Industrial Valves #5145534

V27200 2-Way Normally Shut-Off Solenoid ValveV27200 2-Way Normally Shut-Off Solenoid ValveDescriptionSeries 27200-Miniaturized are direct acting coaxial, poppet solenoid shut-off solenoid valves. They are miniaturized versions of series 27200. They are extremely compact (0.97 dia. x 2.063 long) and lightweight. The compactness is achieved by using the solenoid plunger to carry the valve poppet seal. Series 27200-Miniaturized valves employ a simple construction containing only one moving part. Each valve consists of a ported solenoid and an orifice in the seat. Ports are in-line along the solenoid axis.ApplicationsSeries 27200-Miniaturized valves are applicable to all commonly used non-corrosive fluids and gases. They are extensively used for missile and satellite applications where size and weight limitations are critical.Features2-Way Shut-OffPoppet Design14 OD LineConfiguration: Normally Closed, Normally OpenTemperature: -65F to +450FPressure Range: 0-1500 PSIG MaximumProof Pressure: 2250 PSIGBurst Pressure: 3000 PSIGWeight: 0.22 lbs (approx.)Electrical DataVoltage: 18 to 30 VDCDuty: ContinuousCurrent: 0.65 amps max. at 30 VDC and at 70FOther Available Coils: Coils can be made with higher or lower resistance, specifically 80 or 32 ohms. A 32 OHM coil would berated intermittent, but the valve pressur rating could be increased by as much as 25%. An 80 OHM coil will reduce the current draw, but will also reduce the pressure rating by as much as 25%.Electrical Connector: Pigtail leads (36 long) made of #22 or #24 wire to MIL-W-1687A Type EE are standard. MS receptacles mounted on the solenoid shell can be provided.

V4700 2-Way Normally Open or Normally Closed Shut-Off Solenoid ValveV4700 Shut-Off Solenoid ValveDescriptionSeries 4700 are direct acting, solenoid shut-off valves. They permit flow to be shut off in either direction and allow either of the two ports to be used as the pressure port. Series 4700 valves are extremely reliable because their simple construction contains only two moving parts. They are lightweight and compact. Valve shut-off is accomplished by use of Valcors Floating Seal Principle. This utilizes an optically flat seat disc against an equally flat seat. The gate-type action actually wipes the seat clean with each valve operation. The wiping action virtually keeps the valve from being affected by contaminants.ApplicationsSeries 4700 valves are designed for use with most common non-corrosive fluids and gases. They are widely used in many current aircraft fuel systems. The series is particularly suitable for low pressure drop requirements and contaminated liquid systems.Features2-way Shut-OffGate-Type DesignFloating Seal38 O.D. LineConfigurations: Normally ClosedNormally OpenTemperature: -65F to +165F (Standard Static Seals)-65F to +450F (Special Static Seals)Pressure range: 0-1200 PSIG MaximumProof pressure: 1500 PSIGBursting pressure: 3000 PSIGWeight: 0.44 lbs (approx.)ElectricalVoltage: 18 to 30 VDCDuty: 30 OHM Coil, Continuous or Intermittent, 47 OHM Coil, Continuous, (Depends on application, cooling effect of fluid, etc.)Current: At 30 VDC and at 72F 1.07 amps max., for 30 OHM Coil 0.68 amps max., for 40 OHM CoilElectrical Connector: MS 3102A-10SL-4P is standard. Other types are available. Receptacle location can be on top or side of the solenoid. For other options, contact your Valcor Engineering representative.

V14500 2-Way Direct Acting Solenoid ValveV14500 2-Way Direct Acting Solenoid ValveDescriptionSeries V14500 are direct acting, solenoid shut-off valves with inline porting. They are 2-way valves which seal tight, with flow andor pressure possible in either direction. The flow path is straight through type rather than circuitous. Series 14500 valves are extremely reliable because their simple construction employs only two moving parts. They are lightweight and compact. Valve shut-off is accomplished by use of Valcors Floating Seal Principle. This utilizes an optically flat seal disc against an equally flat seat. The gate-type action actually wipes the seat clean with each valve operation and virtually keeps the valve from being affected by contaminants.Features2-way Shut-OffGate-Type DesignFloating Seal12 O.D. LineConfigurations: Normally Closed, Normally OpenTemperature: -65F to +165F (Standard Static Seals), -65F to +450F (Special Static Seals)Pressure range: 0-1000 PSIG MaximumProof pressure: 1500 PSIGBurst pressure: 3000 PSIG MinimumWeight: 1.25 lbs (approx.)Electrical DataVoltage: 18 to 30 VDCDuty: 19 OHM Coil, Continuous or Intermittent, 30 OHM Coil, Continuous (Depends on application, cooling effect of fluid, etc.)Current: At 30 VDC and at 72F 1.07 amps max., for 19 OHM Coil 1.07 amps max., for 30 OHM CoilElectrical Connector: MS 3102A-10SL-4P is standard. Receptacle location can be on top or side of the solenoid. For other options, contact your Valcor representativeApplicationsSeries V14500 valves are applicable to all commonly used non-corrosive fluids and gases. They are widely used in many current aircraft fuel systems. Military Specifications MIL-F-8615 and MIL-V-8610 are applicable to these valves.