FiberPlex Technologies, LLC

• Model #:SFP-BA10XC-0000-M

The SFP-BA10XC-0000-M is a medium reach electrical transceiver module designed to transmit and receive MADI signals up to 125 Mbps over 75Ω coaxial cables via HD-BNC™ connectors. The cable driver amplitude and edge rate are automatically configured in order to achieve compliance to AES10-2003. These MADI modules are also available as dual transmit and dual receive modules for use in the FOI-6012. These dual units are non-MSA compliant and would not be compatible with the WDM16.

• Model #:FAK-2981

A complete bundled package for Fire Alarm annuciation applications. Includes warning strobe. The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. In addition, fiber optic cable offers much longer transmission distances than copper wiring. Multimode optics on the units can extend the distance to 2km.

• Model #FOI-1GBT

The FOI-1GBT provides complete electrical isolation for 1000BASE-T Gigabit Ethernet communications. The unit has an automatic MDIMDIX switch over capability that allow users to use either a straight or crossover cable for all LAN configurations. The copper interface is fully automatic. If TP+ and TP- are reversed, the unit will automatically swap the polarity internally. Similarly, if the transmit and receive pairs are reversed, the unit will automatically swap both pairs internally. Therefore, either a crossover or straight cable can be used. The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. In addition, fiber optic cable offers much longer transmission distances than copper wiring. Traditional 1000BASE-T Cat5e cabling is limited to a maximum distance of 100m, but multimode optics on the unit can extend the distance to 550m, while singlemode optics can further extend the distance to 5km.A typical link consists of two FOI-1GBT, one at each end of the network, with a duplex fiber optic cable between them.

• Model #:TKIT-HDMI

Even though we deal with rocket scientists, this is NOT rocket science. So we are making it as simple as possible. One SKU gets you everything you need to improve your system from copper to fiber. Just pick your system… The FiberPlex Technologies ‘TKIT’ bundles takes the incredible flexibility of our TD-6010 12.5 Gbps workbox and bundles it with a set of application specific SFP modules to create a simple, easy to order solution for your specific application.

• Model #:MD-3

The MD-3 units are accessories for the LightViper Series 32 product line and are not stand alone products. They need to be connected to an existing LightViper Series 32 system to function. The MD-3 is used in pairs and will function utilizing the “Control” EtherCon® connector on Series 32 models including VIS-1832, VIM-1832, VIS-4832, VIM-1808 & VIM-0808. The MD-3 translates RS422RS232 or MIDI control information into TTL data. This data is then transported along with the audio input data (returns) from the FOH position to the Stage.

• Model #:ADP-2981 | ADP-2982

The ADP-2981 ADP-2982 is a stand-alone wall or shelf mountable loudspeaker unit. Each unit houses and powers an 8-inch speaker and, in the case of the ADP-2981, a high-intensity strobe. The unit utilizes FiberPlex FOI series modules to extend Public Address and Mass Notification systems via fiber. External audio signals such as voice announcements, music, a doorbell buzz, etc. are first connected to a FOI-2981 or FOI-2983. This FOI unit then transmits the signal via a fiber optic link to a FOI-4982, conveniently housed and powered by an ADP unit. From there the FOI-4982 drives up to 10 ADP units in a daisy chain. Each ADP unit is equipped with an AC line-powered supply to drive the amplifier and supply DC power to an attached FOI module. The ADP-2981 also contains a strobe annunciator, useful for areas with high background noise or those with hearing difficulties. A knob on top of the unit controls the volume threshold that the audio must exceed for the strobe to flash.