Our Products #4785271

Commnets PowerBay+ BDFB is a modular breakerfuse bay with industry-leading monitoring, safety, and ease-of-use features. Available in 2, 4, 6, or 8 bus versions, the PowerBay+ BDFB is rated at up to 1200A per bus, up to 9600 amps total load. The bus configuration can be easily changed in the field by adding or removing bus straps, which can be safely done with the BDFB energized. Advanced monitoring features include bus voltage, total bus current, and optional individual load current. Bay status can be remotely monitored via HTTP, SNMP, and Modbus. Features

OverviewThe PowerBay High Density BDFB DC Distribution Bay is a small footprint DC distribution cabinet for multiple applications. Measuring at 7 high, it has a small footprint requirement that installs in typical existing customer rack spaces. It includes removable, powder-coated steel side panels for wiring access, removable clear plastic rear panels, and front panel powder-coated steel blanking plates for unused panel positions. FeaturesHigh power density and ampacityDual, Triple, or Quad bus configurations (1200A per input bus)Front access bullet terminal circuit breakersCSI HDDC high density bullet terminal breaker-panels accept 5100A single-pole or 150200A dual-pole circuit breakersCable management features lacing bars and guides that provide for neat, organized, and reliable inputoutput cable routingSupervisory controllers provide voltage, current, and breaker trip alarms, per circuit current monitoring, and ethernetGJX panels accept 100A225A single-pole, 250A400A dual-pole GJ1P circuit breakersDownloads

OverviewThe Sidecar PDF is a small footprint side-mounted PDF system for adding additional primary distribution to Commnet power plants. Bus connections allow for easy connection to existing Commnet power plants without any additional cabling. Tiered internal terminations allow for easy landing and lacing of cables inside the cabinet. The system is available in left and right mount, with GJ Breaker and TPL fuses for over current protection. It is also available in an optional standalone configuration featuring a top feed solution. Features1800A, 2900A, and 4000A Maximum Distribution Ampacity Options availableTPL Fuse Positions or Large Frame Circuit Breaker Output Circuit ProtectionSmall 12 in x 25 in FootprintDirect Bus Connection to Power Plant or Standalone Cable Options for InputMounts to side of Commnet PowerPlant SystemsAvailable in Left and Right Mount ConfigurationsUnmatched safety & reliability

FeaturesHigh ampacity DC battery disconnect device for telecom applicationsTop terminal mount400 1, 200 ampere modelsHydraulic-magnetic circuit breaker over-current protection versionsNon-current limiting, switch-only versionsOptional integrated NFPA code compliant thermal runaway detection systemDownloads

OverviewThe DCX Low Profile is designed to work with C&D Battery stacks and provide battery disconnect functionality where rack to ceiling space is limited. The design provides cable access on the top, back, left or right sides of the disconnect enclosure to maximize installation flexibility when used in space constrained applications. FeaturesHigh ampacity DC battery disconnect device for telecom applicationsLow profile enclosure design1, 000 and 1, 200 ampere modelsNon-current limiting, switch-only versionsIntegrated NFPA code compliant thermal runaway detection systemIntegrated chargedischarge current measurement, local display and remote network accessible data

The DCX LP DC Battery Disconnect System provides over-current protection for battery sourced equipment and wiring. It also functions as a service disconnect in order to maintain batteries, or to shut down the battery source connection in emergency situations. The DCX LP features a low profile enclosure design for locations with limited height allowance. It also provides multiple cable routing options to maximize installation flexibility in space constrained applications. Our Thermal Runaway Detection (TRD) system is included. All necessary installation hardware is shipped with the DCX LP and installation does not require additional drilling or hardware. Installation and operation are simple. FeaturesHigh ampacity DC battery disconnect device for telecom applicationsLow profile enclosure designBreaker trip rating of 1200ATop rack mounting configuration with multiple cable routing optionsHinged flip-up front access panelClear removable inspection window covers for lug mounting accessDownloads

FeaturesHigh ampacity DC battery disconnect device for telecom applications400 - 1, 200 ampere modelsMagnetic circuit breaker over-current protection versionsOptional current shuntNon-current limiting, switch-only versionsOptional integrated NFPA code compliant thermal runaway detection systemWall mount and rack mount configurations availableReversible left-swing or right-swing doorFlexible cable entry

Commnets AM Breaker Panel is an advanced vertically-oriented circuit breaker module that provides robust, high-density DC power distribution for rack mount servers and broadband applications. The AM Breaker Panel is available with an 800A or 1200A maximum rating and can be easily installed into Commnet Systems' PowerBay+ Full and Half-sized BDFBs. Features22 bullet circuit breaker positionsPer-breaker current measurement800A and 1200A maximum rating availableAlarm LED per breakerBreaker compartment lightHot pluggableSupports up to 125A per single pole circuit breakerModular designUnmatched safety & reli

Features(6) GJ breaker positions1200A maximum ratingAlarm LED per breakerModular designUnmatched safety & reliability

CSI introduces an innovative "drop-in" solution for providing NFPA fire code-compliant venting and hydrogen detection for Valve Regulated Lead Acid (VRLA) battery rooms in communications facilities. The H2 Zero system provides hydrogen sensing, temperature sensing, and -48VDC powered fan air movement for battery rooms. The CSI H2 Zero is an integrated, complete solution for high reliability battery room venting, hydrogen outgassing detection, and remote alarm. FeaturesIntegrated VRLA battery room ventilation system is fire code-compliantRemote sensor modules for hydrogen and temperature measurementIncluded adapter allows interfacing with standard 6-8" round HVAC ductingInternal fan tray allows reversal for either intake or exhaust operational selection1, 500 CFM N+1 redundant, and 2, 000 CFM non-redundant air flow-48VDC input (dual redundant AB DC inputs with integrated input fuses)Status and alarms displayed via wall-mounted supervisory control panel with LCDForm C dry alarm contactsMajor and minor alarm contacts for remote alarm indication of hydrogen detection andor system faultIntegrated motor operated output damper (opens when fans operate)Fire suppression interlock input (closes damper if fire suppression system active)Downloads