Beka World LP

United States

Single line central lubrication systems supply lubricant to bearings on a cyclical pressure basis. Applications demand a wide range of pumps and system components.The BEKA range includes hydraulic, pneumatic, manual and motorized units to match the specific application.Lubricant: Oil and vicious oil NLGI 000-00ApplicationTo supply the lubrication requirements of small and medium sized machines, machinery groups and plants, such as machine tools, machining centers, weaving machines, textile machinery.

Large reservoir for very long operating times without refillingParticularly economical operation: Grease from large containersOptional lubricant level monitoring for highest securityTried-and-tested technology with desmodromic pump elementsAlso with hydraulic driveFunctionBEKA HAMAX EP consists of a grease pump with reservoir (capacity 2 - 16 kg) up to 3 pump elements PE-120 or PE-170 (fixed or variable).To protect the pump against vibrations, it is installed directly at the excavator.The lube point at the tool is connected to the pump by a high-pressure coupling and a high pressure hose.As soon as the hammer is activated, the pump supplies the lube point with chisel paste.The output is regulated by an adjustable pump element.

Lube-Shuttle Grease Guns Lube-Shuttle grease guns by MATO are designed to allow complete use of lubricating grease without leaking grease onto equipment, tools and clothing. We stock all three models of the Lube-Shuttle grease guns, all featuring re-useable screw-top grease cartridges.Lube-Shuttle keeps grease spills and leaks away from machine and shop surfaces:Premium quality leak-free constructionDurable zinc-plated steel barrelScrew-top refillable cartridgesIn-shop refill stations available

The single line central lubrication system BEKAWIND Single was developed especially for operation in wind converters. It can be used for the lubrication of all kinds of bearings including main bearings, blade bearings and yaw bearings.System DesignThe drawing to the right shows the design and the operating principle of a BEKAWIND Single central lubrication system for 3 blade bearings with each 6 lube points. The system consists of an electrical piston pump EP-1RS, 3 UE distributors with each 6 outlets, a pressure switch with manometer and the necessary tubes and fittings.The automatic lubrication system is controlled and monitored by the central controller of the wind converter. The lubricant is supplied as long into the main line, as the switching pressure of the pressure switch, which is situated at the end of the longest feed line, is reached.To achieve the switching-over of the distributor, the pump and the 22 way solenoid valve are switched off to release the pressure line. The remaining lubricant is delivered back to the reservoir.The automatic lubricating system is protected by a pressure relief valve with return flow to the reservoir. The reservoir is equipped with a level switch.

Heavy duty componentsSuitable for NLGI, no special grease requiredPump element with desmodromic drive for highest reliabilityIntegrated control unit EP-tronic with:3 operating modes: time, cycles or revolutionsElectronic monitoring of grease level, pump function, distributor function, pipe rupture, lubricant feedingSelection of operating conditions: easy, medium or heavyIntegrated data logger with diagnosis moduleInstallation kits availableUsed as initial equipment by leading OEMS

With rail vehicles, wear on the wheels and the rail itself is a major problem together with the noise generated.FluiLube wheel flange lubrication systems reduce the wear of rail and wheel as well as the noise load in curves in a very efficient way. FluiLube wheel flange lubrication systems offer innovative technology with tried-and-tested components and best cost-benefit-ratio.The application of a FluiLube system using thixotropic lubricating media with high solids content represents the solution to these problems.The FluiLube wheel flange lubrication is designed as single line system. There are no moving parts except the pump. This means: little wear, fewer maintenance requirements and therefore low life-cycle costs.The FluiLube system corresponds to standard DIN EN 50 155 and 61 373.

Different lubrication cycles can be controlled separately.The according work and break times are adjusted with the electronic control.The pre-lubrication switch activates an adjustable number of lubrication cycles.This serves for an intensive and quick lubrication, e.g. after the conveyor has been cleaned.

BEKA designs and supplies oil circulating systems from the pump station and the oil distribution up to the complete piping layout.Gear pumps from our own production can be adapted in construction and form to the requirements of the customer.Lubricant: OilApplicationFor all machinery and plants requiring oil circulation lubrication with or without cooling effect, such as rolling mills, calenders, gear boxes, printing presses, presses, paper machines.