Clemco Industries Corp.

United States

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemcos extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time. Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationary, yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements. Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads. Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12 X 16 manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance. Clemcos Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a dead man switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces.

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemcos extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time. Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationary, yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements. Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads. Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12 X 16 manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance. Clemcos Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a dead man switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces. Available Literature:09310 - Big Clem Bulk Blast Machine Similar Available Products:60 Cuft Big Clem Bulk Blast Machines 120 Cuft Big Clem Bulk Blast Machines160 Cuft Big Clem Bulk Blast Machine

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemcos extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time. Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationary, yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements. Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads. Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12 X 16 manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance. Clemcos Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a dead man switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.Model 2463 holds 8 cubic feet of abrasive. Available as single or dual outlet Requirements for Operation These items are required but not included with this equipment: Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.NIOSH-approved, type CE, supplied-air respirator.Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.Appropriate blast suit, work boots, hearing and eye protection.Description of OperationThe operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.Model 1642 holds 2 cubic feet of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 5 (516-inch) nozzle. Model 1648 holds 3 cubic feet of abrasive providing approximately 15 minutes of blasting at 100 psi with a No. 6 (38-inch) nozzle. Requirements for Operation These items are required but not included with this equipment: Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.NIOSH-approved, type CE, supplied-air respirator.Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.Appropriate blast suit, work boots, hearing and eye protection.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.Model 3661 holds 10 cubic feet of abrasive. Requirements for Operation These items are required but not included with this equipment: Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.NIOSH-approved, type CE, supplied-air respirator.Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.Appropriate blast suit, work boots, hearing and eye protection.Description of OperationThe operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (14-inch orifice).Requirements for Operation These items are required but not included with this equipment: Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).Maximum working pressure 150 psiMinimum pressure 30 psi needed to operate OSHA-required remote control valvesNIOSH-approved, type CE, supplied-air respirator.Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.Appropriate blast suit, work boots, hearing and eye protection.Description of OperationThe operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 6 nozzle (38-inch orifice).Requirements for Operation These items are required but not included with this equipment: Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).Maximum working pressure 150 psiMinimum pressure 30 psi needed to operate OSHA-required remote control valvesNIOSH-approved, type CE, supplied-air respirator.Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.Appropriate blast suit, work boots, hearing and eye protection.Description of OperationThe operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages Four-wheel integral cart for ease of moving.Rated for 150-psi maximum working pressure.1-12-inch Millennium valve provides unrestricted air flow.Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.29-inch width fits through standard doorways.1-14-inch piping allows up to 50 percent increase in air flow, when compared to standard 1-inch pipingRobust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.Central hookup point for blast hose and remote controls.Weather-resistant storage area holds manuals, paperwork and small parts. Approvals and CertificationsClemco's quality management system is ISO 9001-2008 certified. Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.Model 1028 holds 12 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (316-inch) nozzle. Model 1042 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (14-inch) nozzle. Requirements for Operation These items are required but not included with this equipment: Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.NIOSH-approved, type CE, supplied-air respirator.Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.Appropriate blast suit, work boots, hearing and eye protection.Description of OperationThe operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Clemco's Industrial Blast Facility product line features equipment and accessories for contained blasting. The product line includes blast room enclosures, abrasive recovery systems, and dust collection systems. Clemco is uniquely positioned in the industry to offer a range of standard engineered recovery solutions, designed to handle the differing flow characteristics of commonly employed blast media. Clemco offers both pneumatic and mechanical systems tailored to ensure the highest levels of productivity and efficiency. For the name of the Authorized Industrial Blast Facilities Distributor near you, click the "Distributors" link.