Conveyor Belts #4953304

The patterned conveyor belt is composed of belt carcass and pattern. Pattern shape and height (depth) may be different because of different conveyed material and gradient of conveyor. The common kinds of profiled conveyor belt are as follows:

Raised edge conveyor belt is often used in order to prevent scatterance of conveyed materials. The belt is composed of belt and raised edge. Its structure and performance are as follows: Name Shape of the raised edge PurposeStraight-strip raised edgeconveyor belt There is a straight-strip raised edge higher than belt on either side of the belt. The height of the raised edge is 10 - 30mm. It can convey powder, granular, paste and liquid materials which scatter easily.Wedge-type raised edgeconveyor belt There is non-connecting wedge-type raised edge higher than belt on either side of the belt. The height of raised edge is about 20 - 80mm. It can convey powder, granular and small lump materials which scatter easily.Wavy raised edgeconveyor belt There is continuous wavy raised edge higher than belt on either side of the belt. The height of the raised edge is about 60 - 200mm. It can convey powder, granular small lump, paste and liquid materials which scatter easily.

The belt's core of the product selects high tensile strength fabric of polyester-duck. The product is made of highly heat resistant butadiene-styrene rubber, chloroprene rubber or ethylene propylene rubber or chlorobutyl rubber through the processes of compound shaping, vulcanization and finished after rubber covering etc. After a special dipping and setting treatment, the belt has high adhesion, less elongation as well as good wearability under normal conditions and is suitable for the use in industries of metallurgy, cement steel and iron, coking etc.

The general fabric conveyor belt is made of EP or NN fabric and finished through the processes of calendering, firming and vulcanizing, etc.It is suitable for conveying in normal temperature various non-corrosive pointless lumps, granular or powders such as coal, coke, sand and cement in bulk or packaged products.The belt is formed as cut-edged or mould-edged so as to meet requirements of different uses.We could offer belting with cover grades in accordance to International standards, like DIN 22102, RMA, AS 1332, SABS 11732000, IS 1891, BS 490, JIS K 6322 etc. are available.Belts are available in any width up to 100inch according to different requirement.Covers are manufactured for any required thickness. The selection of top and bottom cover thickness would depend on the loading cycle, material and need for balanced constructions.EP conveyor belt is suitable for transportation of middle and long distance, heavy load under a high speed.The characteristics are: Low load elongation; Good flexing capacity, troughable; Shook resistant and long-lasting; Water resistant, no change in different moisture condition; Heat resistant; Cannot be moldy Type Model: EP80, EP100, EP125, EP160, EP200, EP250, EP300, EP315, EP350, EP400, EP500, EP630, EP800

Oil resistant belt carry parts and components coated with machine oil; heavy-oil treated coal in cooking plants and electric power generating plants; soybean draff, fish, meat and other oily materials. materials containing non-polar organic solvents and fuel. The carcass is formed from polyamide or polyester plies.

The products with two types of General and Powerful adopt high adhesion, high strength nylon and vinylon-duck which finished through the processes of special dipping and compound forming, vulcanizing etc. The belt's core with NR and BR has properties of high elasticity, shock-resistant, cold-resistant. It is running normally under conditions of -40C and suitable for conveying various goods in freezing area and cold storage.