Our Products

Marble & Stone Handicrafts
1 Products available
- Tie CB/LCB Column Bases
Ties
1 Products available
- LTT/HTT Tension Ties
Screws
1 Products available
- HG Steelbinder Screws
Corrosion And Rust Control Products
1 Products available
- Zinc Dichromate Coating
Wires
1 Products available
- Smooth Shank Wire
Bolts
1 Products available
- Steel Joint Connector Bolt
Others Products 4 Products available

Our Products

Our product range contains a wide range of Tie A Angles, EPB Elevated Post Bases, Tie RPBZ Retrofit Post Bases and Tie BC/BCS Post Caps

Tie A Angles

Width 1 (W1) 2
Width 2 (W2) 1-1/2
Length (L) 1-3/8

Simpson Strong-Tie A angles provide a way to make a wide range of 90 degree connections. The Strong-Tie A21 angle features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

View Complete Details

Ask Latest Price & Details

EPB Elevated Post Bases

Width (W) 3-9/16
Length (L) 3-1/4
Height (H) 2-5/16

The Strong-Tie EPB elevated post bases are designed to allow a 1" to 2-12" clearance above concrete. The Strong-Tie EPB44HDG elevated post base features a hot-dip galvanized coating. The minimum average coating weight is 2.0 oz.ft2 (per ASTM A123 total both sides). This product requires hot-dip galvanized fasteners (fasteners which meet the specifications of ASTM A153).Allows 1" to 2-12" clearance above concrete.Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).

View Complete Details

Ask Latest Price & Details

Tie CB/LCB Column Bases

Column Size 4x4
Width 1 (W1) 3-9/16
Finish Galvanized

Simpson Strong-Tie CB Column bases are a sturdy cast-in place anchor that are designed for heavy duty column loads. The Strong-Tie CB44 features a standard G90 galvanized coating for added corrosion resistance.For full loads, minimum side cover required is 3" for CB, 2" for LCB.Install all models with bottom of base plate flush with concrete.Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).

View Complete Details

Ask Latest Price & Details

LTT/HTT Tension Ties

Width (W) 2-1/2
Length (L) 12-3/8
Seat Thickness 7/16

The HTT4 is part of the latest generation of tension ties that offer higher load ratings than their predecessors and designed to meet new code standards. The Strong-Tie HTT4 tension tie features a standard G90 galvanized coating for added corrosion resistance.

View Complete Details

Ask Latest Price & Details

HG Steelbinder Screws

Length 1-1/4
Material Steel
Style Metal To Metal
Point Type Drill Point

Sealtite HG Steelbinder screws are self-drilling pole barn screws designed to attach metal roof and sidewall panels to heavy gauge steel on pre-engineered metal buildings. Coated screws feature a tough 2.5 mils of powder coating that will not chalk or fade due to the UV inhibitor in all colored coatings. Fastener lengths over 1-14? are designed to penetrate steel thickness up to .500. Thread to point ratio engineered to provide maximum pullout strength in heavy gauge steel. EPDM rubber is vulcanized to steel washer. Moisture has no place to penetrate. The washer provides a secure seal even when driven at an angle. Applications include metal deck to structural steel or bar joists, & retrofit clips to structural steel.

View Complete Details

Ask Latest Price & Details

Zinc Dichromate Coating

Length 1-15/16
Screw Size 8
Drive Type 3 Square

Simpson PPSD Sheathing to CFS Screws are commonly used to fasten subfloorsheathing to cold-formed steel. Coated with Yellow-Zinc Dichromate, also comes in the Quik guard coating.

View Complete Details

Ask Latest Price & Details

Smooth Shank Wire

Length 1
Diameter 0.12
Material Steel
Shank Style Smooth Shank

Grip-Rite electrogalvanized smooth shank coil roofing nails are designed to quickly and reliably install shingles to roofs with power nailers. These nails come in 15 degree wire welded coils which are compatible with most 15 degree power roofing nailers.

View Complete Details

Ask Latest Price & Details

Steel Joint Connector Bolt

Diameter 1/4"-20
Length 3.94" (100mm)
Finish Antique Bronze
Style Connector Bolt

Use Joint connector bolts to create a strong right angle joint when assembling wood panels. Joint connectors are knock down fasteners that provide a very clean finish and make for very quick and easy disassembly and re-assembly.

View Complete Details

Ask Latest Price & Details

Tie RPBZ Retrofit Post Bases

Width (W) 2-1/2
Height (H) 5
Base Flange Width (B) 1-1/2

The Simpson Strong-Tie RPBZ Retrofit Post Base is designed to reinforce existing posts and columns. The single, versatile model will fit on any size post consisting of a double 2x4 or larger. RPBZ can also be used to reinforce new post-base connections, such as braced carports, patio covers, decks and other structures. The RPBZ can be installed with the CPS composite plastic standoff to meet a 1" post standoff code requirement. A single RPBZ can be installed on a post that is flush to a corner, and two RPBZs can be installed at away from edge conditions to fortify the post base connection to resist both wind and seismic forces. . The Strong-Tie RPBZ post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

View Complete Details

Ask Latest Price & Details

Tie BC/BCS Post Caps

Width 1 (W1) 3-9/16
Length 1 (L1) 2-7/8
Height 1 (H1) 3

The Strong-Tie BC series offers dual purpose post capbase for light cap or base connections. The BC4Z post cap is approved to be installed with the specified nails or Strong-Drive SD connector screws. The Strong-Tie BC4Z post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.Use all specified fasteners.Do not install bolts into pilot holesBC: install with 16d commons or 16dx2 12" joist hanger nails.Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).To tie multiple 2x members together, the Designer must determine the fasteners required to join members to act as one unit without splitting the wood.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back