Ashby Cross Co., Inc.

United States

High Throughput System for Abrasive Adhesives - up to 1500 ccStrokeReduces Number of Cycles - Less WearHard Coated Components Reduce Wear and MaintenanceSeals and Packings are not Subject to Wear from AbrasivesRatios from 100:100 to 100:6 (volume)Pneumatically DrivenIn-Line Metering Eliminates PhasingHeavy Duty Powder Coated Frame on Casters Provides Flexibility

Capacity at 1:1 ratio is 175cc - full stroke.Air required is 100 psiRatio capability is 1:1 to 6:1Ratio change by changing the catalyst cylinderUsed with pourable silicone, urethane, epoxyBench mountableDisposable static mixersThe AC125 adhesive dispensing system is designed with high quality and low up front cost in mind. The system combines the same components used in other Ashby Cross systems along with manual operation. As a standard, are two, one-gallon tanks that feed the proportioning cylinders where the ratio of the material is established. Once the metering cylinders are full, the system is ready to dispense. By opening the manual mixdispense valve (or optional drip-free automatic dispense valve), adhesive flows through the static mixer. When empty, the system is recharged by moving the "dispenserecharge" switch to the recharge position. The cycle repeats.

For small-shot potting and encapsulating, syringe filling, or R&D material testing. Designed to process a wide range of 2-part reactive resin formulations. Highly reliable, dependable meter, mix system.

Provides X-Y-Z motion to the mixdispense head. Allows the mix head to move freely in 3 dimensions over a 12" x 18" area. Reduces operator fatigueIncreases productivityMay be retrofit to exisiting systems

The AC200 benchtop dispenser combines the simplicity and versatility of the dual barrel cartridge with bench mount support, pneumatic foot pedal, air logic, controls, and all the items needed to convert the cartridge to a benchtop potting and encapsulating system.

The 5-gallon pail level sensor is a non-contact, adjustable level sensor that provides low level information inside a covered pail. It eliminates the need to lift the cover to check levels. The sensor may be used in any non-metallic container to sense level. It eliminates the possibility of running equipment dry. With the use of additional sensors the system may be used to monitor several containers.

Molded in high density polyethylene with UV light block additive and including a double helix Luer lock hub, the TT Series tapered tip prevents blockage and increases the flow of high viscosity materials. In stock item from Ashby Cross.

All TS series tips securely fit Techcon Systems syringes and features a variety of performance options. The needle is crimped into an aluminum locking insert, then molded into polyethylene hubs whose color corresponds to gauge size. Corresponds to Luer Lock specification and is ready-to-ship from Ashby Cross.

This premium line of dispensing tips from Techcon Systems is burr-free, and has an electro-polished cannula for unobstructed and consistent material flow. The Techcon TE series needle consists of a stainless cannula with a double helix polypropylene hub and is silicone and chloride free. Available in stock at Ashby Cross with straight or bent tip.

Made from polypropylene, Techcon Systems flexible tip allows access to hard to reach areas and allows you to customize the length. Ideal for CA applications and sold in 1 inch lengths, these items are ready-to-ship from Ashby Cross.