Post Your Requirement Menu

Welcome User

Other Products / Services

Our product range comtains a wide range of FC 10dB Bulkhead Fiber optic attenuator, 1310nm, FC Round Shape Bare Fiber Adapter, VFL, Red Fiber Optic Break Locator 5mw, Visual Fault Locator, for Fiber Optic Testing 10mw and SC Round Shape Bare Fiber Adapter

FC Round Shape Bare Fiber Adapter

  • Color: Black
  • Connector type FC
  • Warranty: Lifetime
  • Vendor: Fibertronics

Bare fiber adapters are used as a medium to connect bare fiber to your fiber optics equipment. These adapters were designed with speed in mind, and are traditionally used for power meter hookups, temporary repairs, or quick fiber connections. These come with a low insertion loss and high quality polish.

View Complete Details

VFL, Red Fiber Optic Break Locator 5mw

  • ) MQW LD optical source Operating mode: CW and MOD
  • 2.5mm FC, SC, ST general interface Steady power output

This Pen-type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification. This 5mW VFL (Visual Fault Locator) has a 2.5mm opening for the connector, for 1.25mm LC type connectors, a adapter should be used, (adapter sold separately).

View Complete Details

Visual Fault Locator, for Fiber Optic Testing 10mw

This Pen-type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification.

View Complete Details

SC Round Shape Bare Fiber Adapter

  • Color: Black
  • Connector type SC
  • Warranty: Lifetime
  • Vendor: Fibertronics

Bare Fiber Adapters are used as a medium to connect bare fiber to your fiber optics equipment. These adapters were designed with speed in mind, and are traditionally used for power meter hookups, temporary repairs, or quick fiber connections. These come with a low insertion loss and high quality polish

View Complete Details

Fiber Optic Splitter

PLC (Planar Lightwave Circuit) Splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. This PLC Splitter is a 1x2, with 1 input and 2 output fibers with an even split ratio across all fibers regardless of input wavelength. PLC Splitters are availble with 900µm loose tube singlemode fiber and terminated or unterminated as per your needs. Unconnectorized PLC splitters come with no connectors for easy splicing or connectorization. Connectorized PLC Splitters are available with your choice of Fiber Optic Connectors: LCUPC, LCAPC, SCUPC, SCAPC, FCUPC, FCAPC, and STUPC. Features: High quality PLC design features a protective metal casing around the fibers PLC splitting mechanism divides input signal into equal parts across all output fibers 900µm loose tube fiber for easy stripping, splicing, or terminating Also available pre-terminated with LCUPC, LCAPC, SCUPC, SCAPC, FCUPC, FCAPC, and STUPC.

View Complete Details

05dB Inline Fixed Attenuator

  • Fiber Mode Singlemode 9/125µm
  • Length: Choose Length
  • Warrenty: Lifetime
  • Vendor: Fibertronics

Inline Fixed Attenuator is built to meet your low reflection attenuation requirements. Each cable assembly is custom built to meet the customer’s needs. Up to 10 meters of cable and the fiber optic connector styles of your choice. In the 5dB, 10dB, 15dB and 20dB versions, these fiber optic fixed attenuators hold a +-.5dB tolerance. These inline fiber optic attenuators provide negligible back reflection. Connector options are ST, FC, FCAPC, LC, LCAPC, SC, SCAPC At time of ordering Please state the Length, connector type Needed. Product Features Ultra low back-reection. UPC or APC congurations. Custom dB levels available Interchangeable for a wide range of products Easy to install

View Complete Details

FC 10dB Bulkhead Fiber optic attenuator, 1310nm

  • Operating wavelength(nm) 1310/1550
  • Attenuation values(db) 5/10/15/20
  • Excess loss(db) 0.3

FC 10dB Bulkhead Fiber optic attenuator, 1310nm, Female-to-Female A fixed level of attenuation can be obtained by replacing the existing fiber optic bulkhead adapter at the patch panel with this FC Bulkhead Female to Female Fiber Optic Attenuator. This 1310nm FC inline Bulkhead type Female to Female Fiber Optic Attenuators utilize a doped optical fiber filter to achieve attenuation. The female-to-female type of these fiber optic attenuators enables them to accept standard FC type fiber optic connectors on each side of the bulkhead. Bulkhead Female to Female Attenuators are ideal for use in fiber optic patch panels, instrument front panels, and other applications that require a fixed level of attenuation and easy connectivity. These fiber optic attenuators are available in 5, 10, 15 and 20dB and wavelenghts of 1310nm and 1550nm values and are designed to replace standard bulkhead adapters.

View Complete Details

LC Square Shape Bare Fiber Adapter

  • Color: Black
  • Connector type LC
  • Warranty: Lifetime
  • Vendor: Fibertronics

Bare Fiber Adapters are used as a medium to connect bare fiber to your fiber optics equipment. These adapters were designed with speed in mind, and are traditionally used for power meter hookups, temporary repairs, or quick fiber connections. These come with a low insertion loss and high quality polish.

View Complete Details

Variable Fiber Optic Attenuator, 0-30dB

  • Model Model A
  • attenuation range(dB) 0~30
  • Uncertainty +5%
  • Working temperature -10~60oC

FT-VA3301A handhold optical variable attenuator is used for continuously variable optical signal attenuation. As the attenuator is used in the laser system for the on-line testing, This handheld variable attenuator can be used in the digital system of communication devices (such as: PHD, SDH) and also in the system of adopting analog modulation (CATV) Application Telecom Maintenance CATV Maintenance Comprehensive cable construction system Optical instruments research and development Optical communication education and lab testing Other optical project Features stepwise attenuating by circumgyrated dial: attenuating step 0.05dB Provide with the function of displaying dB and dBm attenuating value Alternative function of 10 minutes Auto-off without operation After off the instruments, the system will have the memorizing of the attenuating value and the attenuating step, in order to restore the system back to the previous shut down state when open the instruments next time

View Complete Details

ST 5dB Bulkhead Fiber optic attenuator, 1310nm

  • Operating wavelength(nm) 1310/1550
  • Attenuation values(db) 5/10/15/2
  • Excess loss(db) 0.3

ST 5dB Bulkhead Fiber optic attenuator, 1310nmST 5dB Bulkhead Fiber optic attenuator, 1310nm, Female-to-Female A fixed level of attenuation can be obtained by replacing the existing fiber optic bulkhead adapter at the patch panel with this ST Bulkhead Female to Female Fiber Optic Attenuator. This 1310nm ST inline Bulkhead type Female to Female Fiber Optic Attenuators utilize a doped optical fiber filter to achieve attenuation. The female-to-female type of these fiber optic attenuators enables them to accept standard ST type fiber optic connectors on each side of the bulkhead. Bulkhead Female to Female Attenuators are ideal for use in fiber optic patch panels, instrument front panels, and other applications that require a fixed level of attenuation and easy connectivity. These fiber optic attenuators are available in 5, 10, 15 and 20dB and wavelenghts of 1310nm and 1550nm values and are designed to replace standard bulkhead adapters.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Melbourne, FL 32904 map, United States