Our Products #4936891

We are providing 2.4 oz. and 2.9 oz. carbon fabrics with a bias cut option. The illustration below will give you a visual on how we do this. The result is a parallelogram. If you order a 1-foot piece, the short side will measure 12 inches and the long side 55 inches. The most critical dimension is the 8.25 inches perpendicular to the 55 inch cut edge.Model aircraft builders typically use this cut on the leading edge of their wings to carry torsion loads. To create a d-box, wrap the bias cut carbon from the top of the spar, around the leading edge to the bottom of the spar. The spar acts to close the d-box. To determine the amount you need to order, measure the distance around the leading edge and divide by 8.25". Round up to the next whole number and order that many feet. For example: If you measure 7" and you are making two wing d-boxes, divide 14" by 8.25" = 1.7 or 2 feet. You will receive a piece 24" on the short side, 55" on the long side and 16.5" perpendicular to the long side. See the diagram below:

Unidirectional carbon fiber pre-preg may be stored at 72F for 30 days. For maximum shelf life, store in a freezer and bring up to room temperature for fabrication.CURE SCHEDULE: Ramp temperature at 6 F per minute to 175-200 F depending upon the desired viscosity. Hold for 20 minutes to allow for any trapped air or gas to escape. Ramp to 275 F at 6 F per minute and hold for 1 hour, cooling to 250 F prior to removing from the oven. SPECIFICATIONS: Fiber aerial weight: approx. 150 grams per square meter, Resin content: approx. 35%, Thickness: 0.005-0.006", Yield: approximate 20 sq. ft. per lb., Width: typically 24". MSDS available upon request. SHIPPING:Add $20 for custom packaging, includes insulation and ice. During the summer months, NEXT DAY shipping is recommended.

The lightest fiberglass fabricSoft drapeIdeal for use in Extreamly light modelsAnywhere minimum weight is very important Fiberglass Cloth, 0.7 oz., 38" wide, 2 yd. pkg. G01060-38 $11.50 Fiberglass Cloth, 0.7 oz., 38" wide, 5 yd. pkg. G01061-38 $20.75 Fiberglass Cloth, 0.7 oz., 38" wide, 10-24 yds. Price per yard, Minimum quantity 10 yds. G01062-38 $3.00 Fiberglass Cloth, 0.7 oz., 38" wide, 25-99 yds. Price per yard, Minimum quantity 25 yds. G01063-38 $2.30 Fiberglass Cloth, 0.7 oz., 38" wide, Volume Pricing - 100+ yds. Price per yard, Minimum quantity 100 yds. G0106B-38 $1.81 Fiberglass Cloth, 0.7 oz., 38" wide, Volume Pricing - 500 yds.rl. Price per yard, Minimum quantity 500 yds.

30% stronger than E glass15% stiffer than E glassOperating temperatures to 1500FIdeal for use in high performance parts In surf boards and wind surf boardsAnywhere higher strength to weight and toughness are needed

Light fiberglass tapeNarrow sizesIdeal for use in Extreamly light partsSmall partsFiberglass Woven Tape0.5" wide, 0.003" Thick, 3 yd. pkg. GT03051 $3.95 Fiberglass Woven Tape0.5" wide, 0.003" Thick, 10 yd. pkg. GT03052 $6.95 Fiberglass Woven Tape0.5" wide, 0.003" Thick, 72-yd. roll

Extreamly flexible50 ftlb, 17.3 ozsq yd.018" thicknessIdeal for use in Seam joiner tapeReinforce edges and corners Braided Fiberglass Tape, 2" wide, 1-9 ft. Price per foot, Minimum quantity 1 ft. GTB221 $2.70 Braided Fiberglass Tape, 2" wide, 10-24 ft. Price per foot, Minimum quantity 10 ft. GTB222 $1.35 Braided Fiberglass Tape, 2" wide, 25+ ft. Price per foot, Minimum quantity 25 ft. GTB223 $1.15 Braided Fiberglass Tape, 2" wide, Volume Pricing - 2+ lbs. Price per pound, Minimum quantity 2 lbs.Yield Approx. 50 ft.lb. GTB223-B $43.95

Light weight braided tubeVery flexable over a range of diametersIdeal for use in Wrap long thin parts for added strengthConforms to the diameter of the core

Random fiber veilVery thin and light weightIdeal for use in Surface layer with gel coatFiberglass TissueVeil, 0.3 oz., 1 yd. pkg. 1 yd. pkg. G941 $10.00 Fiberglass TissueVeil, 0.3 oz., 2 yd. pkg. 2 yd. pkg. G942 $13.00 Fiberglass TissueVeil, 0.3 oz., 3+ yd. pkg. Price per yard, Minimum quantity 3 yds. G945 $6.30 Fiberglass TissueVeil, 0.3 oz., Volume Pricing - 100 yds.rl.

Random fiber matStrength in all directionsIdeal for use to Rapidly build up thickness Chopped Fiberglass Strand Mat, 1.5 oz., 2 ft. pkg. G811 $5.95 Chopped Fiberglass Strand Mat, 1.5 oz., 10-24 ft. Price per foot G812 $2.20 Chopped Fiberglass Strand Mat, 1.5 oz., 25+ ft. Price per foot G815 $1.90 Chopped Fiberglass Strand Mat, 1.5 oz., Volume Pricing - 100 ft.rl.

Aramid fibers are typically gold in color and require very sharp shears for cutting. Kevlar is DuPont's trade name for aramid. The best applications are where toughness is desired. Aramid is difficult to sand and is adversely affected by UV light so it is often buried under fiberglass or other material. Values shown are based on typical fiber data and should be used as a guide, not a specification. (Kevlar is a Registered Trademark of Dupont)