 7 CC is now providing extended service life in carriage operations and other applications where multi-sheave equipment and rigorous duty cycles induce fatigue stresses. Almost any application currently using a 6x36 construction can gain an increase in service life with Flex-X 7 CC.Weight (lbft)

View Complete Details

Less sheave wire rope

  • Weight (lb/ft) 0.32

Flex-X 6 users receive superior performance and increased service life in many applications compared to the ropes they had previously employed. When compared to conventional six strand ropes, Flex-X 6 ropes provide greater surface area and more steel per given diameter. This increases rope stability and strength. This results in a longer service life and less sheave and drum wear. Flex-X® vs. standard rope of similar construction: Flex-X designs reduce drum scrubbing between the lead line and the previous wrap. The smooth contact creates less interference, less metal loss and wire deformation. The increased surface area of Flex-X can be seen in the comparison of the contact points of a standard 6x26WS and Flex-X as shown.Weight (lbft)

View Complete Details

WINCH BAAR

Winch Bar with knurled non-slip handle and a tapered, carbon-steel nose piece for strength Item Name Winch Bar with knurled non-slip handle and a tapered, carbon-steel nose piece for strength

View Complete Details

Lanyards

Meets or exceeds all applicable industry standards including OSHA and ANSI Our rope lanyards are ideal for restraint or positioning applications, for fall arrest check out our EZ STOP. or ShockWave shock absorbing lanyards. Every DBI-SALA lanyard combines super strength and ease of use without sacrificing safety. All lanyard hardware is proof tested to meet or exceed industry standards before you even get it. Standard on all DBI-SALA lanyards are our patented, user-friendly self locking snap hooks. They allow you to open and close the hook even with gloves on without getting your thumb or fingers in the way, they`re industry prefered!

View Complete Details

harness accessories

Suspension Trauma Safety Strap helps prevent the effects of suspension trauma after a fall Allows worker who is suspended to stand up in their harness to relieve pressure A safety accessory that can be attached to most harness brandsstyles right in the field Installation to your harness is fast and efficient - just choke off to strap and it`s ready Extremely compact and lightweight design stays out of the worker`s way Deployment and operation is fool-proof, simply unzip, and hook straps together Continuous loop design allows for either one or two-foot suspension relief without pinching

View Complete Details

PROOF COIL

  • Weight/ft. (US Lbs.) 0.56

American Rigger’s Supply offers a complete line of chain and chain fittings, all types and grades... representing - Campbell, Gunnebo, Pewag, Crosby, CM, Peerless, Acco and others. Like most of the products we sell, choosing the right chain for your application often times requires knowledge and experience. Our customer service staff stands ready to assist you with making the right choice regarding size and grade. We primarily stock welded chain but whatever your application requires, please allow American Rigger’s Supply to be your source for a quality product. The National Association of Chain Manufacturers (NACM) welded chain standard, RR-C-271 F lists chain by Type and Class.

View Complete Details

Lever

  • Weight 12.47 lbs.

Lebus L150 A-1 Standard Lever Type Load Binder 38``-12`` Working Load Limit (US Lbs.) 9200 Item Name Lebus L150 A-1 Standard Lever Type Load Binder 38``-12`` Weight 12.47 lbs.

View Complete Details

Push Trolley

  • Min Radius for curve (in) 25.6

Cap. (Tons) 3 Wt. (lbs) 46 Min Radius for curve (in) 25.6 Std flange range (in) 3.23  6.0225.6Cap. (Tons) 3 Wt. (lbs) 46 Min Radius for curve (in) 25.6 Std flange range (in)

View Complete Details

eye sling hooks

  • Weight 5647015

Master Item # 5647015 Weight 10.00 lbs. Dimension (D) 2.42 in. Products Alloy Hooks Dimension (H) 2.62 in. Working Load Limit 22, 600 lbs. Alloy Grade 100 Chain Size 58`` Dimension (R) 7.47 in. Dimension (T) 2.34 in. Dimension (OAW) 6.67 in. Dimension (Ed) 1.31 in. Dimension (Es) .875 in. Dimesion (OAL) 10.47 in.

View Complete Details

Eye Grab Hooks

  • Weight 1.39 lbs.

Master Item # 559737 Weight 1.39 lbs. Dimension (D) 2.78 in. Dimension (G) 4.81 in. Products Alloy Hooks Dimension (H) .50 in. Dimension (L) .78 in. Working Load Limit 8800 lbs. Dimension (K) 1.49 in. Dimension (M) 3.28 in. Alloy Grade 100 Chain Size 38`` Dimension (P) 1.04 in. Dimension (E) .47 in. Dimension (B) 1.78 in. Dimension (I) 1.27 in.

View Complete Details

Structural Wire Rope Assemblies

The customer can choose from a wide variety wire ropes and fittings to fit your particular application. Standard Wire Ropes 7x 19 galvanized 7 x 19 stainless steel 6 x 19 bright or galvanized 6 x 36 bright or galvanized (Alternate wire rope constructions and special coatings are available.) Depending on your application, most assemblies can be fabricated using standard fittings. Swage Fittings Swage Button Ferrules Standard Threaded Studs Large Shank Threaded Studs Open Swage Sockets Closed Swage Sockets Threaded Sleeves Fork Terminals Pin Eye Terminals Large Ring Eyes Marine Eyes Shank Hooks

View Complete Details

Clevis Grab Hooks

  • Weight 659728

Master Item # 659728 Weight 2.1 lbs. Dimension (D) 3.32 in. Dimension (G) 5.27 in. Products Alloy Hooks Dimension (H) .65 in. Dimension (L) .63 in. Working Load Limit 15, 000 lbs. Dimension (K) 1.54 in. Dimension (M) .65 in. Alloy Grade 100 Chain Size 12`` Dimension (P) 1.18 in. Dimension (R) 3.05 in. Dimension (J) 1.24 in.

View Complete Details

UNIVARSAL BEAM

  • Net weight (lbs) 99

Capacity 2 Ton Flange Range (in) 3.00 - 7.50 Max beam flange thickness (in) 0.83 Net weight (lbs) 9

View Complete Details

Portable WICHES

Standard Portable Winch, allows flexibilty of winch placement along the trailer side channel. For use with 3" or 4" webbing. Item Name Standard Portable Winch, allows flexibilty of winch placement along the trailer side channel Working Load Limit (US Lbs.) 5500

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Kansas City, KS 66105 map, United States