Computer Input Devices #5146410

Rack Mount Keyboard from EKI EKI Rack mount keyboard Made in the USA is very versatile and can be mounted on a rack, from behind a rack or directly on equipment for factory floor, machine and process control and the automation industry. Rackmount keyboard can have PS2, USB, RS-232 or RS-422 outputs, and used with kvm, video monitors.83 PPKB-SA-064 (standalone keyboard) is in quantity one, wTouch Pad. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The key text area is 3.75 inches (95mm) by 9.75 inches(247mm). Click to see -064 key pattern. With numbers on the right -050 (click to see -050 key pattern) With touch pad -037 (click to see -037 key pattern) With touch pad and numbers on the right -065 (click to see -065 key pattern) 1u Standalone Keyboard EKI manufactures optical rackmount keyboard where the finger is detected by a matrix of infrared sensors with drift free technology so they can be used outside, desk top or the factory floor. There are no nooks and crannies around keys so they can be just washed off if something is spilled on them. As standard they can be either completely silent or have an audible response.Rugged rackmount keyboard that will not wear out, rated at 30, 000, 000 touches per year. EKI's keyboard detects your finger optically so there are no moving parts, and no domes to crack. these are not membrane or mechanical switch keyboards, you can stick a knife in the touch surface and not affect the life or operation. Keyboard can have permanent, semi-permanent key text overlays. Industrial keyboard that can IO dual ascii (rs-232 or rs-422), USB or PS2 codes and sequences of codes. They are sealed so they can be easily washed off. EKI can make our custom keyboards and keypads fit your application. With our keyboards that use PS2 output, there is no other connections required. Our keyboards are also compact in size so they can be used on your lap, stand, or desk. We have models that can be mounted to a panel or machine. They can be fitted with a touch pad to one side, or in the middle of the keyboard.And because they're optical we can make them to fit your application. You can have only the keys you want, your name, your colors, your organization's name, your department, and text (a function name). And Hot Keys, one key can input a URL, ctrl-C, etc., so if you're using a program that you press a sequence of keys on a regular basis, those sequences can be programmed into one key with the function name put on the key position. Because there are no moving parts they will never wear out. We also make them in any language. You send us the keys you want and we'll send you a keyboard.

83 PKB-SA-Black (standalone or desk top industrial keyboard) -W (white bezel, as shown) -B (black bezel) -G (gray bezel) is in quantity one, wTouch Pad. The backlite option is which costs extra. The cable plugs into the PS2 port. The keyboard is shown with one of many overlay styles that EKI custom makes to fit a customers application. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick.

83 PPKB-SA-N4-Black (standalone industrial keyboard) is in quantity one. This industrial sealed keyboard is sealed to NEMA 4 standalone industrial keyboard just sits on a table or piece of equipment and is sealed to NEMA 4. The backlite option costs extra. The cable plugs into the PS2 port and is permanently attached to the keyboard. The keyboard is shown with one of many overlay styles that EKI custom makes with charge to fit a customers application. The keyboard is 12.50 inches (317mm) wide, and 6.25 inches (159mm) deep, and 1.50 inch (38mm) thick at the rear. The keyboard above can be fitted with the optional Cirque touch panel as shown below in the SAMPLE key overlay patterns for an extra charge. The keyboard is mounted to an angled mount that can be removed allowing the keyboard to be mounted directly to a surface.

Field Programmable Industrial Sealed Keyboard sealed to NEMA 4 Surface Mounted Industrial Keyboard ONLY.83 PPKB-SM-Black NEMA 4 (surface mount industrial keyboard) -W (white bezel, as shown) -B (black bezel) -G (gray bezel) is in quantity one, wTouch Pad. The 83 PKB-SM is a surface mount keyboard that mounts on top of a customers panel, when mounted it is sealed. The gasket is included with the keyboard. The backlite option is an extra charge. The cable plugs into the PS2 port and to the keyboard. The keyboard is shown with one of many overlay styles that EKI custom makes to fit a customers application. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. There are 8 mounting holes that have 8-32 threads. The keyboard above can be fitted with the optional Cirque touch panel as shown above in the sample key overlay patterns.

83 PPKB-FM NEMA 4 (flush mount keyboard) or-FMT (flush mount wthreads) is in quantity one, wTouch Pad. The 83 PKB-FM is a flush mount keyboard that mounts from the rear through a customers panel, when mounted it is sealed. The backlite option is an extra charge. The gasket is included with the keyboard. The cable plugs into the PS2 port and to the keyboard. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The key text area is 3.75 inches (95mm) by 9.75 inches(247mm). In the -FM there are eight mounting holes .169 inches in diameter to fit over 4-40 standoffs, the standoff part number is PEM BSO-440-10, they can be purchased from Penn Engineering. In the -FMT there are eight mounting holes with 8-32 threads for mounting with the heads exposed, click on "Mounting" for a drawing to show the screw position.