Gaskets #5179016

Cloth-inserted Rubber (SBR, Neoprene, EPDM, Buna-N) is a rubber sheet with a polyester, nylon, cotton, or fiberglass fabric impregnated in the rubber. Cloth reinforcement improves dimensional stability in flanged gasket applications with high compression loads. The fabric helps to reduce tearing when fastened. The materials construction typically includes one ply of fabric for each 116 thickness. We typically stock CI Rubber with thickness ranging from 116 to 38 thick.

Commercial Gasket & Packing produces die cut gaskets and water jet cut gaskets in a variety of TEADIT compressed non-asbestos materials, including (but not limited to); NA1001, NA1076, NA1080, NA1081, NA1085, NA1090, NA1092, NA1100 and NA1000M. NA1001 (green): is a compressed non-asbestos gasket material produced from a combination of synthetic fibers and bonded with nitrile rubber (NBR). It is a very good general service gasket material that has numerous applications in the process and wastewater industry. It is also commonly used in equipment such as pumps and valves. It is rated for temperatures up to 750F. NA1076 (multiple colors): is a compressed non-asbestos gasket material produced from a combination of aramid and other synthetic fibers and bonded with neoprene rubber (CR). It is a good all purpose sheet that is formulated to handle a broad range of refrigerants. It is suitable for services handling water, saturated steam, oils, fuels, mild acids and alkalis. It is rated for temperatures up to 700F. NA1080 (whiteoff-white): is a compressed non-asbestos gasket material produced from a combination of Aramid Fiber, inorganic fillers and bonded with styrene-butadiene rubber (SBR). It has numerous applications in the process industries handling media such as; mild acids and alkalis, water, brine, saturated steam, air, industrial gases, general chemicals, neutral solutions. It is rated for temperatures up to 716F. NA1081 (blue) is a compressed non-asbestos gasket material produced from a combination of DuPont Kevlar, inorganic fillers and bonded with nitrile rubber (NBR). It has numerous applications in the process industries handling media like: mild acids and alkalis, water, hydrocarbons, oils, gasoline, steam, air, industrial gases, general chemicals, neutral solutions. It is rated for temperatures up to 752F. NA1085 (purple) is a compressed non-asbestos gasket material produced from aramid fibers and bonded with hypalon rubber. It is specifically formulated to provide an effective seal against most acids in the process industries. It is rated for temperatures up to 464F. NA1090 (multiple colors): is a compressed non-asbestos gasket material produced from inorganic fibers, reinforced filler and bonded with nitrile rubber (NBR). It is a general purpose material suitable for services in the following general media categories: mild organic and inorganic acids, diluted alkalis, water, brine, steam, industrial gases, animal, synthetic and vegetable oils, petroleum & derivatives, general chemicals, neutral solutions and air. It is rated for temperatures up to 750F. NA1092 (grey) is a compressed non-asbestos gasket material produced from aramid fiber, graphite, reinforced fillers and bonded with nitrile rubber (NBR). It is a general purpose material suitable for services in the following general media categories: mild organic and inorganic acids, diluted alkalis, water, brine, steam, industrial gases, animal, synthetic & vegetable oils, petroleum & derivatives, general chemicals, neutral solutions and air. It is rated for temperatures up to 750F. NA1100 (black) is a compressed non-asbestos gasket material produced from inorganic fibers reinforced filler and bonded with nitrile rubber (NBR). It is a general purpose material suitable for services in the following general media categories: mild organic and inorganic acids, diluted alkalis, water, brine, steam, industrial gases, animal, synthetic & vegetable oils, petroleum & derivatives, general chemicals, neutral solutions, air, refrigerants and aliphatic solvents. It is rated for temperatures up to 750F. NA1000M (black) is a compressed non-asbestos gasket material produced from aramid fibers reinforced with a woven wire mesh and bonded with nitrile rubber (NBR). It is a general purpose material suitable for services in the following general media categories: mild organic and inorganic acids, water, brine, industrial gases, animal, synthetic & vegetable oils, petroleum & derivatives, air, and aliphatic solvents. It is rated for temperatures up to 720F.

Gaskets title=Die Cut Garlock Blue-Gard Gaskets align=right height=290 width=300>Commercial Gasket & Packing produces die cut gaskets in a variety of Garlock Blue-Gard compressed non-asbestos materials, including (but not limited to); Blue-Gard 3000, Blue-Gard 32003400 and Blue-Gard 3300, Blue-Gard 3700. Blue-Gard 3000 (Blue): is a unique blend of aramid fibers with a nitrile binder. It has excellent ability to seal which creates less waste and lower energy consumption. It is used in general industry including: water and wastewater treatment; oil and gas production; food processing, pipe flange gaskets and boiler gaskets. It is rated for temperatures up to 700F. Blue-Gard 32003400 (Off WhiteBlack): is a unique blend of aramid fibers with an SBR (Styrene Butadiene Rubber) binder. It possesses excellent sealing characteristics with good torque retention. It is a cost-saving material with low emissions. It is used in general industry including: power generation (steam); water and water treatment, and gas production & delivery. It is rated for temperatures up to 700F. Blue-Gard 3300 (Black): is a blend of aramid fibers with a neoprene binder. It is effective against oils, fuels and refrigerants. It is used in general industry including: refrigeration, petroleum, oil & gas production; power generation (saturated steam) and water distribution and treatment. It is rated for temperatures up to 700F. Blue-Gard 3700 (Light Grey): is a blend of aramid fibers, inorganic fillers and an EPDM (Ethylene Propylene Diene Monomer) rubber binder. It is used against acids and caustics of moderate concentrations. It adds exceptional resistance to both weather aging and ozone. It is rated for temperatures up to 700F.

Commercial Gasket & Packing produces die cut gaskets and water jet cut gaskets in a variety of Thermoseal (Klinger) compressed non-asbestos materials, including (but not limited to); C-4201, C-4300, C-4401, C-4324, C-4430 and C-4433. Klingersil C-4201 (white) is a compressed non-asbestos sheet made with synthetic aramid fibers bonded with a nitrile binder. It has excellent resistance to hot water, steam, oil and solvents with good anti-stick properties. This is an excellent OEM material. It is rated for up to 700F. Klingersil C-4300 (whitegreen) is a compressed non-asbestos sheet made with synthetic aramid fibers bonded with a nitrile binder. It has good ability to seal and is chemical resistant. This is a good general-purpose sheet. It is rated for up to 700F. Klingersil C-4401 (green) is a high quality compressed non-asbestos aramid fiber with a nitrile rubber binder. It has high heat resistance, chemical stability, and high torque retention and anti-stick properties. It is rated for up to 700F. Klingersil C-4430 (whitegreen) is a premium grade compressed non-asbestos material composed of fiberglass, inorganic and aramid fibers that are bonded with nitrile rubber. Its properties include excellent chemical resistance, high temperature resistance in steam and water, and good creep resistance. It is manufactured to high specifications and often used in the aerospace industry. It is rated for up to 700F.

Composition cork is a lightweight and stable material. It is made from a hydrophobic substance that prevents water from penetrating. It exhibits excellent compressibility and moisture resistance and an aesthetic appearance making it popular for consumer product applications. Composition cork materials have high oil resistance, a high degree of compressibility and practically no lateral flow. They also possess an inherently high friction value and can withstand extremely high bolting pressures without crushing the material. Advantages of Composition CorkExtremely CompressibleExcellent Insulation & Fire Retardant QualitiesHighly Resistant to Wear & TearUnaffected by temperature extremesResistant to Sound & SeepageLightweight & BuoyantVirtually Indestructible Typical composition cork applications include: coaster & trivet backing, glass separation pads, gaskets, seals, strips, washers, bulletin board, protective padding, adhesive-backed bumpers, spacers and feet, die cut coasters & discs. Cork Rubber GasketsCork Rubber material is a combination of first grade granulated cork and a synthetic rubber polymer. This gives the product the high resilience of rubber and the compressibility of cork. It is manufactured by combining the cork, glycerin-glue, and a rubber binder under heat and pressure. The material is usually 70% cork to 30% rubber binder. The rubber is added to provide the ability to seal and provide chemical compatibility while helping to resist fungus, acid and weather conditions. It is an excellent material for gaskets and other industrial applications. Cork rubber material is available in a wide variety of rubber options including: EPDM, Natural Rubber, Neoprene, Hypalon, Silicone, Viton, Nitrile (Buna-N) to best suit the chemical resistance requirement of the gasket. The selection of the best blend of cork and rubber with the correct density will ensure that the finished cork gasket or cork product will last for many years in your application. Advantages of Cork RubberHigh Compressibility & FlexibilityWide range of fluid compatibilityGood Resistance to oil, solvent, and fuelModerately resistant to fungus, acid, and weather conditionsResistant to fluid penetrationReduces levels of transmitted vibration, acoustic insulationGood for low bolt load applicationAnti-slip and impact-resistant, shock absorber Typical cork rubber applications include: gaskets, bumpers, spacers, stripping, protective pads, anti-vibration, electrical transformers, electrical switchgear, sumps, and crank case covers. Cork rubber gaskets are used in a wide range of industries including: automotive, railroad, aviation, agricultural, tractor, ship, transformer, petroleum, compressor and electrical equipment. Please visit our gasket materials page for more information on our extensive selection of materials. Cork materials are available with or without pressure sensitive adhesive (PSA) backing.