cab Technology Inc

United States

The MAESTRO 4S separates both large and small PCBs quickly, economically and without stress. Cutting with only a single traverse of the pre-scored groove causes tensile and compressive stresses that can damage sensitive components near the groove. Even a second traverse of the groove accompanied by an adjustment of the blade distance substantially reduces the tensile and compressive stresses. This significantly improves the quality of the populated PCBs. The blade distance is entered on the operating panel and its adjustment is motor-powered.Up to nine programs can be stored.The materials used for PCBs are FR4 and aluminumThe continuously adjustable separation length is set with limit switches.The accumulated cutting performance is displayed for the purpose of scheduling preventive maintenance of the blade

MAESTRO 2 separates small amount and prototype series of PCBs fast and economically. The compact and stable aluminum frame requires only a minimum of space.MAESTRO 2is the reasonable model to start with, suitable for smaller numbers of PCBs. The PCB is fed manually between the circular blades and is thereby separated. MAESTRO 2M motorizedSeparates large numbers of PCBs without fatigue of the operator. The lower circular blade is driven by a motor. The PCB is fed between the circular blades where it is seized, transported and separated. Three different speeds can be selected. Especially useful for high packing density or thin edge stripes. Maestro 22M: Safe operationzoom in Strain of componentsFrequently for critical components an upper limit of tensile stress will be determined. Please ask us regarding possibilities to reduce tensile stress of components. Safe OperationThe PCB is held with both hands and fed between the circular blades for separation. The clearance between the upper guide and the lower guide is adjustable to ensure that the PCB is only fed through the machine in the pre-scored groove.

MAESTRO 5L with base frame is used most economically whenever large numbers of pre-scored PCBs need to be separated. The well-arranged control panel ensures easy operation. Machine with base frame - adjustable in height for optimal modification of each application. PCB Separator MAESTRO 5L with base framezoom inBlades: Titan coated serially PCB panels with maximum width of 310 mm can be separated by up to 11 pairs of circular blades simultaneously. Configuration of the blades is adjusted to your individual PCB also the cover and the guide. Sensors are used to monitor the separating process. The PCBs are placed either by hand or they feed automatically by a loading station. The machine can also be installed in an assembling line. The SMEMA interface is the standard connection for use.every machine is automatically prepared for dust extraction and with cleaning brushes for rear-end conveyor. PCB panels wider than 310 mm machine on request.