Sawing Machine #6730136

The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell.Precision sawing.

1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.

2. NC controller and touch screen are used for easy operation and fault detection.

3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.

4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.

5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.

6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.

7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.

the machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics cards, network cards, cpu, hard disk, mp3 shell aluminum shell, u disk shell.precision sawing.

1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.

2. Nc controller and touch screen are used for easy operation and fault detection.

3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.

4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.

5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.

6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.

7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.

suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, pvc, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics cards, network cards, cpu, hard disk shell, mp3, u disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile.

1 high precision sawing, no burr, no need for secondary processing, high efficiency.

2 only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece.

3 hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise.

4 the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)

the machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, pvc, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics cards, network cards, cpu, hard disk shell, mp3, u disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile.

1. Nc controller and touch screen are used for easy operation and fault detection.

2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.

3. Automatic feeding stroke of 1400mm can feed the material to the overpass.

4. Saw blade horizontal saw cutting, suitable for wide and large material processing.

5. High precision ball screw driven by servo motor.

6. Oil production pressure push in the feeding mode, high sawing stability.

7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time.

8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved.

9. The processing machine will automatically have no material induction or can choose to set the length of the tail material.

materials may be placed side by side and overlapped.special sawing action design feeding mode :1. Feed to cover 2. Manual feeding.

High spindle rotation. Cut two 45 (one 45at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum ).

1. Double-pole synchronous saw cutting: cut two 45 (one 45at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.

2. Stamp foot switch to auto press and saw materials, which is safe and easy.

3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.

4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.

5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).

high spindle rotation. Cut two 45 (one 45at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum ).

1. Double-pole synchronous saw cutting: cut two 45 (one 45at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.

2. Stamp foot switch to auto press and saw materials, which is safe and easy.

3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.

4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.

5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).

This machine is specially developed and designed for solid aluminum bar, using independent hydraulic workstation as power, feeding, feeding and clamping are all driven by oil cylinder.The machine is set by PLC program, automatic feeding, clamping and automatic sawing.

1.Vertical slide - type advance and retreat knife, steady speed, high precision sawing.

2.Unique main clamp design, strong and firm grip;Floating feeding system, no damage to the surface of the workpiece, high feeding accuracy.

3.Sliding automatic oil lubrication, long service life.

4.Automatic circulation of coolant ensures smooth working surface and prolongs blade life.

5.Electronic sawing quantity design and quantity count

6.Automatic stop device without material.

7.Sawdust centralized treatment square completely clean.

8.Digital display device, easy length adjustment, fast and accurate.

suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, pvc, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.

1. Accurate sawing angle, high precision, smooth cutting surface without burr, high efficiency.

2. Only foot switch, automatic mechanical pressure, automatic saw material is safe and easy

3. Hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time

4. The pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)

5. Press height and speed and saw cutting height and speed can be set according to material size and thickness.

6. Precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life

7. Can do 045 degrees arbitrary angle saws, angle adjustment convenient and accurate.

suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, pvc, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.

1. Accurate sawing angle, high precision, smooth cutting surface without burr, high efficiency.

2. Only foot switch, automatic mechanical pressure, automatic saw material is safe and easy

3. Hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time

4. The pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)

5. Press height and speed and saw cutting height and speed can be set according to material size and thickness.

6. Precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life

7. Can do 045 degrees arbitrary angle saws, angle adjustment convenient and accurate.

accurate sawing angle, high precision, smooth cutting surface without burr, high efficiency.

only foot switch, automatic mechanical pressure, automatic saw material is safe and easy

hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time

the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)

press height and speed and saw cutting height and speed can be set according to material size and thickness.

precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life

can do 045 degrees arbitrary angle saws, angle adjustment convenient and accurate.

.

.

suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, pvc, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics cards, network cards, cpu, hard disk aluminum shell, mp3 shell, aluminum doors and windows, picture frames, light boxes, screen, display equipment, line type lamp, aluminum furniture, aluminum extrusion and precision cutting of different profile

.

be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, pvc profiles, plastics, pvc, bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, cpu, hard pan, mp3 aluminum case, u disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles.
1accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency.
2stamp foot switch to auto press and saw materials, which is safe and easy.
3down-to-up hidden sawing mode: high security, single or multi cutting available.
4pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing).
5be able to set pressing height and speed and cutting height and speed according to material size and thickness.
6precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade.
7045 angle cutting available. Angle adjustment is easy and accurate.

be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, pvc profiles, plastics, pvc, bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, cpu, hard pan, mp3 aluminum case, u disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles.
1accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency.
2stamp foot switch to auto press and saw materials, which is safe and easy.
3down-to-up hidden sawing mode: high security, single or multi cutting available.
4pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing).
5be able to set pressing height and speed and cutting height and speed according to material size and thickness.
6precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade.
7045 angle cutting available. Angle adjustment is easy and accurate.

• vertical track feeding and retracting: stable feeding, long tooling life and high cutting precision.


• european design, multi group gears driving and be suitable for heavy cutting and stable precision.


• cooling cycle system (water soluble cutting liquid) makes work-piece cutting surface smooth and accurate, burr-free and prolongs using life of the saw blade. Be suitable for long-time and large amount of cutting.
  
  
  90direct cutting, 90-45 left and right bias cutting available.
  
  

The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile.

1. NC controller and touch screen are used for easy operation and fault detection.

2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.

3. Automatic feeding stroke of 1400mm can feed the material to the overpass.

4. Saw blade horizontal saw cutting, suitable for wide and large material processing.

5. High precision ball screw driven by servo motor.

6. Oil production pressure push in the feeding mode, high sawing stability.

7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time.

8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved.

9. The processing machine will automatically have no material induction or can choose to set the length of the tail material.

Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding.