Beta Calco

United States

FINHousing: Die-cast and extruded aluminium.External Screws: Stainless steel.Lens: Etched glass.Gaskets: One piece silicone.Finish: Silver powder coated RAL9006 or black powder coated.Drivers: HPF, electronic for 120-277V.Cable entry: M20 cable gland.Mounting: Anchorage rods required for concrete.Approvals: ETLUS, ETLC. Wet location IP65.

RING STATIC COLOR DIRECT & WHITE LED INDIRECT ILLUMINATION Body and trim: Steel and aluminum. Finish: Powder coated. Suspension: Stainless steel cables. Power cable: Silver braided. Diffusers: Opal polycarbonate, supplied in sections. Drivers: Integral, HPF electronic drivers for 120-277V, 0-10V, 1% dimming standard. Mechanical: Luminaires mount directly over J box (by others).

GEOBody and trim: Low copper, die-cast aluminum highly resistant to oxidation.Diffuser: 10mm0.36" tempered glass. IK 10 Mechanical resistant 20 Joule.Gasket: Silicone.Finish: Powder coated.External screws: A4 stainless steel treated with highly antioxidant water-repellent lubricating solution to ensure easy opening.Cable entry: PG13.5 gland for DIA 6-12mm0.24-0.47" cables.Drivers: HPF, electronic.Walk over: Static pressure load 6000Kg13000lbs.Rough-in housing: Thermoplastic.Mechanical: For in-ground or wall installation in poured concrete.

Body and trim: Steel and brass.Suspension: Single tube combined with three diagonal decorative tubes for stabilization.Finish: Gear tray, powder coated gloss white. Trim, powder coated or plated as listed.Diffusers: Acrylic.Dust covers: Clear polycarbonate.Drivers: HPF, electronic, 0-10V, 10% dimming standard.Mechanical: Luminaires mount directly over a junction box (not supplied).Remote emergency system: Emergency option provides a 1.5 hour emergency lighting facility.The remote system includes the inverter module, NiCad batteries and a remote wallceiling LEDcharge indicator and test switch (maximum distance between wallceiling plate and luminaire is4.5m15). Test switch fits a single gang box (not supplied).

BELARO REFLECTORBody and trim: Steel and aluminum.Finish: Powder coated metallic silver.Suspension: Twin aircraft cables (optional tubes for CFL).Power cable: Silver braided.Reflector: High purity aluminum, specular finish with vertical facets.Upper diffuser: UV stabilized acrylic.Decorative disc: 6mm1 4" glass with a polished edge and a sandblasted finish.Decorative ring: 6mm1 4" green tint, acrylic (faux glass) with a polished edge and a sandblasted finish.Drivers: Luminaires supplied with HPF electronic drivers, 120277V. 0-10V dimming standard (10%).Remote emergency: Emergency option provides a 1.5 hour emergency lighting facility. The remote system includesthe inverter module, NiCad batteries and a remote wallceiling LED charge indicator and test switch (maximumdistance between wallceiling plate and luminaire is 4.5m15). Test switch fits a single gang box (not supplied).Mechanical: Luminaires mount to a junction box (by others).

PEYOTEHousing: Die-cast and extruded aluminum.External Screws: Stainless steel.Lens: Clear polycarbonate.Gaskets: One piece silicone.Finish: Silver powder coated RAL9006 or black powder coated.Drivers: HPF electronic, 120277V. 0-10V dimming.Cable entry: M20 cable gland.Mounting: Anchorage rods required for concrete.Approval: ETL for wet locations, IP65.

SENTIS EQHousing: Die-formed steel.Horizontal bars: Die-cast zinc.Finish: Powder coated paint or plated.Reflector: Aluminum, white powder coated.Front diffuser: UV stabilized polycarbonate with vertical ribs.Rear side (halo) diffuser: Extruded opal acrylic.Upper and lower dust covers: Opal polycarbonate.Drivers: HPF, electronic for 120-277V. LED 0-10V dimming (10%) standard.Mechanical: Mounts directly to a standard electrical junction box (by others).Additional mounting points provided. Mounting hardware (by others).Approvals: ETL.

CRISTAL SMLHousing: Die-cast aluminum. Walk over 1000Kg2200lbs.Bezel: Stainless steel (optional).External Screws: Stainless steel.Lens: 6mm14" sandblasted glass with clear windows for LEDs.Gaskets: One piece silicone.Drivers: HPF, electronic for 120-277V. Trailing edge dimming 120V LED only.Minimum Starting Temperature: -30C.Conduit entry: PG11 gland for 11mm 5 8" DIA cable.Recessed housing: Molded polypropylene, gray, with stainless mounting trim. Specify as a separate line item.Approval: Wet location, IP67.

Body and trim: Aluminum.Finish: Powder coated.Suspension: Stainless steel cables.Power cable: Silver braided.Drivers: Remote, HPF electronic drivers for 120-277V (EU-240V), 0-10V, 5% dimming.Mechanical: Luminaires mount directly over J box (by others).

Body and trim: Steel and aluminum.Finish: Powder coated.Suspension: Stainless steel cables.Power cable: Silver braided.Diffusers: Opal polycarbonate.Drivers: Integral, HPF electronic drivers for 120-277V, 0-10V, 10% dimming standard.Mechanical: Luminaires mount directly over J box (by others).

TATTOHousing: Low copper, die-cast aluminum highly resistant to oxidation.Diffuser: 10mm0.39" tempered glass (12mm0.47" stainless steel version), Type B 15mm0.59". IK 07 Mechanical resistant 2 Joule.Bezel: Stainless steel or trimless glass.Gasket: Silicone.Finish: Double powder coating polyester high resistant to UV and oxidation.Reflectors: High purity aluminum.External screws: A4 stainless steel treated with highly antioxidant water-repellent lubricating solution to ensure easy opening.Cable entry: M20 cable gland for DIA 6-12mm0.24-0.47" cables.Drivers: HPF, electronic for 120-277V. Dimming 0-10V.Walk over: Static pressure load 500Kg1100lbs.Rough-in housing: Thermoplastic.Mechanical: For in-ground installation in poured concrete.