Sterilizers #4953462

Suitable for Wastewater, Food Safety, Veterinary, Microbiology and Biohazard applications. Astells front loading Benchtop autoclaves require no plumbing and operates from a standard single phase power supply. Many customers choose this model not only for its small footprint, but also because it requires no services other than a standard power supply. This 'Classic' model UMB420BT requires manual water-fill where the user pours the water in the front of the autoclave between cycles to the required level and then during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle (available as an optional extra). This model is suitable for sterilizing: Liquids (media)Lab wasteGlasswareLab instrumentsThis model features A fully programmable touch screen color controllerAn electro polished stainless steel chamberA base shelf within the chamberAn ultra quick Swiftlock door mechanismA self contained design with no installation required - just fill it with water and plug it in and the machine is ready to be used.Angled chamber orientation, ensuring a greatly reduced water requirement every sterilizaion cycle.

Astells 'Compact' range of autoclaves requires no plumbing and operates from a standard single phase power supply. Many customers choose this model not only for its small footprint, but also because it requires no services other than a standard power supply. This 'Classic' model UMA440BT requires manual water-fill where the user pours the water in the top of the autoclave between cycles to the required level and then during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle (available as an optional extra - see technical tab above). This model is suitable for sterilizing: Liquids (media)DiscardGlasswareLaboratory InstrumentsThis model features A fully programmable touch screen color controllerAn electro polished stainless steel chamberA base shelf within the chamberAn ultra quick Swiftlock door mechanismA self contained design with no installation required - just fill it with water and plug it in and the machine is ready to be used.

The Astell top loading sterilizer range builds upon the smaller Compact range of top loading sterilizers by offering larger chamber sizes and also a variety of additional options which increase the versitility of the autoclave. This model is suitable for sterilizing: Liquids (media)DiscardGlasswareLaboratory InstrumentsThis model features A fully programmable touch screen color controllerAn electro polished stainless steel chamberDelayed start and media holdwarm featureExternal pressure guageSafety valve test program and emergency stop buttonValidation portDrain valveCastor mountedTimedPulsed freesteamingWith the additional of certain options available, this model of autoclave can be manufactured to your specific requirements. As standard, the autoclave is fitted with heaters in the base of the chamber, although this model is available as a 'Direct Steam' model (if an on site steam supply is available) or fitted with an 'Integral Steam Generator'.

The Astell 'Swiftlock' USB260BT is fitted with a large number of features as standard, making it very flexible. Additional options are also available on this range to make it capable of sterilizing almost anything. The versatility of additional options available means that this model of autoclave can be manufactured to your specific requirements. As standard, the autoclave is fitted with heaters in the base of the chamber, although this model is available as a 'Direct Steam' model (if an on site steam supply is available) or fitted with an 'Integral Steam Generator'. The base model USB260BT is capable of sterilizing: Liquids (media)DiscardGlasswareLaboratory Instruments

U-MVS109D - 109 Litre Manual Door Autoclave (Requires House Steam)The smallest autoclave in the square chamber "Laboratory" Range, the U-MVS109D is 109 litre autoclave with a 16" x 16" x 26" chamber. This specific model comes with vacuum as standard and a connection to allow house steam to be used with this machine. With a crisp modern design, the Laboratory range of Astell autoclaves looks at home in any laboratory and is well received amongst all our customers. With a selectable temperature range of 110C (219F) to 135C (275F), this range is particularly suited for the decontamination and sterilization of laboratory products. Applications include the sterilization of: Wrapped and unwrapped hard goodsPorous and non-porous hard goodsLiquids in unsealed open containersBiohazard wasteAnimal feedAnimal beddingBowie DickLeak testThe Lab series is a general purpose, compact designed vacuum steam sterilizer which has been specifically designed for the needs of todays shared laboratory. All models come with the following standard features: Easy to use color touch screen PLC controller.Temperature in degrees CelsiusFahrenheitPressure in PSI or BarEmergency stop buttonChamberjacketsteam pressure gaugesAdjustablelockable castors for easy installationStainless Steel fully jacketed rectangular chamberInternal base shelf and four position rackManual door (Looking for an Automatic Door? Click here)Recessed or external cabinet side panelsInk panel printerVacuum - A liquid ring vacuum pump as standard50+ programmable cyclesElectro polished chamberAuto drain cool down to 60C140F

Suitable for Wastewater, Food Safety, Veterinary and Microbiology applications. Astells front loading Benchtop autoclaves require no plumbing and operates from a standard single phase power supply. Many customers choose this model not only for its small footprint, but also because it requires no services other than a standard power supply. The Autofill version has an integral reservoir. Once filled, this provides water for up to 15 cycles. The reservoir also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle. This model is suitable for sterilizing: Liquids (media)Lab wasteGlasswareLab instrumentsThis model features A fully programmable touch screen color controllerAn electro polished stainless steel chamberA base shelf within the chamberAn ultra quick Swiftlock door mechanismA self contained design with no installation required - just fill it with water and plug it in and the machine is ready to be used.A pulsed-heat drying system, which is adjustable in 5 minute steps (available when running a non-fluid cycle. Not suitable for drying fabrics or porous loads). Available on 'Autofill' Benchtop models only.Angled chamber orientation, ensuring a greatly reduced water requirement every sterilizaion cycle.

The Astell top loading sterilizer range builds upon the smaller Compact range of top loading sterilizers by offering larger chamber sizes and also a variety of additional options which increase the versitility of the autoclave. This model is suitable for sterilizing: Liquids (media)DiscardGlasswareLaboratory InstrumentsThis model features A fully programmable touch screen color controllerAn electro polished stainless steel chamberDelayed start and media holdwarm featureExternal pressure guageSafety valve test program and emergency stop buttonValidation portDrain valveCastor mountedTimedPulsed freesteamingWith the additional of certain options available, this model of autoclave can be manufactured to your specific requirements. As standard, the autoclave is fitted with heaters in the base of the chamber, although this model is available as a 'Direct Steam' model (if an on site steam supply is available) or fitted with an 'Integral Steam Generator'.

The Astell Lab series of sterilizers is designed for use in todays shared laboratories. With a selectable temperature range of 110C (219F) to 135C (275F), they are particularly suited for the decontamination and sterilization of laboratory products. Applications include the sterilization of: Wrapped and unwrapped hard goodsPorous and non-porous hard goodsLiquids in unsealed open containersBiohazard wasteAnimal feedAnimal beddingBowie DickLeak testThe Lab series is a general purpose, compact designed vacuum steam sterilizer which has been specifically designed for the needs of todays shared laboratory. All models come with the following standard features: Easy to use color touch screen PLC controller.Temperature in degrees CelsiusFahrenheitPressure in PSI or BarEmergency stop buttonChamberjacketsteam pressure gaugesAdjustablelockable castors for easy installationStainless Steel fully jacketed rectangular chamberInternal base shelf and four position rackManual doorRecessed or external cabinet side panelsInk panel printerVacuum - A liquid ring vacuum pump as standard50+ programmable cyclesElectro polished chamberAuto drain cool down to 60C140F