Die Temp Engineering Services

Michigan, United States

We offer aluminum die casting machine. Ex-cell-o b&t; 900 ton cold chamber aluminum high pressure die casting machine serial number unknown, new in 1980's. This machine is an original "b&t 1000" series machine with factory proportional hydraulics and b&t servo shot system. Machine has 36-12 inches of tie bar clearance.

We are a manufacturer, exporter and wholesale supplier of B-T Aluminum Cold Chamber Die Casting Machines (900 Ton - 8810), from Michigan, United States. This machines has a new linkage and approximately 150, 000 USD worth of work has been executed on this machines.

 

The other specifications of the B-T Aluminum Cold Chamber Die Casting Machines (900 Ton - 8810) are as follows :Ex-Cell-O B&T; 900 Ton cold chamber aluminum high-pressure die casting machines serial number 8810. This machines is an original "B&T 1000" series machines with factory proportional hydraulics and B&T servo shot system. Machines has 36 of tie bar clearance. ABPLC2/30.

We are a manufacturer, exporter and wholesale supplier of B & T Aluminum Cold Chamber Die Casting Machines (900 Ton -1988), from Michigan, United States. This machines has a new linkage and approximately 150, 000 USD worth of work has been executed on this machines.

 

The specifications of the machines we have on offers are :Ex-Cell-O B&T; 900 Ton cold chamber aluminum high-pressure die casting machines serial number 8810. This machines is an original "B&T 1000" series machines with factory proportional hydraulics and B&T servo shot system. Machines has 36 of tie bar clearance. ABPLC2/30.

We are a manufacturer, exporter and wholesale supplier of B & T Zinc Die Casting Machines (550 Ton), from Michigan, United States. The Die Casting Machines that is being offered is a re-furbished machines, made in the late 1970s and re-furbished in 1998 by Apco with a PLC from Texas Instruments. It is in excellent condition, looks like new, as it has been sparingly used after re-furbishing. 

 

Specification : 27x27 between tie bars.

We are a manufacturer, exporter and wholesale supplier of B & T Aluminum Die Casting Machines (700 Ton), from Michigan, United States. We have on offer an Ex-Cell-O B&T, 700 Ton Cold Chamber Aluminum high-pressure die casting machines manufactures in 1987.  This machines is an original B&T 1000 series machines with factory proportional hydraulics and B&T servo shot system. B & T Aluminum Die Casting Machines (700 Ton) has 33 tie bar clearance.

We are offering used die casting machine. 500 ton weingarten cold chamber die casting machine. New: late 80s.refurbished in late 90s with abplc panel view.675x675 between tie bars. 440v.

50 Ton National ZInc Die Casting machine equipped with Furnace, gas fired, 440v. 12.25x12.5"s between tie bars, 15 HP Motor. Fully automatic machines with 1000 dry cycles per hours.

We are a manufacturer, exporter and wholesale supplier of B & T Zinc Die Casting Machines (600 Ton), from Michigan, United States. The B & T Zinc Die Casting Machines (600 Ton) is in average mechanical condition, manufactured in 1976.

Details

• Tie Bar centers, H x V : 36x36”s
• Tie Bar Diameter : 6.75”s
• Tie Bar Clearances : 29.25 x 29.25”s,
• Moving Platen : 51 h x53 V x 10”s thick,
• Stationary Platen : 51 x 58 x 10.75” Thick,
• Die Thickness : 15-36”s,
• Shot Cylinder Stroke : 16-24”s,
• Shot Positions : C-7.5”s below,
• Pump Motor : 75 Hp, 480/240 V,
• Moving Platen Stroke : 17”s,

Motorized Die Height, Air Safety Ratchet Bar, 3-Speed Shot, Trabon Auto Lube, T-Slotted Platens, Core Pulls, Automatic Safety Doors.
Rebuild in 1996 with Apco shot end and TI panels.

We are a manufacturer, exporter and wholesale supplier of Weingarten Aluminum Cold Chamber Die Casting Machines (500 Ton), from Michigan, United States. It has been manufactured in the late 80s and refurbished in late 90s with an AB PLC panel view. It is in a good condition as it has been sparingly used after refurbishing.

We are a manufacturer, exporter and wholesale supplier of B-T Aluminum Cold Chamber Die Casting Machines (900 Ton -1987), from Michigan, United States. Manufactures in 1987 the machines has been in use till October 2013. The specifications of the B-T Cold.

 

Chamber Die Casting Machines are :Ex-Cell-O B&T; 900 Ton cold chamber aluminum high pressure die casting machines serial number unknown, new in 1980's. This machines is an original "B&T 1000" series machines with factory proportional hydraulics and B&T servo shot system. Machines has 36 of tie bar clearance. New Motor, ABPLC2/30

We are a manufacturer, exporter and wholesale supplier of Castmaster Zinc Die Casting Machines (100 Ton), from Michigan, United States. The Castmaster Zinc Die Casting Machines that we offer is manufactured in the 1960 but lately refurbished, in a fairly good mechanical condition and the original relay panel. This is an incline bed machines with a furnace.

 

The specifications are as follows :

• Distance Between Tie Bars : 13 1/2" x 13 1/2"
• Auto Lube : No
• Tie Bar Dia. : 2 1/4"
• Ejection : Mechanical
• Min-Max Die Ht. : 5 - 18"
• Model : 30Z
• Shot Location : Center, 3" Below
• Electrical : Relay

We are a manufacturer, exporter and wholesale supplier of B & T Zinc Die Casting Machines (275 Ton), from Michigan, United States. The B & T Zinc Die Casting Machines (275 Ton) that is offered by is a refurbished machines, which was manufactured in 1976.  The machines is an average condition, was in use till 1998, has a hydraulic Nozzle Camp and Safety doors and safety ratchet.

 

The specifications are as follows :

• Distance between Bars : 19x 19
• Auto Lube : Trabon
• Tie Bar Diameter : 4
• Ejection : Mechanical
• Min-Max Die Height : 8 22
• Core Pulls : 2
• Shot Cylinder Diameter : 4 Dia, 8 Stk
• Mot Die Ht : Yes
• Shot Location : Center
• Electrical : Relay, 40HP Motor