Post Your Requirement Menu

Welcome User

Other Products / Services

Our Complete range of products are Journaled Shafts, Short Length Magazine Feeders, Tub Dumpers, Hoppers for Centerless Grinders and Random Loaded Hoppers.

Hopper Feeders

  • Model 2400/2500/2600/2700

Model 2400250026002700 Hopper Feeders are designed specifically to automatically feed random loaded sliding, rolling headed or hanging parts with diameter ranges within a 2:1 ratio. Parts are elevated and gravity fed into chutes with various orienting devices designed to provide a continuous flow of product. These feeders may be used to feed all types of grinders, presses, machining equipment, and specialty machines, including forging equipment.

View Complete Details

Hopper Feeders

  • Model 2400-2700

Model 2400-2700 Series Hopper Feeders — Feedall designs and manufactures a complete line of hopper feeders which offer automatic handling of sliding, rolling or headed parts. The automatic hopper feeders are used with all types of grinders, presses, machining equipment and special machines. The automatic feeding process is proven to be more cost effective by eliminating expensive hand labor of feeding and saving time lost by handling parts manually.

View Complete Details

Wall Tube Feeders

  • Model 2300

Model 2300 Elevating Hopper Feeder — Feedall designs and manufactures a complete line of hopper feeders which offer automatic handling of sliding, rolling or headed parts. The automatic hopper feeders are used with all types of grinders, presses, machining equipment and special machines. The automatic feeding process is proven to be more cost effective by eliminating expensive hand labor of feeding and saving time lost by handling parts manually.

View Complete Details

Magazine Feeders

  • Model 1700
  • diameters 1/4”–2”Ø x 4”–28

Model 1700 Magazine Style Automatic Bar Feeders can handle part diameters from 14”–2”Ø x 4”–28” long. Our heavy duty magazines can handle up to 4”Ø and 12’ long bars. Feedall’s magazine feeders can be used in a wide variety of applications from feeding centerless grinders to a robot loaded cell above!

View Complete Details

Magazine Feeders for Induction Heating

  • Model 1700/2400-3000

Model 17002400-3000 Series Feeders for Forging — Feedall designs and manufactures a complete line of hopper and bar feeders specifically for forging applications. Our feeders automate billet heating equipment and direct press cold forging applications. Capacity of a forging feeder ranges from 34” to 6”, with the ability to feed a wide variety of shapes.

View Complete Details

Journaled Shafts

  • Model 1700

Model 1700 Automatic Bar Feeders — The Feedall line of automatic bar feeders offer the capabilities to automatically feed bar or tube stock to centerless grinders, thread rollers, induction heating equipment, polishing machines and other special processing operations. Each bar feeder begins with a standard design which we customize to your specific needs. Feedall automatic bar feeders are the most versatile and widely capable quality feeders.

View Complete Details

Short Length Magazine Feeders

  • Model 1700

Model 1700 Automatic Bar Feeders — The Feedall line of automatic bar feeders offer the capabilities to automatically feed bar or tube stock to centerless grinders, thread rollers, induction heating equipment, polishing machines and other special processing operations. Each bar feeder begins with a standard design which we customize to your specific needs. Feedall automatic bar feeders are the most versatile and widely capable quality feeders.

View Complete Details

Tub Dumpers

  • sizes 10,000 pound

Parts dumpers can be directly integrated with Feedall elevating or hopper feeders or can stand alone feeding loading tables or vibratory bowls. We offer 180º roll-over tub dumpers or hydraulic floor loaded tub dumpers. These dumpers can be loaded with a tow lift or a hand truck from the front or side. Feedall has successfully delivered tub dumpers of all shapes and sizes up to a 10, 000 pound capacity. Metering hoppers can work independently or can be directly integrated with Feedall hopper feeders. This unit will meter parts onto loading tables, vibratory bowls, conveyor systems, etc. We supply 3000 and 6000lb metering hoppers with capacity up to 40 cubic feet. Metering hoppers add to the life of your Feedall parts feeder; all the violence from dumping parts is removed from your orienting parts feeder and placed onto the metering hopper.

View Complete Details

Hoppers for Centerless Grinders

  • Model 3000

Model 3000 Hopper Feeders for Centerless Grinders can handle a wide range of part sizes and shapes that require O.D. grinding. These Feedalls can be designed to use dump stands, dumpers and metering hoppers to add capacity and auto load your centerless grinder making loading no problem.

View Complete Details

Random Loaded Hoppers

  • Model 2000

Model 2000 Random Loaded Hopper handles many different sizes and shapes that need to be O.D. ground. Loading is no problem. These feeders can be designed to use dump stands, dumpers and metering hoppers to add capacity and auto load your Feedall.

View Complete Details

Auto Loaded Billet Feeders

  • Model 2236

Model 2236 Auto Load Billet Feeder for Long Bars can handle billets up to 4” in diameter and lengths up to 30” long. Loading is no problem. These feeders are designed to use a standard drop bottom tub to auto load your Feedall. Our billet feed systems can handle all kinds of different sizes and shapes. There is essentially no part recirculation or fall back with this type of feed system.

View Complete Details

Manual Load Billet Feeder

  • Model 2224

Model 2224 Manual Load Billet Feeder for Long Bars can handle billets up to 4” in diameter and lengths up to 30” long. Loading is no problem. These Feedalls are designed with easy access doors to utilize ergonomic load heights. Our billet feed systems can handle parts of different sizes and shapes. There is essentially no part recirculation and or fall back with this type of feed system.

View Complete Details

Random Loaded Billet Feeder

  • Model 4800

Model 4800 Random Load Billet Feeder can handle billets up to 6” in diameter and lengths up to 30” long. Feedall can provide a hydraulic tub dumper or a motorized 180º roll-over dumper so loading parts is no problem. Our billet feed system can handle a wide variety of part sizes and shapes. There is essentially no part recirculation or fall back with this type of feeder. Feedall can provides a metering hopper that takes all the initial impact of a full dump, increasing the life of the feed system.

View Complete Details

Centerless Grinding Conveyors

  • Model 1650

Model 1650 Conveyors for Centerless Grinding can handle a variety of sizes and shapes that require O.D. grinding. Loading is no problem. These Feedall’s can be designed to use load ramps, hopper feeders, dumpers and metering hoppers to add capacity and auto load your Feedall.

View Complete Details

Dual Lane Orienting Conveyor

  • Model 1500

Model 1500 Dual Lane Orienting Conveyors are designed for gentlenon-mar orienting and non-orienting parts feeding. This feeder is easily adjusted for various part size ranges. Part shapes may be disc, ring, cylindrical, shaft type, solid or tubular. Parts are loaded from tote pans, bulk floor metering hoppers or by conveyors from a previous operation. These conveyors may be used to feed grinders, selective induction hardeners, thread rollers, forging and extrusion presses, assembly machines and many other parts feeding applications.

View Complete Details

Dual Round Belt Conveyors

  • Model 1680

Model 1680 Dual Round Belt Conveyors are ideal for feeding, transferring and removing cylindrical parts from machinery in an oriented fashion. They are extremely flexible and capable of feeding a variety of parts and come equipped with a gear-motor and a variable frequency controller.

View Complete Details

Exit Conveyors

  • Model 1670

Model 1670 Exit Conveyor for Centerless Grinder is specifically designed to mount to the grinder’s lower slide and exit parts to the front of the grinder for end feed applications. These conveyors are capable of feeding all kinds of different parts.

View Complete Details

Roller Chain

  • Model 1650

Model 1650 Thru-Feed Conveyor with Roller Chain is designed and built around two specific applications 1) forging and 2) induction hardening; however it can be utilized in many other applications. Forging applications are extremely rough and abrasive as are the billets that need to be conveyed, and Feedall’s roller chain conveyors are designed to handle these tough conditions.

View Complete Details

Silent Chain Conveyors

  • Model 1650

Model 1650 — The Feedall line of thru-feed conveyors offer infeed and exit capabilities for complete automated shaft feed systems. Model 1650 features conveyor lengths of 62 12” and 72”, with a diameter range of 14” to 2”. Our variable speed drive operates up to 50 FPM with a 1” silent chain or non-marking belt.

View Complete Details

Thru-Feed Conveyors

  • Model 1650

Model 1650 — The Feedall line of Thru-Feed Conveyors offer entrance, intermediate and exit capabilities for a wide variety of machine tools and processes including centerless grinding, thread rolling, belt finishing, heat treating and assembly. Special design considerations allow these conveyors to operate in harsh environments (oily, chips, grinder swarf, etc.).

View Complete Details

Entrance Conveyors

  • Model 1650

Model 1650 — Feedall conveyors offer entrance, intermediate and exit capabilities for a wide variety of machine tools and processes including centerless grinding, thread rolling, belt finishing, heat treating and assembly. Special design considerations allow these conveyors to operate in harsh environments (oily, chips, grinder swarf, etc.).

View Complete Details

Intermediate Conveyors

  • Model 1650

Model 1650 — Feedall conveyors offer entrance, intermediate and exit capabilities for a wide variety of machine tools and processes including centerless grinding, thread rolling, belt finishing, heat treating and assembly. Special design considerations allow these conveyors to operate in harsh environments (oily, chips, grinder swarf, etc.).

View Complete Details

Polyurethane Timing Belt Conveyors

  • Model 1650

Model 1650 Thru-Feed Conveyors — Feedall conveyors offer entrance, intermediate and exit capabilities for a wide variety of machine tools and processes including centerless grinding, thread rolling, belt finishing, heat treating and assembly. Special design considerations allow these conveyors to operate in harsh environments (oily, chips, grinder swarf, etc.). Polyurethane timing belts are used for non-marring applications.

View Complete Details

Random Loaded Hopper Feeders

  • Model 2000/3000/3600/4800

Model 2000300036004800 Hopper Feeders are used for feeding cylindrical type parts such as, cut bars, tubes, and shafts with diameter ranges within a 2:1 ratio. Parts are bulk loaded or hand stacked in multiple rows when part orientation is required. This feeder is designed for higher feed rates and gentle handling of the parts with lower noise levels. By design this feeder naturally orients parts with the elevator belt, thus eliminating recirculation of misoriented parts. Our Model 1650 Cross-Feed Conveyor mounted to the front of the elevator allows a continuous flow in an end-to-end orientation. These feeders may be used to feed centerless grinders, thread rollers, induction heaters for selective hardening or preheating for forging and many other applications.

View Complete Details

Exit Conveyor for Viking Grinder

  • Model 1670

Model 1670 Exit Conveyor for Centerless Grinder are specifically designed to mount to the grinder’s lower slide and exit parts to the front of the grinder for end feed applications. These conveyors are capable of feeding a variety parts.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Willoughby, OH 44094 map, United States