Post Your Requirement Menu

Welcome User

Other Products / Services

Leading Manufacturer, Supplier & Retailer of TTW Series Water Type Mold Temperature Controllers, Three Five Axes AC Servo Driven Robots, Single Axis AC Servo Driven Robots, Spruce Picker and industrial robot.

TTW Series Water Type Mold Temperature Controllers

Description: Water Type Mold Temperature Controllers use water as heating media to realize heat exchange by direct cooling for standard temperature control from 120-160 degrees. Water type has its superiorities with high efficient heat transmission, less pollution, water resource easy to be attained with low cost

View Complete Details

Three Five Axes AC Servo Driven Robots

Three Five Axes AC Servo Driven Robots Three Five Axes AC Servo Driven Robots are extensively applied to horizontal plastic injection machines from 75~3000T which are mainly designed for rapid and precise removal on strict demands of good appearance of finished products and spruces. There are two types of arms – single stage and telescopic. The vertical strokes for single stage are 700800900 and for telescopic are 800900100011001300150017002000mm. Full AC servo motors are driven on three axes (traverse crosswise main arm) and fiveaxes (traverse crosswise & vertical for main arm & sub arm), take-out at super high-speed 1.4 sec and dry cycle time within 5.6 seconds. All linear movement are controlled by servo driven control systems to cooperate with high rigidity structure of linear guide rail for realizing high precise take-out and accurate repeatability. Structural Units High rigidity structure design, stable construction, low vibration, abiding and long service life. High Performance Imported Ac Servomotor Working with high precise linear guide way and imported steel wire belt driven result in high speed, low noise, precision position at ±0.1mm. Control System Micro-computer control system was programmed & developed by TOPSTAR, write the program with more safety protection functions to provide safeguard for operator and IMM in accordance with insufficient safety protection for domestic IMM situation. In addition, we also can write the special program to meet customers’ special requirements for matching the various molds and grippers. Palm controller incorporate, changeable Chinese English screen page, easy learning. Multi-functions and programs are provided for selection, automatically detecting, displaying and recording the malfunctions, conveniently maintain and problem solving.

View Complete Details

Single Axis AC Servo Driven Robots

Single Axis AC Servo Driven Robots are extensively applied to horizontal plastic injection machines ranging from 50 ~1800T which can take out the runners, runner and finished products from the mold of plastic injection molding machines. There are two types of arms-single stage and telescopic. The vertical strokes for single stage are 600800 and for telescopic are 60080090010001200mm. The arms move stably thanks to two sections of double speed structure. The traverse movement is driven by high performance AC servo motor. With different requirements of products, robot can work with various grippers and jigs to realize stable & perfect take-out products from mold by quick- descent of removal of products and slow -descent to place outside. Mechanical Structure High rigidity structure design, stable construction, low vibration, abiding and long service life. Vertical and crosswise movement is driven by pneumatic cylinder. Traverse, crosswise and vertical unit adopt high precision linear guide way result in high speed and accurate position, high wear resistance, heat resistance, long service life without distortion. High Performance Imported Ac Servomotor Working with high precise linear guide way and imported steel wire belt driven result in high speed, low noise, precision position at ±0.1mm. Jig Circuit Molded parts are quickly remove from the mold and placed them carefully outside of machines. “Remove quickly and place carefully, require various jigs according to different products to realize stable and perfect motion – remove and place products safely.

View Complete Details

Spruce Picker

Etensively applied to horizontal vertical plastic injection machines ranging from 50T~ 250T which can rapid take out the runners, runner and finished products from the mold of plastic injection molding machines, and place runners or runner into beside-the-press granulator for recycling immediately. There are two types of arms-single stage and telescopic. The vertical stroke for single stage is 550mm and for telescopic is 650mm. This series equipped with wrist rotation mechanism and gripper sensor can rotate products with 90°. Structural Units Employed high strength & tension aluminum alloy to work with precise linear guide way, features with light weight, wear resistance, long service life. Wrist Rotation Mechanism The arm front section for installing gripper can rotate 90°; absorbs & gripper jig can be installed with sensor device for detecting to get products or not. Safety Protection External signal interlock with injection molding machine to have double safety protection for molds to ensure no locking molds if parts are not taken out via the signal confirmation of finished product removal. Control System Palm controller, friendly operation interface, easy operation.

View Complete Details

industrial robot

Topstar Industrial robots are widely used in welding, stacking, punching and other aspects of industries. multi-axis robot posture structure expands the freedom, without interference; the operating characteristics of high-speed, improves production efficiency; the best means of improving the structure of the welding quality. Universal high-speed robot is also applicable to arc welding; compact, slim design saves more space. 1: F = base formula, W = wall hanging, C = inversion formula, S = rack (when wall hanging, the S-axis motion will be limited, please note.) 2: JIS B 8432 as a benchmark. 3: depending on the application, the operation mode differs. 4: moving purposes only. 5: The operating range of more than 1kg situation is different. According to corresponding load, use correct range of motion. 6: MH6F voltage is 1.5KVA. 7: HP20F voltage is 2.0KVA. 8: The shaded area represents the range of the S-axis, when P point not movable at -40 ° ~ + 30 ° not actions.

View Complete Details

Chiller for injection Moulding Machine

Water Chillers adopt shell-shape condensers with the features of rapid heat transmission and excellent heat dispersion. This series can be afforded cooling ranges from 5~35?, even lower to 3? (temperature controlled accuracy at ±1?). The compressors’ power range from 3HP~50HP and cooling capacities range from 7800~ 128500 Kcalhr. Feature To adopt imported superb compressors and pumps to ensure safe & quiet running , power saving and durable service life. To employ microcomputer with easy operation which can control temperature within ±3? to ±5? precisely. Unique design for condenser and heat- dispersion unit result in excellent heat-exchange effect. To equip with electrical current overload protection, high & low-pressure switch, electronic timer delay safety device. It will alarm to display faulty while any malfunction occurs. To adopt with internal 304 stainless steel insulated water tank with durable service life for easy cleaning & maintenance. Complete safety devices including power reverse phase & power short phase and anti-freeze protection. Ultra low temperature type of chillers can reach below -15?. Chillers for anti-alkaline & anti-acid type can be customized.

View Complete Details

Conveyor for injection Moulding Machine

The workbench is made of PVC material which can protect the external appearance of products. Conveyor speed can be adjusted freely from 0~6mmin, operate easily and use conveniently. It adapts universal castors with brake which can fix and move easily. It is not only can realize automation to work with robot by connecting peripheral signal but also can work independently. The TBA and TBL Series adjusted aluminum alloy frame which the height can be adjusted according to requirements. Customized spec are available according to customers’special requirement.

View Complete Details

Thermoset Injection Moulding Machine

Thermoset Injection Moulding Machine Features Vertical mold clamping and injection, small footprint and high degree of precision. This Thermoset Injection Moulding Machine is ideal for injection of medium and small products with inclusions. Dual-cylinder injection system offers high injecting pressure for fast operation, making this injection machine your best choice for production of thin items. Direct-pressure mold clamp allows even injection force, and the relatively low pressure means maximum precision and an incredibly smooth cycle of operation. Choose a platen or a rotary plate in accordance with the type of products to be injected, in order to achieve the best possible in feed and injection effects. Thermoset Injection Moulding Machine offers a wide range of programmable functions including automatic inclusion, extraction and fully-automatic production. There are also many other control systems that facilitate flexible production and keep costs low while maximizing precision.

View Complete Details

Vertical Injection Moulding Machine

Vertical Injection Moulding Machine Features Dual-cylinder injection system offers high injecting pressure for fast operation, making this Vertical Injection Moulding Machine your best choice for production of thin items. Direct-pressure mold clamp allows even injection force, and the relatively low pressure means maximum precision and an incredibly smooth cycle of operation. Choose a platen or a rotary plate in accordance with the type of products to be injected, in order to achieve the best possible in feed and injection effects. This machine offers a wide range of programmable functions including automatic inclusion, extraction and fully-automatic production. There are also many other control systems that facilitate flexible production and keep costs low while maximizing precision. Vertical mold clamping and injection, small footprint and high degree of precision. This Vertical Injection Moulding Machine is ideal for injection of medium and small products with inclusions. TKC Products K2S KT KT-R KVV 1501150

View Complete Details

Ucan High Performance Injection Moulding Machine

UCAN High Performance Injection Moulding Machine Excellent design features make U CAN machinery very versatile to use high productivity, durability, and easy to maintain UCAN utilises key components from the world renowned manufacturing of Servo system, Microprocessor controller hydraulic systems electrical parts and lubrication parts The design utilise very sturdy mechanical components. Ability to process all types of Thermoplastic and Thermoset materials with wide range of Screw and Barrel for each application Machine range from 90 Ton to 1650 Ton and Immediately available range from 90Ton to 320Ton U CAN machine offers the best combination of ROI (Return of Investment) and COW (Cost of Ownership)

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Daniel Morris
  • 1450 west 7th st, United States