Florida, United States
Verified
Write a Review
Our Products
CHROME ORE,IRON ORE, TUNGSTEN ORES,TIN ORE,TANTALITE ORE, BERYLLIUM ORE,COPPER SLUDGE,ZINC DUST,ZINC POWDER, MAGNESIA CARBON BRICKS, PYRITE ORE,COLTAN/TANTALITE ORE,
- All weather cold mix pavement repair materials. - Use for pot holes / road craks patching, joint section of bridges, uneven road levels, and cable laying. - Easy to apply (cold-applied) and do not need to apply tack coat prior patching. - No compactor required (utilize rolling pressure from passing vehicles). - Binding strength increases overtime. - Immediately open to traffic after application even under heavy traffic conditions.
| Place of Origin | Malaysia |
| Brand Name | MAMI |
| Type | Asphalt Cold Mix |
| Grade | Cold Mix PnG |
| Weight | 25kg |
Additional Information:
Payment Terms : L/C, D/A, D/P
Packaging Details : 25kg Bags
Delivery Time : 5 DAYS MAX
Silicon calcium manganese has strong ability to deoxidize, desulfurize and remove inclusions, and has low melting point, fast melting speed and good fluidity, which can effectively shorten refining time and reduce refining power consumption. In addition,
Silicon calcium manganese has strong deoxidation, desulfurization and removal of inclusions, low melting point, fast melting speed and good fluidity, which can effectively shorten the refining time and reduce the refining power consumption. In addition, there is no smoke, no flame, good safety and environmental performance in use. It is suitable for deoxidation of various steelmaking forms, especially suitable for converter steelmaking deoxidation, 3--5KG per ton of steel. Strong deoxidation and desulfurization ability, effectively improve the fluidity of molten steel, purify molten steel, reduce impurities in steel, and greatly reduce steelmaking costs , Improve economic efficiency
II.Specifications
| Elements | Si | Ca | Mn | S | P | C |
| Percentage | 13 | 10 | 18 | 0.4 | 0.25 | 0.1 |
III.Application:
Silicon calcium manganese is used for all steel grades of ordinary steel, low carbon steel, wire drawing steel and stainless steel
IV.Product advantages:
Silicon calcium manganese has strong ability to deoxidize, desulfurize and remove inclusions, and has low melting point, fast melting speed and good fluidity, which can effectively shorten refining time and reduce refining power consumption. In addition, there is no dust, no flame, good safety and environmental performance in use. It is suitable for deoxidation of various forms of steelmaking, especially for converter steelmaking deoxidation, 3--5KG per ton of steel. Strong deoxidation and desulfurization ability, effectively improve the fluidity of molten steel, purify molten steel, reduce impurities in steel, and greatly reduce steelmaking costs.
The molten steel is deeply deoxidized. It is an aluminum-based technology deoxidizer developed and produced without adding silicon or nitrogen to the molten steel of steel mills. Absorbs the inclusions in the steel, obviously improves the fluidity of the molten steel, and solves the flocculation and the subcutaneous pores of the billet in the continuous casting.
Package: (1)25Kg/bag, 1MT/bag (2) according to client's requirements
Size: 0-10mm, 10-100mm or as clients requirement
Payment term: T/T OR L/C
Delivery time: Within 10 days after receiving prepayment
Service:
We can supply you free samples, booklet, laboratory test report, Industry Report etc
Welcome to our factory and company for a visit
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : As buyers requirements
Delivery Time : 7 to 10 Days
Silicon Metal lump was produced in electric heating furnace by quartz and coke. Quartz will be redox and became molten silicon
liquid. After cooling, it will be solid as we see. The primal silicon metal lump is very large. Then it will be made into smaller
lumps which we call standard size. Silicon Metal Lumps will be 10-100mm. Typical models includes: Silicon Metal 2202; Silicon
Metal 3303; Silicon Metal 441; Silicon Metal 553, Silicon Metal Off Grade.
| rade | (Chemical Composition) % | |||
| Si | Impurity | |||
| Fe | Al | Ca | ||
| Silicon Metal 2202 | 99.5 | 0.2 | 0.2 | 0.02 |
| Silicon Metal 3303 | 99.3 | 0.3 | 0.3 | 0.03 |
| Silicon Metal 441 | 99.0 | 0.4 | 0.4 | 0.1 |
| Silicon Metal 421 | 99.0 | 0.4 | 0.2 | 0.1 |
| Silicon Metal 553 | 98.5 | 0.5 | 0.5 | 0.3 |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : As buyers requirements
Delivery Time : 7 to 10 Days
The blast furnace stemming is used to block the taphole. When the blast furnace does not produce liquid iron slag, stemming filled in the iron mouth, the iron mouth maintain a certain depth. When blast furnace produce iron, some channels are drilled out .
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : As buyers requirements
Delivery Time : 7 to 10 Days
Atomised ferro silicon 45% is manufactured by melting fesi 75% ferrosilicon with premium scrap steel in an induction furnace. The melt is then blown into small particles by high pressure water jetting system. It is then dried and sieved into different gra
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : As buyers requirements
Delivery Time : 7 to 10 Days
Customers can avail from us Graphite Powder. In this line of products we also offer Graphite Powder Coarse -22 Mesh, Graphite Powder -60 Mesh, Graphite Powder (Granules) 0.5mm to 5mm, Graphite Powder -300 Mesh, Graphite Powder -200 Mesh and Graphite Chip
| Product | Fixed Carbon | Sulphur | Volatile Matter | Sizes Available |
| Graphite Powder | 98 - 99.5% min | 0.03-0.05% max | 0.5% max | - 60 mesh to Infinity |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : As buyers requirements
Delivery Time : 7 to 10 Days
Calcium silicon alloy is a compound alloy made up of elements silicon, calcium, and iron, is an ideal compound deoxidizer, desulfurization agent.
Brand Name:Star
Model Number:6030/6028/5520/5516
Chemical Composition:Ca Si C Al P S
Supply Ability:3000 Metric Tons per month
Min Order Quantity:20 Metric Ton
Description
Calcium silicon alloy is a compound alloy made up of elements silicon, calcium, and iron, is an ideal compound deoxidizer, desulfurization agent.
At present calcium alloy can be used instead of aluminum for final deoxidation, is applied to high-quality steel, special steel and special alloys production. Such as rail and low carbon steel, stainless steel, steel and nickel base alloy, titanium alloy and other special alloy.
Specification:
| Brand | Chemical Composition(%) | |||||
| Ca | Si | C | Al | P | S | |
| Ca31Si60 | 31 | 55-65 | 1.0 | 2.4 | 0.04 | 0.06 |
| Ca28Si60 | 28 | 55-65 | 1.0 | 2.4 | 0.04 | 0.06 |
| Ca24Si60 | 24 | 55-65 | 1.0 | 2.5 | 0.04 | 0.04 |
| Ca20Si55 | 20 | 50-60 | 1.0 | 2.5 | 0.04 | 0.04 |
| Ca16Si55 | 16 | 50-60 | 1.0 | 2.5 | 0.04 | 0.04 |
Size:0-10mm, 10-100mm or as clients requirement
Packing:(1)25Kg/bag, 1MT/bag (2) according to client's requirements
Payment term:T/T OR L/C
Delivery time:Within 10 days after receiving the prepayment.
Service:We can supply you free samples, booklet, laboratory test report, Industry Report etc
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : As buyers requirements
Delivery Time : 7 to 10 Days
Calcined petroleum coke, calcined petroleum coke manufacturer , calcined petroleum coke suppliers is a kind a petrochemical product, whose raw material is green petroleum coke.
Brand Name:Star
Model Number:T9805 T9850 T9530 T9030 T8520
Chemical Composition:C S
Supply Ability:3000 Metric Tons per month
Min Order Quantity:20 Metric Ton
Description
Calcined petroleum coke, calcined petroleum coke manufacturer , calcined petroleum coke suppliers is a kind a petrochemical product, whose raw material is green petroleum coke.
The Chemical Composition of the Calcined Petroluem Coke
| NO. | Fixed Carbon | Sulphur | Moisture | Volatile | Graininess | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| >= |
Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days 1.Si Briquette will be to reduce the cost instead of FeSi Lump.It is ferro silicon substitution. 2.Si Briquette has better performance&more reasonable price than FeSi Lump. 3.Cost-saving by 20% . Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days High carbon silicon is a new compound alloy deoxidizer, which can replace the traditional deoxidizer which is more expensive, Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days Silicon Metal factory supply silicon metal 551, 441, 411, 3303. Silicon metal, metal silicon, silicon metal lump is Used in electro, metallurgy and chemical industry. Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days The information of the ferro chrome nitride Ferro Chrome Nitirde is widly used in the refining of stainless steel , corrosion resistance steel , alloy stee Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days Black Silicon Carbide is made by a precision water classification process and air flow classification using material that is produced from the reaction between high purity silica sand and petroleum coke in a resistance-type furnace. Measuring 9.0+ on th Brand Name:Star Black Silicon Carbideis made by a precision water classification process and air flow classification using material thatis produced from the reaction between high purity silica sand and petroleum coke in a resistance-type furnace. Measuring 9.0+ on the MOHS scale of hardness, silicon carbideis one of the hardest abrasives known in the industry. The inherent friability of the sharp crystalline structure assures the continuous exposure of new cutting edges, which producesa faster and cleaner cutting performance. Greensiliconcarbideisproducedasthesametypeastheblacksiliconcarbide, exceptthedifferentrawmaterials. Itscrystallizationhavehigherpurityandhardness. Greensiliconcarbideissuitableforprocessinghardalloy, metallicandnon-metallicmaterialwithhardandbrittlefeaturesuchascopper, brass, aluminum, magnesium, jewel, opticalglass, ceramics, etc. Supermicro-powerofitisalsoakindofceramicsmaterial. Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days It is mainly used in the manufacture of steel and cast iron and produce fine quality steel. Ferro Silicon is used to remove oxygen from steel for better quality and durability. Our clients also use Ferro Silicon to manufacture pre-alloys like Magnesium Fe We are industrys leading manufacture and producer ofFerro Silicon. It is seen that stainless sector is one of the fastest growing categories in the steel industry and thus Ferro Silicon comes into the picture. Stainless steel requires Ferro Silico compared to regular carbon steel. It is mainly used in the manufacture of steel and cast iron and produce fine quality steel. Ferro Silicon is used to remove oxygen from steel for better quality and durability. Our clients also use Ferro Silicon to manufacture pre-alloys like Magnesium Ferro Silicon (FeSiMg). It is used to modify melted malleable iron. Ferro Silicon is made available in different composition as per the requirements of the clients. It may be low Al, High Purity or low C Ferro Silicon. It is used in the production of special steel qualities and better durability. Our special grades of Ferro Silicon help to keep both the content of inclusions and the carbon content in the final steel at low levels. Ferro Silicon is used as raw material high-purity quartz, charcoal and iron ore in the production of arc furnaces. Pre-shipment Inspection Service is the 3rd Party Inspection available with us. SGS or equivalent at seller cost at port of loading. Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days The advantage of the slag-blocking ball The use effect of the slag retaining ball can be evaluated by observing the shape of the steel nozzle. When the slag is good, the steel water should be in a circular flow.In addition, it can be judged by the color of the lower slag.The action of the grooves in the trap is to prevent the slag from flowing out of the steel.The effect of the slag retaining ball can be evaluated by the thickness of the slag layer in the ladle, the energy saving block ball and the alloy yield.The slag layer thickness is small, the slag ball is blocked, the alloy is high, the slag ball is used in steelmaking, and the slag is good.If you have any questions, or if you need anything, you can call us at any time.We will do everything we can to help you. For many years, high quality slag ball, domestic and international numerous metallurgical workers to research and development will be very low amount of steel slag into the technology and method, in addition to the less slag, slag smelting process, mainly developed various slag technology and products, to minimize the converter steel late eddy current out of the amount of steel slag.Such as slag, slag stopper, skateboard, pneumatic slag, the tapping hole blow air disturbance vortex method, both outflow slag, tundish, the steel plate cutting slag, slag cap, slag cover, vacuum residue, siphon tapping method, etc. Steel: effectively prevents the water from returning to the phosphorus and returning the sulfur.Take effective when the converter steel slag operation, is an important way to improve the quality of molten steel, can not only reduce molten steel returning the phosphorus, sulfur, improve the alloy yield, reducing inclusions in molten steel, improving steel cleanliness, but also create conditions for further refining.Reduce deoxidizer and alloy consumption.Take effective when the converter steel slag operation, not only can reduce deoxidizing agent and alloy consumption, reduce the ladle slag viscosity, prolong the service life of the ladle, it can improve the service life of refractory material of converter tapping hole area, reduce the production cost of steel products. The converter slag ball is a spherical structure with grooves, which can effectively reduce slag in the ladle and increase the metal yield.And the rate of the investment is higher than that of the same type of products.The scum ball is a conical plug with grooves made of mechanical equipment, which can strictly control the amount of slag in the process of steel converter.The series products have the characteristics of high refractoriness, high strength and high thermal shock stability. Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days Electrolytic manganese flake Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days The main functions of manganese ingots in steelmaking are deoxidation, desulfurization and alloying elements. BrandName:Star Applications: The main functions of manganese ingots in steelmaking are deoxidation, desulfurization and alloying elements. (1) Used as a deoxidizer Steel has strict requirements on oxygen content, generally not more than 0.02%, or even more stringent. Therefore, excess oxygen is removed during the steelmaking process. Manganese is a kind of active metal, and its chemical properties are more active than iron. When manganese is added to molten steel, manganese will react with ferrous oxide to form oxidized slag that is insoluble in molten steel, and the oxidized slag floats on the surface of molten steel to reduce the oxygen content in the steel. (2) Used as desulfurizer Sulfur is present in molten steel in the form of iron sulfide. High sulfur content in steel is prone to hot embrittlement and reduces the mechanical properties of steel. Therefore, the sulfur content should be controlled in the steelmaking process. The binding force of manganese and sulfur is greater than that of iron and sulfur. After adding manganese alloy, high melting point manganese sulfide is easily generated together with manganese in molten steel and converted into slag, thereby reducing the sulfur content in steel and improving the forgeability and rollability of steel. (3) As an alloying element Manganese can strengthen ferrite and refine pearlite, improve the strength, hardenability, hardness and wear resistance of steel, so it can become an important alloying element of various steels. For example, if 0.8%-1.7% manganese is added to low-alloy steel, the strength of the steel can be increased by 20%-30% compared to ordinary carbon steel. Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days M-1 110c*24h Additional Information: Payment Terms :
L/C, D/A, D/P, T/T, Western Union Packaging Details : As buyers requirements Delivery Time : 7 to 10 Days currently, the most common source of copper ore is the mineral chalcopyrite (cufes2), which accounts for about 50% of copper production. the focus of this article is on the process of copper extraction from chalcopyrite ore into pure metal. processes for other minerals are mentioned. Additional Information: Payment Terms :
T/T, Western Union, , Packaging Details : 1000kg big pp bag or as you desire Delivery Time : 18 Days Additional Information: Payment Terms :
T/T, Western Union, , Packaging Details : 100kg bag Delivery Time : 18 Days | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
