Post Your Requirement Menu

Welcome User

Our Products

  1. Nuts Bolts and Fasteners 3 Products / Services available
  2. Industrial Machinery 2 Products / Services available
  3. Clamps and Clamping Equipment 1 Products / Services available
  4. Laboratory Equipments 1 Products / Services available
  5. Musical Instrument Parts 1 Products / Services available
  6. Hydraulic Component 1 Products / Services available
  7. Industrial Drilling Machine 1 Products / Services available
  8. Living Room and Plastic Furniture 1 Products / Services available
  9. Machines and Equipments 1 Products / Services available
  10. Marine Cranes 1 Products / Services available
  11. Pumps, Pumping Machines & Parts 1 Products / Services available
  12. Automated Storage and Retrieval System 1 Products / Services available
  13. Sensors 1 Products / Services available
  14. Air Conditioner Parts 1 Products / Services available
  15. Commercial Air Conditioner 1 Products / Services available
  16. Hydraulic and Pneumatic Cylinders 1 Products / Services available
  17. Instrumentation & Control Equipment 1 Products / Services available
  18. Industrial Jacks, Lifts & Winches 1 Products / Services available
  19. Buckets 1 Products / Services available
  20. Gifts, Handicrafts & Artifacts 1 Products / Services available
  21. Office Automation Equipment 1 Products / Services available
  22. Industrial Valves 4 Products / Services available
  23. Other Products 30 Products available

Other Products / Services

We are leaders in the market for providing best range of Integrated Hoisting System, Drill Line Storage Reel, Annular Bop, Top-Mounted Compensator and Low-Pressure Annular BOP

Integrated Hoisting System

Addressing two pressing industry challenges—the requirement for higher hoisting capacity and the need for increased efficiency—Cameron combined its SmartHoist and SmartCrown systems, resulting in one integrated solution that significantly improves overall performance and efficiency. Advantages Up to 100% increased hoisting capacity in main well center 30% increased tubular tripping speed with same power input 30% less energy consumption at low weights compared with conventional drawworks systems Increased redundancy for dual well center units Ability to shift maximum hoisting capacity from one well center to the other Very high hoisting and compensating capacity in dual lift mode Reduced vertical center of gravity resulting in increased variable deck load Reduced installed power and weight onboard Compensator equipment at deck level for safe and easy maintenance

View Complete Details

Drill Line Storage Reel

The Cameron drill line storage reel (DLSR) is a simple but essential tool used to organize and streamline hoisting and rotating systems. The DLSR 7500 has been designed and engineered by Cameron to give operators greater control and to safeguard both personnel and equipment when cutting and slipping the drill line. The Cameron DLSR stores and spools drilling line and is hydraulically powered to ease slip-and-cut operations. When the drill line drum is empty, a new drum can quickly and easily be installed, thus reducing downtime. As a safety precaution, the DLSR is equipped with a mechanical parking brake to avoid accidental spooling of the drilling line. The DLSR is designed to meet HSE regulations. Specifications Robust frame and skid for drum carriage Quick change of drum Robust pinion and cog wheel transmission for drilling line spooling Hydraulic drive to ease slip-and-cut operations; hydraulic drive also serves as brake when not in operation

View Complete Details

Low-Pressure Annular BOP

  • Series sT-84

The T-84 low-pressure annular BOP offers reliable closing and sealing capabilities for well servicing and drilling applications.Application: land Bore sizes and working pressures 7 116-in 3, 000 or 5, 000 psi 9-in 3, 000 psi 11-in 3, 000 or 5, 000 psi 13 58-in 3, 000 psi Single-body style Synthetic rubber packer

View Complete Details

High-Pressure Annular BOP

  • Bore sizes and working pressures: 7 1/16- to 21 1/4-in 2,000–10,000 psi

Cameron DL high-pressure annular BOPs provide reliable performance in a shorter height and lighter weight than comparable annular BOPs. The unique design of the DL BOP does not require wellbore assist. The annular can close on drillpipe or large tubulars without reducing operating pressure, which minimizes risk of indention or damage to casing. Functionality Closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force the packer to close inward. As the packer closes, interlocking steel reinforcing inserts rotate inward to form a continuous support ring of steel at the top and bottom of the packer. The inserts remain in contact with each other whether the packer is open, closed on pipe, or closed on open hole.

View Complete Details

Annular Bop

Cameron DL high-pressure annular BOPs provide reliable performance in a shorter height and lighter weight than comparable annular BOPs. The unique design of the DL BOP does not require wellbore assist. The annular can close on drillpipe or large tubulars without reducing operating pressure, which minimizes risk of indention or damage to casing. Functionality Closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force the packer to close inward. As the packer closes, interlocking steel reinforcing inserts rotate inward to form a continuous support ring of steel at the top and bottom of the packer. The inserts remain in contact with each other whether the packer is open, closed on pipe, or closed on open hole.

View Complete Details

Top-Mounted Compensator

Our top-mounted compensator (TMC) systems are used to compensate for the relative movement between the drilling vessel and seabed. The range-of-motion compensation equipment for the drillstring and riser tensioners enables floaters to operate in some of the harshest environments. The compensator is highly accurate, with a 25-ft stroke and optional active cylinder, and is supplied with an accumulator, valve block skids, air pressure vessels (APVs), control system, and optional air compressors. The TMC's structure and engineering focus on using proven technology, intelligent design, and quality components to deliver a system that is robust, reliable, safe, and easy to operate. For example, the top mounting of the compensation system allows hook load variations to be addressed directly to the crown block, ensuring minimum weight on bit (WOB) fluctuations. The careful placement of the compensation cylinders allows all standard top drives to be lifted between them, which means no reduction of lifting height of the traveling assembly.

View Complete Details

derricks

Cameron delivers a variety of purpose-built drilling derricks that meet our customers’ loading and operational conditions. We design and fabricate the derricks to comply with all industry standards using the latest 3D design tools, focusing on low weight and life cycle cost, easy fabrication, quick quayside erection, and complete interfaces with drilling and third-party equipment. Derrick structures are available in various configurations for fixed or floating platforms, are built to handle triples and quads, and feature ratings up to 1, 250 t at the top drive stem. API monogramming also is available. Specifications Designed and fabricated according to the latest edition of API 4F model specifications ABS and DNV certified Area of operation according to customers' requirement(s), generally API Bull 2INT-MET (Gulf of Mexico) Weight-efficient structural design Designed for safe operation; compliance with North Sea safety requirements as a standard Designed for timely assembly at erection site 3D design for optimal layout, interface control, and clash prevention Corrosion-resistant hot-dip galvanized structure Generally designed for single lift onboard

View Complete Details

Drilling and Pressure Control Equipment Services

Cameron services and supports all of our equipment to ensure optimal performance and safety. OEM As the OEM, our rigorous inspection standards enable traceability for improved quality and reliability. Expertise Our expert engineers, field service technicians, and training specialists consult with customers to recommend the best service and support that meet customer need and maximize asset life. Global Presence With a people and facilities worldwide, we reduce operator downtime through 247 rapid response for efficient, high-quality service where it's needed, when it's needed. Specifications Inspection services Simple visual inspection Certificates of Conformance (COCs) Inspection of non-Cameron equipment Maintenance services Ad hoc field service Dedicated field service Asset Preservation Program (includes long-term storage and enables COC extension) Repair services Spares Testing Optimization services Upgrades and modifications Product training

View Complete Details

Land Drilling Packages

Bring greater efficiency and safety to your land rig drilling operations with Cameron packages. Our tailored offering consists of four modules that combine best-in-class equipment, comprehensive services, and a suite of auxiliary options—everything you need to reliably and repeatedly achieve superior safety and optimize drilling performance. Maximize uptime with a comprehensive solution Cameron supplies a comprehensive land drilling package from one supplier, enabling operations to begin as soon as the package is delivered at the rig site. This means decreased downtime for your crew and increased efficiency for your drilling operations. Customize options to fit your unique application Because drilling conditions vary tremendously, we offer auxiliary components to give you the ability to build a fit-for-purpose rig system. Flexible top drive and mud pump options to fit hole size and flow rate requirements Additional drawworks sizes and horsepowers Second chair configuration for the DCR Lift & Slide walking system Liquid- or air-cooled VFDs Additional BOP and ram sizes and pressure ratings to meet your criteria Specialized elastomers for H2S and high-temperature applications Manual, hydraulic, and electrically actuated well control and drilling chokes Wrangler BOP handling system for safer, faster, and more efficient transport and installation of BOPs to the well center Mud standpipe and cement manifolds

View Complete Details

Offshore Drilling Packages

Cameron offshore drilling packages combine our best-in-class equipment and comprehensive services. With a focus on improving rig efficiency, safety, and reliability and minimizing NPT, we help you achieve lower total cost of ownership and greater return on your offshore investment. Full life cycle support Cameron offers expertise at every stage of the offshore life cycle, combining proven industry technology with practical operational experience gained from projects worldwide. Conceptual design—conducting FEED studies and using modeling packages to maximize the capabilities of offshore rigs Detailed engineering—creating the right customized solution based on specific project requirements Project management—using the latest technology to address key areas of project implementation and planning, including systems engineering, safety procedures, documentation, and risk management, combined with an integrated, closely coordinated technical team Manufacturing—providing industry-leading drilling and pressure control equipment to meet the demanding requirements of modern offshore rigs and FPSOs Installation and commissioning—delivering and testing your system on time to achieve operational goals in the most efficient and economic manner while meeting budgetary and logistical constraints Life-of-field services—providing comprehensive support that includes technical expertise, as well as the training required for a better understanding of the equipment and systems on board the specific rig High-pressure control solutions—delivering the industry's first 20, 000-psi and 25, 000-psi large-bore BOPs. Quality and performance

View Complete Details

Small-Bore

  • Bore sizes and working pressures 7 1/16 or 9 in

The T-81 small-bore, compact ram-type BOP is lightweight and perfectly suited for well servicing, workover, and small-bore drilling applications. Its design offers easy operation and low maintenance. Manual and hydraulic options are available.

View Complete Details

Compact Ram-Type BOP

  • Body styles single or double

The T-82 compact ram-type BOP is suited for general onshore service. It is available in larger sizes than the T-81 small-bore, compact BOP, with a similar field-proven design that offers easy operation and low maintenance.

View Complete Details

Short-Body Annular BOP

  • Bore sizes and working pressures 7 1/16-in 3,000, 5,000, or 10,000 psiT-90
  • Series T-90

When vertical space is limited, the T-90 short-body annular BOP provides reliable closing and sealing solutions for well servicing and drilling applications.

View Complete Details

Ram BOP

  • Series 25,000-psi

In 2009, Cameron delivered the industry’s first 20, 000-psi large-bore drilling BOP stack. Building on its leading high-pressure technology, Cameron delivered the industry’s first 25, 000-psi large-bore drilling BOP stack in 2010 and a second one in 2014. Today, Cameron is still the only provider to develop a field-proven 25, 000-psi BOP.13 58-in design with 25, 000-psi working pressure Shell tested to 1.5 times working pressure Close ratio = 9:1 Hydraulic operating system rated to 5, 000 psi Operating system that is similar to that of EVO compact, offshore ram-type BOP with wedge lock technology Qualified according to API 16A, 3rd Edition and ASME Section VIII, Division 3, 2010 Edition

View Complete Details

Wireline Riser Tensioner

Cameron wireline riser tensioners are designed to maintain the riser string in tension on floating vessels and are currently available in three versions. The 160, 000-, 200, 000-, or 250, 000-lbf double-wire rope tensioners include idler sheaves, wire, rotating deadline drum, valve block skids, air pressure vessels (APVs), control system, antirecoil, and optional air compressors.

View Complete Details

Drawworks

We offer AC gear-driven drawworks concepts for onshore and offshore applications. A wide range of models are available in single-speed or three-speed designs with up to 6000-hp ratings. We offer technically advanced gear-driven, active-heave drawworks systems with up to 11, 200-hp ratings that are capable of compensating movements on large floaters and drillships. LDW Series LEWCO LDW AC gear-driven drawworks offer technically advanced features to increase drilling performance, safety and reliability. The combination of both cost and operational efficiency with small footprints, less weight and reduced noise and vibration further adds to the advantages provided by these solid machines. UltraHoist Series UltraHoist offshore drawworks delivers efficient hoisting and lowering during drilling, tripping and handling operations. All UltraHoist drawworks are AC and gear-driven. The three-speed version offers operational flexibility, both at high speeds and high loads. Cameron's UltraHoist drawworks is also simpler to use, and integrates many safety features that are not currently offered by other models. UltraHoist AHC Series UltraHoist active heave compensated (AHC) drawworks delivers safe and efficient hoisting and lowering during traditional drilling, tripping and handling operations, as well as accurate heave compensation during drilling or landing of the BOP to the seafloor. All UltraHoist AHC drawworks are gear-driven and available in three-speed or single-speed versions with power input from 4.500 hp to 9.000 hp and a load handling capacity of up to 1.250 short tons.

View Complete Details

Mouseholes

The main function of the mousehole is to hold pipe during standbuilding or stand breakdown. Mouseholes are designed to use the area below drilling and are flush-mounted with the drillfloor upon installation. Specifications Cameron mouseholes are available in a variety of designs: fixed telescopic rotating colt rabbit rotary-mounted fixed. All types can be equipped with Hydraulic or spring-powered centralizer Toolbox or bit breaker Torque wrench to make or break connections while building or breaking stands Patented shock absorber

View Complete Details

SmartRacker Vertical Pipe Handling System

The SmartRacker vertical pipe handling system triple and quad column rackers are advanced pipe handling systems for jackup rigs, semisubmersible rigs, and drillships. SmartRacker system triple and quad column rackers perform all vertical pipe handling operations on the drillfloor, including racking stands, building stands in the mousehole, picking up singles from the catwalk, laying out singles to the catwalk, and tripping in and out of the fingerboard. These systems are fully automated with a robotic control system that controls and monitors all operations and protects the machine and rig from operator failure. The machine can be operated in auto mode, semiautomatic mode, manual mode, override mode, and emergency mode. With its unique gripper head design, the SmartRacker system can handle all types of pipe, including production tubing, drillpipe, casing, and spiral drill collars. Using AC or hydraulic technology for all main functions, the SmartRacker system is accurate and reliable as well as easy and quick to operate. This efficient handling system is designed for the most demanding applications in offshore environments. It is designed according to DNV and NORSOK regulations and is CE marked.

View Complete Details

Drilling Control Rooms

We deliver a range of drilling control rooms (DCRs) to the drilling industry. Product offerings range from compact one-seater cabins to large well-construction centers, able to house essential drilling control and monitoring equipment as well as several operators and any additional auxiliary equipment and personnel. Each DCR is custom designed to meet the specified drillfloor layout and requirements. Cameron engineers control rooms for installation in any position that provides good overview and proximity to the drilling equipment. We can also design and deliver DCRs for elevated mounting (3 to 4 m above the drillfloor). The Cameron DCR may be designed with one to five X-COM chairs. The DCR is ergonomically designed to high standards with large windows, excellent views with a purpose-designed wiper system, and full insulation against noise and vibration.Self-supporting carbon steel unit (optional stainless steel) Integrated X-COM chair High-level noise and vibration dampening Line of sight investigated and confirmed via a clash and layout analysis using the project documentation Fully automatic window-cleaning system programmed for different weather conditions Fully adjustable downlights and emergency lighting fixtures with better backup in case of main power failure Removable, easy-to-clean, nonslip floor tiles Recessed ceiling with noise dampening Two emergency exits Sun-filtered safety windows with protection bars and grids to protect the top windows from falling objects and the front windows and DCR from moving objects Remote-controlled drilling operation

View Complete Details

Riser Catwalk

Cameron riser catwalk machines run horizontal from the riser rack area onto the drillfloor to deliver and pick up risers. Specifications Versatile to accommodate various drillfloor layouts, with a skate capable of up to 131 ft (40 m) of horizontal travel Uplift unit designed to lift the front end of the risers in order to accommodate for various riser gimbal heights Tail-in unit for tail-in of risers, which is built into the skate Includes transport frame, which allows for the transport of the various pieces of equipment to and from the drillfloor Fully automated system that can be interfaced with other machines on the drillfloor

View Complete Details

High-Pressure System

Cameron offers a range of integrated pump packages, including top- or rear-mount AC- or DC-electric drives, controls, manifolds, piping, and accessories for onshore and offshore applications. All equipment is designed and manufactured in accordance with specific project requirements, with local and remote control available. Specifications High-Pressure Shear Unit Effective shearing of drilling fluid Pressures to 10, 000 psi Easy installation Straight or angled top connection

View Complete Details

Low-Pressure System

Cameron's experienced team of engineers works with you to assess, calculate, and design your low-pressure mud system or equipment. We work with some of the world’s leading suppliers of LP equipment to offer low-pressure pump packages and agitating units to suit every operation. Specifications Low-Pressure Pumps DNV-type certified Semi-open special impellers High-quality bearings and mechanical seals Concentric casing design with heavier frames Agitating Equipment Shaft-type or submersible high-performance agitators Durable design Minimal energy consumption Minimal maintenance Space-saving and easy installation Functions according to ATEX and CE directive Tank Washing Equipment Streamlines process of mud pit cleaning Reduces personnel exposure to hazardous chemicals Designed for robust and reliable operation Constructed from highly corrosion-resistant materials Custom-engineered

View Complete Details

Mud Control Systems

Cameron mud control systems (MCS) include operator menus that utilize the latest in HMI application development to provide optimal overview, safety, and productivity. Our products offer enhanced visualization, providing better insight into the drilling fluid process operation, real-time monitoring of drilling fluids equipment from local and remote locations, and logical control and monitoring of individual equipment and complete systems to reduce the risk for human error. Our control systems also can be engineered as standalone systems or for integration with other control systems, such as Cameron’s OnTrack™ drilling control system. Specifications Complete Control Cabins Tailored to installation area layout Integrated control system equipment for hands-off mixing, dosing, and transfer operations Noise- and vibration-insulated housing Complete with windows, lights, and HVAC Field Instrumentation A range of field instrumentation packages are available to enhance and support the control experience Level indicators, pressure transmitters, and density transmitters have precise degree of measurementindication

View Complete Details

Mud Mixing System

Our mud mixing and additive equipment makes drilling fluid mixing operations smarter, safer, and more accurate. With our proven technology, hands-on experience, and innovative thinking, We have engineered a product portfolio that improves drilling fluid system operations from both production and operator standpoints. Whether you need a full system design or standalone equipment, We have mud mixing and additive solutions that help improve your operations. Specifications Sack Dosing Unit (SDU) Standalone unit with integrated control system Market’s most compact footprint Dust-free in operation Integrated waste compactor Can be assembled on a skid for easy installation Accompanied with a vacuum lifter and electro-hydraulic lifting table Sack Handling Robot Technology (SHR) Customized and highly flexible layout Scalable system for multiple palletschemicals Depalletizing robot Intelligent vision system Minimized exposure to chemicals for operators Reduced manual handling Increased automation

View Complete Details

Well Control System

Cameron offers a wide range of well and pressure control solutions to fit most applications. Our extensive experience and understanding of global characteristics combined with our metallurgical expertise serves as a valuable asset during your field development planning and execution. Specifications High-Pressure Manifolds Choke-and-killmud standpipe and cement manifolds Customized to project requirements Local and remote monitoring and control Designed to relevant ASME, API, NACE, and ISO standards Mud Gas Separator (MGS) Separates gas from drilling fluid Installed downstream of well control choke Installed in flowline if high-gas concentrations occur Excellent for underbalanced drilling Range of configurationscapacities available Custom-designed with capacity calculations

View Complete Details

Top-Mounted Manipulator Arm

Cameron top-mounted manipulator arms are designed to accommodate client demands for an efficient, safe, and rigid tubular handling system for all drilling operations. The manipulator arm is engineered to ensure low maintenance and long equipment life using industry-proven components and high fatigue-capacity materials. The manipulator arm comprises a hydraulic, remote-operated control system to provide smooth, natural, and comfortable operation. It has a safe working load (SWL) of 1322.77 lb (600.00 kg) at maximum stroke and is designed for permanent installation in the derrick at offshore drilling locations. Specifications High-capacity slew bearing on top-mounted slew base for permanent installation on derrick Heavy-duty tilt cylinders designed to secure redundancy in case of cylinder failure Hydraulic internal slew gears with well-proven design for slew purposes Internal twin telescopic cylinder with backside connections that secures high-speed extensionretraction and reduces the use of hydraulic hoses Interchangeable guide head with standardized interface Remote hydraulic control stand with hydraulic valve assembly for permanent installation Mechanical heavy-duty end stoppers for slew, telescope, and guide head tilt Proportional counterbalance valves for lifting (tilt), telescoping, and guide head openclosetilt Sensors for slew, tilt, and telescope for integration with the rigs anti-collision (optional) Emergency lowering system if hydraulic power loss occurs Dual retention of all fasteners Guide fingers are chamfered to reduce risk of overstressing the guide head or the manipulator arm structure

View Complete Details

Casing Guide

Cameron casing guides guide casing through the splash zone. By eliminating casing stick up movement, our casing guides yield a proven increase in casing running speed.

View Complete Details

BOP Handling Equipment

Cameron BOP handling equipment is developed to fit a range of operations, from small jackups to large semisubmersibles and floaters. Our BOP handling systems are designed to minimize the risk of disposal to sea, delivered according to recognized standards and tailored to fit customer needs.

View Complete Details

Wellhead Systems

Products and services for a wide range of applications Cameron wellhead systems and associated services can now be found in the Drilling section of www.slb.com. This move brings together into a single website all the equipment, services, and products from Schlumberger that are used by operators for constructing wells.

View Complete Details

Hydraulic Roughnecks

The design of the JiM 10 hydraulic roughnecks delivers a cost-effective, modern hydraulic roughneck in a compact format. Featuring an advanced control system, the JiM 10 hydraulic roughnecks keep safety in mind and are a sensible choice for today’s demanding drilling needs. Pipe range from 2 78 to 10 in [73 to 254 mm] for enhanced versatility Triple-grip torque wrench that delivers 166, 000 ft.lbf of torque High-performance spinner that can deliver 3, 500 ft.lbf of torque, improving efficiency during challenging pipe connections Smart technology for makeup and breakout of drill pipe and drill collars

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Donald
  • 8206 Cross PArk Dr. Austin, TX 78759, United States