Detroit Flex Defense

United States

eavy Duty High Pressure hose is the most rugged construction of all; designed to perform in high shock and high vibration applications, especially where the hose may be subject to external abuse.This product is ideal for high pressure impulse and cycling such as reaction injection molding. Its resistant to hydraulic fluids, oils, acids and corrosive chemicals.Heavy Duty High Pressure hose is designed with a smooth bore conductive DuPont Type 62 PTFE liner, overbraided with multiple layers of stainless steel wire.Pressures up to 6000 PSI.Temperature: -65F to 450F. For service at 400F, maximum operating pressure for all sizes is 3, 000 PSI.Sizes : -04 to -16

The unique construction of tape wrapped convoluted hose and stainless steel braid combines the properties of PTFE with lighter weight and greater flexibility than any hose of comparable size.Other braid materials such as polyester, polypropylene, nylon, and Kynar are available for special applications.Applications: Chemical plants, food processing, pharmaceutical companies, petrochemical sites, pulp and paper processors.White non-conductive, PTFE lined, fiberglass reinforced innercore, overbraided with 300 series stainless steel wire.Conductive Black (carbon impregnated), PTFE lined, fiberglass reinforced innercore, overbraided with 300 series stainless steel.Pressures up to 1250 PSI.Temperature: -65F to 450FSizes : -04 to -32

Heavy Wall White non-conductive, PTFE lined, fiberglass reinforced innercore, spiral wire wrapped, overbraided with 300 series stainless steel wire.Heavy Wall conductive Black (carbon impregnated), PTFE lined, fiberglass reinforced innercore, spiral wire wrapped, overbraided with 300 series stainless steel wire.Full vacuum and pressures up to 750 PSI.Temperature: -65F to 450F.Sizes : -24 HV to 64 HV

White non-conductive or Carbon black conductive lined smooth bore DuPont type 62 virgin PTFE tubing, with inner and stainless steel braided design.Dramatically more flexible, smooth bore I.D., greater kink resistance, higher pressure capability.Up to 40% higher operating pressure than medium pressure smooth bore hose.A greater margin of safety, superior insulating properties, less pressure drop versus convoluted hose.Minimal volumetric expansion and length change over the full range of pressure.Longer hose life, less downtime, lower maintenance cost.Applications: Automotive, autoclaves, food processing, glue and coating, paint and chemical manufacturing and much more.Temperature: -65F to 450F.Sizes : -04 to -12

Medium Pressure Fluoro-Comp Hose Combines the outstanding properties of fiberglass and fluoropolymers to create the first fluoropolymer (PTFE lined), fiberglass-braided composite hose.The fluoropolymer (PTFE) gives the hose its chemical resistance and is therefore virtually inert to all chemicals.The combination of the fiberglass outer braid and PTFE liner, make the hose essentially non-flammable.Ultimate fuel compatibilitySignificantly lower permeation rateSuperior chemical, temperature and flame resistance.Temperature: -65F to 450F.Sizes : -04 to -16 Click Here for fittings

White non-conductive DuPont Type 62 virgin PTFE tubing, .030 tube wall, overbraided with 300 series stainless steel wire.Carbon black conductive lined, DuPont Type 62 virgin PTFE tubing, .030 tube wall, overbraided with 300 series stainless steel wire.Applications: Automotive, food processing, pharmaceutical, chemical , compressed air and petrochemical. It can be found in factories, on trucks and buses, automobiles (both on and off road), in laboratories, and in endless manufacturing situations; anywhere that the limitations of rubber, metal and synthetic hoses make PTFE hose the only solution.Pressures up to 3000 PSI.Temperature: -65F to 450F Continuous Service meets or exceeds SAE 100R14 specifications.Sizes :-03 to -24Z

Lightweight High Pressure hose is specially constructed for applications requiring strength, reliability and long term performance along with low profile and flexibility.High Pressure PTFE hose is constructed with a smooth inner tube of DuPont Type 62 PTFE, impregnated with carbon black to provide conductivity for static dissipation. The outer braid is a unique bunch braid design made with 300 series stainless steel wire.Applications: Transfer of automotive sealants, reaction injection molding machines, industrial gages, compressed natural gas and hydraulic service.Pressures up to 5000 PSI.Temperature: -65F to 450F. For service at 400F, maximum operating pressure for all sizes is 3, 000 PSI.Sizes : -04 to -24