Post Your Requirement Menu

Welcome User

Other Products / Services

Leading Manufacturer, Supplier & Retailer of Taylor 6" Dual Action Sander, T-7311, Trumpf Electric Nibbler, N500, 5 feet per minute, CDI SURETEST Calibration System, 1-10 in.lb., 1/4 DR 101-I-MT CDI Torque Sensor and CDI Torky Wrench, 1502TP-1, 3/8" Male Square Drive.

Taylor 6" Dual Action Sander, T-7311

The Taylor?T-7311 is a 6" dual-action sander.???This?air controlled DA sander is a great finishing sander, because it is ?light and powerful, with rear exhaust.? While smooth and quiet, the Taylor pneumatic sander has a fast cutting action. for fast material removal.??The Taylor?7311 features a built-in regulator and a built-in muffler.? The heavy-duty ball bearing constuction assures longevity for your compressed air sander.? If you need a pneumatic dual action sander with a 5" pad, order 005-7311W5. 0.5 HP motor 6" pad size Dual action - random orbital or rotary 516-24 spindle size 10, 000 RPM 90 PSI Max. Air Inlet: 14" NPT Hose Size: 38" ID Length 19-1964" Weight 1.7 lbs. For 6" DA Sander, use Order Number: 005-7731 For 5" DA Sander, use Order Number: 005-7731W5

View Complete Details

Trumpf Electric Nibbler, N500, 5 feet per minute

Trumpf (TruTool) nibblers work on the principle of a "punching" cut. Downward chip discharge guarantees a clear view of the working area. The Trumpf Nibbler can be positioned in different directions, depending on the application. Trumpf nibblers provide maximum mobility in many applications including: nuclear decommissioning, recesses and fitting work, sheetmetal work, containers, recycling, plumbing and maintenance, car body work, demolition and dismantling. Suitable for use with high tensile materials Easy to change tools, which can be resharpened multiple times Features above-average tool life Cut quality remains consistently high Five year manufacturer warranty

View Complete Details

CDI SURETEST Calibration System

Listed here are all of the components to CDI's "Basic" SURETEST Calibration System, 5000-3. The system includes the 4-in 1-transducer, which is capable of calibrating torque tools from 4 in. lbs. up to 600 ft. lbs. Also included is the 600 ft. lb. loader and the SURETEST monitor.

View Complete Details

1-10 in.lb., 1/4 DR 101-I-MT CDI Torque Sensor

CDI Torque Sensor, 101-I-MT, is used with the CDI MULTITORQ portable electronic torque meter (Order No. 539-1600-MT). The Torque Sensor can be used with sockets, extensions, universal joints, ratcheting drivers or any combination of these. It is the perfect torque testing tool for bolt torque testing in a production environment. Torque sensors for electronic torque meters are sold separately. Accuracy ± 2% reading for 10-100% of sensor range. A Certificate of Accuracy traceable to N.I.S.T. is supplied with each transducer. CDI "Smart" Torque Sensors have a "Plug-and-Play" built-in EEPROM memory chip that stores sensor identification and calibration factors. The CDI torque sensor is factory calibrated, so that the sensor retains its accuracy with all MULTITORQTM meters.

View Complete Details

CDI Torky Wrench, 1502TP-1, 3/8" Male Square Drive

  • Length 5.25"
  • Weight 8.3 oz.
  • Torque Range 20-170 in.lb.
  • Drive 3/8" Male Square

The Torky 1502TP-1 is a right angle pre-set torque wrench manufactured by CDI. Torky wrenches operate bi-directionally and are designed for production torque applications that require higher values than a torque screwdriver can deliver. The comfortable design of the Torky wrench eases the strain of repeated uses. The torque value may be pre-set at the factory or it may be set by the operator utilizing a torque tester. When the proper torque value is reached, a momentary release or "break" can be felt. CDI's Torky wrench is designed to prevent wear of carbide inserts and damage to cutter heads due to improper clamp load.

View Complete Details

T-7759RK3 Angle Drill Kit

Taylor Belt SanderAngle Die GrinderAngle Drill Kit, T-7759RK3 contains the following tools in a molded, plastic storagecarrying case: Belt Sander, 38" x 13" Right Angle Die Grinder, 14" Right Angle Drill, 38"

View Complete Details

Taylor T-2X air riveting hammer

The Taylor T-2X air riveting hammer?has an extra sensitive teasing throttle and lightweight aluminum handle.??Hardened tool steel pistons and steel alloy cylinders guarantee long life for the Taylor T2X rivet hammer.??Taylor pneumatic riveting hammers are constructed with spool valves to assure slow heavy blows needed to drive rivets. ?Pneumatic air Rivet hammers are available with a straight handle, at additional cost.? Shank Diameter: .401 Bore & Stroke: 12"x2-14" Blows per Min: 2600 Length: 6-1116" Weight: 2-14 lbs. Air Pressure: 90 PSI Max. Rivet Capacity: ?18" of Aluminum

View Complete Details

T-7616 TaylorAir Scribe

  • Length 4
  • Weight 6 oz.
  • Hose Length 5 ft.

The TaylorAir Scribe, T-7616, is a quality, imported?air marking pen, which is suitable for marking materials, including steel, glass, wood, and ceramics.? The?Taylor air controlled?stylus is?designed for a wide range of?light industrial?applications, on materials ups to 64R in hardness.?? Taylor?air controlled?marking pens?are small, lightweight, and comfortable to use, with a?twist throttle.???Taylor pneumatic air?scribes have a trouble-free piston design, for low air consumption.? The?T-7616 Pneumatic?Engraving?Pen?features a carbide tipped stylus for precise marking.

View Complete Details

Taylor 7" Angle Sander, 1 HP, T-7716

  • Length 16"
  • Weigh 4-5/8 lbs.

The Taylor T-7716 Angle Sander is excellent for shaping and contouring patches, sanding body filler, and for heavy rust removal. The?T-7716 pneumatic air sander features total ball bearing construction and hardened and ground spiral bevel?gears, for long tool life.? A side handle, which provides right-hand or left-hand operation, is included.? This air controlled angle sander?has a built-in regulator, which allows the operator to control the speed of the spin.? The Taylor 90 Degree Sander comes with a 7" rubber backup pad, T-7470A.

View Complete Details

Taylor 1/2" Pistol Grip Impact Wrench, 325 ft.lb., T-7734

  • Weight 5 lbs.
  • Length 6 3/4"

Lightweight and compact, the heavy duty Taylor 12" Pistol Grip Impact Wrench, T-7734, ?is ideal for general duty automotive applications. The?pneumatic 12" Impact Wrench, constructed with built-in regulator, and ring-type socket retainer, has single-handed forward and reverse.

View Complete Details

Taylor Belt Sander

Taylor Belt SanderAngle Die GrinderAngle Drill Kit, T-7759RK3 contains the following tools in a molded, plastic storagecarrying case: Belt Sander, 38" x 13" Right Angle Die Grinder, 14" Right Angle Drill, 38"

View Complete Details

Angle Die Grinder

Taylor Belt SanderAngle Die GrinderAngle Drill Kit, T-7759RK3 contains the following tools in a molded, plastic storagecarrying case: Belt Sander, 38" x 13" Right Angle Die Grinder, 14" Right Angle Drill, 38"

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Greensboro, NC 27410 map, United States