Post Buy Requirement
AP
United States
Add Review

Other Products / Services

CLEAR ADVANTAGE

  • Model Number CA-20-2
  • Pipe Size 1/2"
  • Max. Flow SCF 30 scfm
  • Max. Pressure 120 psi
ARROW PNEUMATICS CA 20-2 CLEAR ADVANTAGE FEATURES
Designed for the Customer who needs Water Free, Oil Free, Clean and Dry Air including Waterborne Paint.
The CA 20-2 is recommended to be used with a refrigerated dryer and great for light duty usage in shops where low volume is used small shops, hobbyist, customize shops, instrumentation, wood working

Advantages
Allows you to visually see all filtration and drying steps!
One piece disposablereplaceable cartridge No More pouring beads into a bowl or canister simply
remove one piece cartridge and replace with new one once all the beads turn from blue to pink it is
time to replace cartridge.
Activated Charcoal - Eliminates the need for a OIL Removing filter.
View Complete Details

ARROW PNEUMATIC IN-LINE DESICCANT DRYERS

  • Model No. D12-04
  • NPT 1/2"
  • SCFM 15
  • Desiccant Charge 1Quart
ABOUT ARROW PNEUMATICS D12-04 IN-LINE DESICCANT DRYER
Easy Fill Bowls
Air filtration rod is connected to the bottom of the bowl simply unscrew bowl. Fill bowl with desiccant and
easily screw collar back in place.

1 quart, 12" desiccant filter lowers the dewpoint to -40 degrees removes all water in vapor and liquid form.
When the beads turn from blue to pink, it is time to change the beads. This unit is a must for all paint shops.
Unit comes with 1 quart of desiccant beads.
View Complete Details

ELECTRIC DRAINS-STRAINER INCLUDED

  • Model Number 5802S
  • Voltage 115v
  • Pressure 230
  • NPT 1/4"
  • temp 40° -140°
5802S ELECTRIC DRAIN FEATURES
UL and CE approved Includes protective caps and O-rings for added protection and tamper resistance
IP 65NEMA 4 Protection
Interval Time .05 - 45 Min. Adjustable
Discharge Time .05 - 10 Seconds Adjustable
Manual Override
LED Power Indicator
Forged Brass Valve body
6 ft. Power Cord
1 Year Warranty
2.5 gpm discharge rate
View Complete Details

MINI REGULATORS

  • Model Number R161G Mini Unit w/Metal Body
  • Pipe Size 1/8"
  • Max.Flow SCFM 25
  • Adjustment Type Adjustable Knob Included
  • Pressure Gauge Included
R161G MINI REGULATOR FEATURES
Micro seat finish to ensure no reduced pressure creep
Diaphragm operation
Relieving style standard
Three position non-rising adjustment knob; push to lock, pull to adjust, detach to make tamper resistant
Easily panel mounted
Tamper-proof cap included
Lightweight
View Complete Details

Standard Regulators

  • Model Number R352G
  • Pipe Size 1/4"
  • Max.Flow SCFM 50
  • Adjustment Type Adjustable Knob
  • Pressure Gauge Included
R352G STANDARD REGULATOR, 14" 50 SCFM (GAUGE INCLUDED) FEATURES
Micro finished brass seat to ensure no reduced pressure creep
Reinforced diaphragm for repeated accuracy
Minimal pressure drop due to efficient aspiration
Three position non-rising adjustment knob; push to lock, pull to adjust, detach to make tamper resistant
Relieving style standard
Easily panel mounted
Tamper-proof cap included
In-Line or modular installation
High scfm flow due to efficient aspiration
View Complete Details

MIDFLOW REGULATORS

  • Model Number R376G
  • Pipe Size 3/4"
  • Max.Flow SCFM 220
  • Adjustment Type Adjustable Knob
  • Pressure Gauge Included
R376G MIDFLOW REGULATOR, 34" 220 SCFM (GAUGE INCLUDED) FEATURES
Micro finished brass seat to ensure no reduced pressure creep
Micro finished brass seat to ensure no reduced pressure creep
Reinforced diaphragm for repeated accuracy
Minimal pressure drop due to efficient aspiration
Three position non-rising adjustment knob; push to lock, pull to adjust, detach to make tamper resistant
Relieving style standard
Easily panel mounted
Tamper-proof cap included
High scfm flow due to efficient aspiration
View Complete Details

MINI LUBRICATORS

  • Model Number L181
  • Pipe Size 1/8"
  • Max.Flow SCFM 16
  • Bowl Capacity 1 oz.
  • Bowl Type Poly Bowl w/ No Bowl Guard
L181 MINI LUBRICATOR FEATURES
The miniature fog lubricators are designed for low flow applications where space is limted.
1 oz. polycarbonate bow
Optional metal bowl
Visible drip rate
Easy to refill
Fine adjustment screw
Requires only .1 cfm of air flow to operate
Automatically adjusts oil mist delivery with air flow variations
View Complete Details

STANDARD ARROWFOG LUBRICATORS

  • Model Number L352
  • Pipe Size 1/4"
  • Max.Flow SCFM 16
  • Bowl Capacity 5 oz.
  • Bowl Type Poly Bowl w/ Bowl Guard
L352 ARROWFOG LUBRICATOR FEATURES
Aluminum Housing
Oil delivery at low air flow approximately 2 SCFM
Lubricator may be filled without shutting down air line
3-position non-rising adjustment knob; push to lock, pull to adjust, detach for tamper resistant
View Complete Details

STANDARD ULTRAFOG LUBRICATORS

  • Model Number L452
  • Pipe Size 1/4"
  • Max.Flow SCFM 16
L452 ULTRAFOG LUBRICATOR FEATURES
Aluminum Housing
Oil delivery at low air flow approximately 2 SCFM
Lubricator may be filled without shutting down air line
3-position non-rising adjustment knob; push to lock, pull to adjust, detach for tamper resistant
View Complete Details

MIDFLOW ARROWFOG LUBRICATORS

  • Model Number L374W
  • Pipe Size 1/2"
  • Max.Flow SCFM 142
L374W MIDFLOW LUBRICATOR FEATURES
Oil delivery at low air flow approximately 2 SCFM
Lubricator may be filled without shutting down air line
3-position non-rising adjustment knob; push to lock, pull to ajust, detach for tamper resistant
View Complete Details

MIDFLOW ULTRAFOG LUBRICATORS

  • Model Number L474W
  • Pipe Size 1/2"
  • Max.Flow SCFM 142
L474W MIDFLOW LUBRICATOR FEATURES
Aluminum Housing
Oil delivery at low air flow approximately 2 SCFM
Lubricator may be filled without shutting down air line
3-position non-rising adjustment knob; push to lock, pull to ajust, detach for tamper resistant
View Complete Details

ARROWICK LUBRICATORS

  • Model Number 4106
  • Pipe Size 3/4"
  • Max.Flow SCFM 175
4106 ARROWICK LUBRICATOR FEATURES
Simple, trouble free design. It cannot be over-filled, and has greater bowl capacity which extends interval between filling
Can be used downstream of 4 way valves because it accommodates reverse flow
Bowl fills all the way to the top
It can be filled under pressure no need to shut down air
Tamper-proof internal adjustment
Porous bronze oil metering diffuser introduces smallest possible oil particles to the air
No small orifices to clog and stop oil delivery
Automatically maintains air-oil ratio regardless of variations in air flow
View Complete Details

MINI FRL

  • Model Number 7682 Filter/Regulator/Lubricator
  • Pipe Size 1/4"
  • Max.Flow SCFM 16
7682 MINI FRL FEATURES
FilterRegulatorLubricator
Poly Bowl
Combination Number - 7682
Components - Filter F300-02
Regulator R162G
Lubricator L182
View Complete Details

ECONOMATIC DRAIN

  • Model Number 5702S
  • Pipe Size 1/4"
  • Max.Flow SCFM 16
  • Adjustable Cycle Time 1-60 minutes
ECONOMATIC DRAIN FEATURES
No more crawling under the compressor tank to manually open the tank drain
The drain can be adjusted to open and expel water from 1 to 60 minute intervals and the drain time
(time the drain stays open draining water) can be adjusted from 1 to 30 seconds
Electric drain comes with a Y strainer which protects the drain by trapping any debris
Includes 6 ft. power cord
Includes manual override
View Complete Details

ARROW PNEUMATICS BREATHER VENTS

  • Model Number ASP-1BV
  • Overall Length 7/16"
  • Thread Size 1/8"
ABOUT ARROW PNEUMATICS ASP-1BV BREATHER VENTS
These breather vents have many applications, including vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs. Common uses can be found on single acting cylinders or values to prevent dirt and foreign particles from entering ports open to the atmosphere.

Units have a nickel plated steel insert. All have standard pipe thread fittings for quick assembly and removal for cleaning. The filter element within the standard breather vent is rated for 40 micron filtration and can also be obtained for 20 or 90 micron filtration on special orders.
View Complete Details

ARROW PNEUMATIC DESICCANT REPLACEMENT BEADS

  • Model No. 34189
  • Desiccant Charge 1 Quart – Case of 6 Quarts
1 QUART REPLACEMENT DESICCANT BEAD FEATURES
Replacement Desiccant beads made of silica gel
Visible color change from blue to pink
Lowers dew point to -40 degrees Fahrenheit
Can be recharged
View Complete Details

ARROW PNEUMATIC SUPER QUIET FLOW HEAVY-DUTY METAL PNEUMATIC SILENCER M

  • Overall Length 1 7/8"
  • Model No Overall Length ASQF-1F
  • NPT Female 1/8"
ABOUT ARROW PNEUMATICS ASQF-1F SUPER QUIET FLOW HEAVY-DUTY METAL PNEUMATIC
SILENCER MUFFLER
Units 18" through 12" feature a 50 mesh, self cleaning, stainless steel screen, corrosion-resistant aluminum shell, high flow and minimal back pressure.
View Complete Details

ARROW PNEUMATICS EXHAUST MUFFLERS

  • Model No. ASP-1
  • Thread Size 1/8"
  • Overall Length 1 1/8"
ABOUT ARROW PNEUMATICS ASP-1 EXHAUST MUFFLER
Ouiet Flow mufflerfilters utilize porous sintered bronze directly bonded to nickel plated steel pipe thread
fillings to diffuse air and muffle noise from the exhausted ports or valves, cylinders and air tools. These
units offer a combination of small size with the greatest possible sound deadening qualities to reduce
exhaust noise to acceptable levels within OHSA noise requirements.

In addition, these units are used as filters for gasoline, oil and air. Standard unit contains a 40 micron element.
View Complete Details

ARROW PNEUMATIC SPEED CONTROL MUFFLERS

  • Model No. ASP-1SC
  • NPT 1/8"
  • Max Adj Flow SCFM 20
ABOUT ARROW PNEUMATICS ASP-1SC SPEED CONTROL MUFFLER
Quiet Flow speed control mufflers provide an infinite variation of metering air flow at an acceptable sound
level on exhaust ports of air valves with complete safety.

With linear adjusting ability, the speed of an operating cylinder or air tool may be increased or decreased
with the adjusting screw. The final position is then locked in place by the lock nut. Objectionable exhaust
air noise is eliminated by the surrounding sleeve of sintered bronze.

Complete safety in operation is featured in Quiet Flow speed control mufflers. The sintered bronze sleeve
is held securely in position and protected by an integral shroud. Unit contains a 40 micron element.
View Complete Details

INTERMEDIATE LUBRICATORS

  • Model Number L332W
  • Pipe Size 1/4"
  • Max.Flow SCFM 16
  • Bowl Capacity 4 oz.
  • Length (inches) 2 3/8"
L332W 14" INTERMEDIATE LUBRICATOR FEATURES
4 oz. 14" turn bowl for easy removal, units comes standard with sight glass
Oil delievery at low air flow approximately 2 SCFM
Three position non-rising adjustment knob: push to lock, pull to adjust, detach to make tamper resistant
Maximum pressure 200 PSIG
Operating temperature range 40 F to 160 F
View Complete Details

INTERMEDIATE REGULATORS

  • Model Number R332
  • Pipe Size 1/4"
  • Max.Flow SCFM 35
  • Length (inches) 2 3/8"
  • Height (inches) 3 1/2"
R332 INTERMEDIATE REGULATOR, 14" 35 SCFM FEATURES
Relieving style regulator
Diaphragm operation
Tamper-proof cap included
Easily panel mounted
Three position non-rising adjustment knob push to lock, pull to adjust, detach to make tamper resistant
Micro seat finish to ensure no reduced pressure creep
Operating temperature 40 F to 120 F
14" gauge ports
View Complete Details

High Flow Regulators

  • Model No. R3910G
  • Pipe Size 1 1/4"
  • Max.Flow SCFM 700
  • Adjustment Type T-Handle
  • Pressure Gauge Included
R3910G HIGH FLOW REGULATOR, 1 14" - 700 SCFM (Gauge Included) FEATURES
Micro finished brass seat to ensure no reduced pressure creep
Relieving sytle piston standard
High SCFM flow due to efficient aspiration
Hard epoxy corrosion protection
View Complete Details

CLEAR ADVANTAGE COMBINATION UNITS

  • Model No. CA-40-2
  • Pipe Size 1/2"
  • Max. Pressure 120 psi
  • Max. Flow SCFM 0 scfm
COMBINATION UNIT FEATURES
1-Quart
30 SCFM
Clear Advantage 1 quart unit with shut off valve & standard metal bowl filter with sight glass, manual drain Standard filter removes large amount of water in liquid form and ensures life of desiccant beads, unit comes with mounting brackets and safety guard.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Jack Mietus (Arrow Pneumatics Inc)
  • 2111 West 21st Street Broadview, IL 60155, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/arrow-pneumatics-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457720{main}( ).../index.php:0
20.01912061136include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.03132783128include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03953718824header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice