Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of handling wet panels, Tackdry Ovens, spray system, Spray Unit and Solder Strippers.

handling wet panels

Argus International spray technology has been proven superior to other methods of LPISM application. Our primary goal was to produce a spray system and a tack dry oven which could be linked through compatible conveyor systems to form a time and labor-efficient unit and to eliminate the handling of wet boards. A single, traversing spray head also increases efficiency by reducing setup time, and decreasing both machine cost and maintenance. HVLP-Heated Gun Technology allows use of high-solids LPISM for increased efficiency and minimized environmental impact. Argus 9724 drying technology provides a major breakthrough in reduction of dry time. Typical convection systems require 35 to 45 minutes to tack dry LPISM coatings; the 3 Zone Tackdry Oven reduces this to 3 or 4 minutes and 5 Zone Final Cure Oven reduces cure time to 6 or 7 minutes.

View Complete Details

Tackdry Ovens

The 9724 IR Tackdry Oven is designed to quickly and efficiently tack-dry LPISM-coated Printed Circuit Boards. The unit consists of three individually controlled long-wave infrared heater zones, a forced-air circulation system, and a conveyor to move the boards through the oven. This highly innovative technology, developed by Argus International, provides a breakthrough in significantly reducing the tack-dry time of LPISM-coated PCBs. While convection-only ovens rely on air to transfer heat, the 9724 directly heats the board with IR radiation and provides forced air circulation. This technique lowers the normal tack-dry time from 35-45 minutes to 3-4 minutes, which represents about a 1200% improvement in drying efficiency!

View Complete Details

spray system

The 9524S (Single-sided) or 9524D (Double-sided) HVLP Spray Units utilize advanced spray technology to apply uniform LPISM coatings to Printed Circuit Boards. This is accomplished by sweeping the heated gun across the PCB at very high speeds as the PCB passes through the spray chamber on a continuously moving edge-contact conveyor. This provides an efficient, reliable system which minimizes over-spray and produces a continuous, conveyorized throughput of LPISM-coated boards. The 9524S deploys one spray gun for spraying a single side of the panels at a time, while the 9524D deploys two spray guns for the single-pass coating of both sides of the panels.

View Complete Details

Spray Unit

  • Size 6" to 24" [150mm to 600mm]

index005007.jpg index004003.jpg index012091.jpg index004003.jpg index013047.jpg Copyright © 1997-2017 Argus International. All rights reserved. Product Details - Photovoltaic Thin Film Spray Coating Line Argus 9524S Single-Sided HVLP Spray Unit Applications include spraying primary resist, cadmium chloride, copper acetate, and several other sprayable chemistries used for solar panel processes. The 9524S can spray solar panels ranging from 6 to 24 inches wide with an optional maximum width of 26.5 inches. Panels of any length are coated precisely, with controlled thickness and uniform coverage. The wide operation window, user-friendly touch screen interface, and simplicity of access for cleaning and maintenance make the Argus 9524S Single-Sided HVLP Spray Unit an excellent choice for Thin Film Coating. Argus International's spray technology has been proven by our customer base to be superior to other methods of spray coating applications. A single traversing spray head enhances efficiency by reducing setup time and machine maintenance. High Viscosity Low Pressure (HVLP) Heated Gun Technology allows use of high-solids for increased efficiency, less material waste, and minimized environmental impact.

View Complete Details

Solder Strippers

The PC6600 Series solder stripping systems were designed to precede Argus HAL5224 Hot Air Leveler systems. The machine is designed to strip plated tin or tin lead printed circuit boards, then passivate the surface for future processing.

View Complete Details

Argus Double Side UV Processor

  • Series PC7700

The PC7100 single sided UV curing systems are designed to expose photoimageable materials to intense UV energy. The UV energy is provided by employing medium pressure mercury vapor lamps above the conveyor. Lamp intensities of 200 watts per inch and 300 watts per inch are available with 2 or 3 lamp arrangements. Lamp energy is application dependent, but the standard equipment includes 2 lamps are 200WPI each. An optional water cooling system is available for exposing products that require a low surface temperature be maintained. The water cooling system supplies an IR filter which consumes IR emissions at the source, thereby reducing effective surface temperatures. The filtration system includes a water jacket type arrangement that provides a wall of water surrounded by two walls of quartz glass. The water is cooled in a self contained cooling system and recirculated in a closed loop fashion.

View Complete Details

precleaners

The PC5500 Series precleaning systems were designed to precede the Argus HAL5000 Series Hot Air Solder Leveling systems. The machine is designed to provide a vigorous spray cleaning, fresh water rinse and turbo air dry.

View Complete Details

fusers

The PC4700 and PC4800 Series fusing systems were designed to reflow double sided and low mass multilayer circuit boards. The system consists of one temperature-controlled long-wave IR emitting zone for a saturating preheat (this feature on PC4800 system only), and one short-wave IR emitting zone with independent upperlower lamp control. This patented fusing technique provides a wider process window than all lamp systems. The preheat and reflow zone emitters are selected specifically for preheat and reflow purposes, respectively.

View Complete Details

Argus Single Side UV Processor

  • Series PC7100

The PC7100 single sided UV curing systems are designed to expose photoimageable materials to intense UV energy. The UV energy is provided by employing medium pressure mercury vapor lamps above the conveyor. Lamp intensities of 200 watts per inch and 300 watts per inch are available with 2 or 3 lamp arrangements. Lamp energy is application dependent, but the standard equipment includes 2 lamps are 200WPI each. An optional water cooling system is available for exposing products that require a low surface temperature be maintained. The water cooling system supplies an IR filter which consumes IR emissions at the source, thereby reducing effective surface temperatures. The filtration system includes a water jacket type arrangement that provides a wall of water surrounded by two walls of quartz glass. The water is cooled in a self contained cooling system and recirculated in a closed loop fashion.

View Complete Details

Hot Air Leveler

The HAL5224 Hot Air Solder Leveling System is designed to provide the highest quality solder leveling at high throughput rates while preserving the highest reliability and serviceability standards available. Argus International has been designing, building and operating HASL systems for over a decade. The experience earned in a decade of dedication to engineering the HASL process is evident by the high quality work produced.

View Complete Details

Single Roller Coating Heating

The PC3400 Series flux application systems are designed to support the Argus HAL5224 Hot Air Solder Leveling system by applying flux to circuit boards prior to the HASL process. The PC3400 employs one set of nappy type rollers to provide complete flux coverage. The top roller applies flux to the entire board surface. The bottom roller forces flux into the barrels providing complete surface coverage. Excess flux is filtered and recycled proving a significant cost savings.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Ringoes, NJ 08551 map, United States