Filter 1 Clean Air Consultants

United States

ustom Built to Fit the ApplicationThis down draft table features ultra-efficiency nanofiber media filters, work surface grating, suction velocities of 150-300 FPM across the entire work surface, and automatic power pulse cleaning. The unit is self cleaned on a solid state timer which can be activated by the operator regardless of whether the fan is off or on. The removed dust falls into pull-out drawers in the bottom of the cabinet. Rated at MERV 15 efficiency, the Downtron's cartridge filters are constructed of nanofiber media, tightly meshed of ultra-fine fibers 300-500 nanometers in diameter, screening out sub-micron particles and resulting in easy release of the dust cake during the cleaning cycle. Because the nanofiber filter media operates at a 40-60% lower pressure drop than traditional cartridge medias, the Downtron industrial downdraft table features lower energy consumption and a longer filter life. The Filter 1 Downtron table is built of heavy gauge carbon steel to withstand hard use. It is sized to fit the application and provides the flexibility needed for "cell manufacturing

The Filter 1 Benchtron DowndraftBackdraft Workstation removes dust, fumes, and smoke from sanding, grinding, buffing, or welding of metals, composites, fiberglass, plastics, or wood. The Benchtron meets OSHA requirements for respirable dust down to .05MGM3, with adjustable suction velocities of 150 to 800 FPM in the "working zone." High efficiency filters remove 99.9% of all particles 12 micron and larger. The unit features automatic self-cleaning, flourescent lighting, and the Regain Air, "PushPull" technology pioneered by Filter 1 to provide a blanket of clean air in the "breathing zone."

Self-Cleaning Cartridge Air Cleaners Quiet, Efficient Operation The Flowtron Air Cleaner is packed with design features that go straight to the bottom line. The film-laminated media is state-of-the-art for collecting fine dust in heavy concentrations from a wide range of welding, grinding, and finishing operations. The large capacity dust filters clean thoroughly off-line for the lowest cost per pound of collected dust, and the low-speed backward inclined blower reduces the energy cost of moving the a

When moving from a dusty area to a clean zone, every worker can completely decontaminate in the Blow Off Booth. The "BOB" dislodges and removes hazardous material that could potentially contaminate others in the clean environment. The high-velocity blow-off system gets even the hidden dust. The dust is then captured and filtered within the auto-clean self-contained booth. The booth can also be used to blow dust off equipment or pallets of material. The BOB can effectively remove potentially hazardous materials, including dust generated from hexavalent chromium, lead, beryllium, strontium chromate, and carcinogenic paint. The Blow Off Booth is not only effective in dislodging all the dust, it is easier on the worker than alternative vacuum approaches. The air shower is more comfortable than a suction process, and the hands-off blow-down does not require another worker to assist in vacuuming off the dust. Furthermore, the Blow Off Booth provides a quick transition to the clean zone. Within seconds, the entire body is completely clean from any harmful dust.

Ultra-efficiency nanofiber cartridge filters vertically oriented for effective dust removalAutomatic power-pulse reverse-jet cleaning for continuous duty, uninterrupted filtration3 phase TEFC motor on rubber vibration mountsWelded heavy-gauge steel construction with industrial epoxy gulf blue coatingOptionsVarious Filter Medias to Fit the Application: 8020 Blends, Spun Bond Polyester, Phenolic or PTFE Coated, Fire Resistant, High Temperature, Metal ImpregnatedMagnetic Motor StartersHopper Slide GateHEPA or CARBON Safety Afterfilters with VisibleAudible AlarmsCleaning -- Pulse Control Through Automatic Off-Line Cleaning, Photohelic On-Demand Cleaning, Manual Switch or Continuous CleaningBackward Inclined Direct Drive Blower

95% ASHRAE Primary Filter3 Phase TEFC Motor on Rubber MountsSloped Drain Pan with 12" NPT Connection for Easy Removal or Recirculation of Coolant Air or Other MistsHinged, Gasketed Access Doors for Easy Filter ReplacementChevron ImpingerHeavy Guage Steel Construction with Industrial Enamel "Gulf Blue" CoatingOptionsWashable Metal Mesh Prefilter for Grinding ApplicationsOdor Control Disposable or Refillable After FilterASHRAE or HEPA Safty Filter with Visible or Audible AlarmsBlower Silencer

anel Filter Workstations for Schools & Welding Labs Ultimate Solution for Welding TrainingWith its powerful capture velocity and edge-to-edge backdraft inlet, the Filter 1 Weldtron 2000 effectively removes welding smoke and fume, providing protection and comfort for students and instructors in the training lab. In addition, the Weldtron 2000 features user-friendly operation, safety, space economy, and outstanding energy efficiency.

The Filter 1 Cyclotron combines a long tapered cone, a high velocity inlet, and a large internal helix to easily separate from the air stream all moderate size particles, such as saw dust chips and particles from metal grinding.The Cyclotron fans are positioned on the clean air side of the cyclone and are direct drive for low maintenence. In addition, the fans have backward inclined blower wheels for high efficiency and low noise operation. Optional Safety After Filters ensure that even the smallest particles are captured. Standard filter material for the after-filters is 16-ounce seared, felted polyester, designed to hold large dust particles to the outer edges, thus forming a filter cake which heightens filtering efficiency and facilitates easy removal. FeaturesLong, Tapered ConeHigh Velocity InletLarge Internal HelixHeavy-Gauge Steel Construction with Industrial Blue Enamel CoatingDirect Drive Backward Inclined BlowerOptionsSafety After Filters: Bags Fitted for 55-Gallon DrumsRemovable Galvenized Panels for Weather ExposureDrop Out Bins Built to Your SpecificationsRotary ValvesSpark Resistant ConstructionRadial Blower WheelsSprinkler HeadsExplosion Vents (Silencers)

The Filter 1 Hydrotron Dust Collector is specifically designed for capture of fine metal particles. The HWF series is a safe and economic method of cleaning these potentially volatile materials. With air volumes between 500 CFM and 5, 000 CFM, the units can be connected via ductwork to the dust generating machines for source capture. This water filter collector meets OSHA and NFPA regulations for dust collectors located inside the building. Options

The Filter 1 AdvantageThe first dust booth to implement the innovative regain of air principle, the Filter 1 Dustron increases worker comfort and visibility in the critical work areas. Capitalizing on the multiplied ventilation effect of "pushing" clean air out across the front of the booth as the blower "pulls" contaminated air into the filters, the Dustron provides velocities of 400800 FPM at the center zone of the booth where the dust is being generated. With Filter 1's fully implemented, fully adjustable PushPull Regain Air, the Dustron enhances the conditions and productivity of operations within the booth.