Post Your Requirement Menu

Welcome User

Our Products

  1. Brushes 2 Products / Services available
  2. Fibers 1 Products / Services available
  3. Rack 1 Products / Services available
  4. Metal Rack 1 Products / Services available
  5. Furniture Hardware & Fittings 4 Products / Services available
  6. Hardware Fittings and Accessories 1 Products / Services available
  7. Industrial & Oil Seals 2 Products / Services available
  8. Neckties, Bow Ties & Tie Accessories 1 Products / Services available
  9. Packaging Seals and Caps 1 Products / Services available
  10. PVC, PP & Plastic Products 1 Products / Services available
  11. Shoes 2 Products / Services available
  12. Doors 2 Products / Services available
  13. Files, Folders & Notebooks 3 Products / Services available
  14. Automobile Repair Tools & Equipment 3 Products / Services available
  15. Automotive Body Coach Building 4 Products / Services available
  16. Badges, Emblems & Lanyards 1 Products / Services available
  17. Adaptors, Plugs and Sockets 1 Products / Services available
  18. Nuts Bolts and Fasteners 3 Products / Services available
  19. Compression Springs & Air Springs 1 Products / Services available
  20. Laboratory Equipments 1 Products / Services available
  21. Bearings and Bearing Components 1 Products / Services available
  22. Engine Components 1 Products / Services available
  23. Industrial & Engineering Products 1 Products / Services available
  24. Brackets 1 Products / Services available
  25. Other Products 57 Products available

Other Products / Services

Our product range comtains a wide range of Hinge Bolt-Pin Hardware Packaged Set, Vent Door Latch Assembly, Eberhard Style Handle, Fruehauf Style Three-Hole Hinge and End Hinge Cover

Hinge Bolt-Pin Hardware Packaged Set

  • Weight 0.42

Hinge Bolt-Pin Hardware Packaged Set part no. 021-00376 weight: 0.42 Steel construction Zinc-plated finish Packaged Set includes one bolt, one nut, and four washers Bolt size is 12-13 x 5.50 long

View Complete Details

Vent Door Latch Assembly

Vent Door Latch Assembly and Components FEATURES Stainless steel construction Built in anti-theft capability Spring assisted pressure closing feature Latch assembly bulk kit includes latch, striker plate, keeper bracket, and female door hold back

View Complete Details

Safety Service Decks

Safety Service Decks All-direction, all-weather, slip-resistant design Positive drainage Available in aluminum and galvanized steel Rugged, lightweight construction Cross braces for added strength Pre-drilled holes for clamps Complete with mounting hardware Adjustable clamps allow for universal mounting Simple, economical, clamp-on installation

View Complete Details

Cam Assembly

  • Weight 0.10

Cam Assembly part no. 021-00184 weight: 0.10 dimensions: FEATURES Steel construction Zinc plated finish Set screw included

View Complete Details

One-Piece Weld-On Hinge Butts

One-Piece Weld-On Hinge Butts (Custom) 31″ hot rolled steel stamping Plain, zinc plated, or stainless steel available Straight type or notched type available Optional hardware available

View Complete Details

Square Butt Leaf Hinge Assemblies

  • weight 1.79

8.00" Square Butt Leaf Hinge Assemblies Stainless steel construction with spot welded leaves and thrust washers Polished finish .34″ round hole Minimum order of 100

View Complete Details

Fruehauf Style Three-Hole Hinge

  • Weight 2.40

Fruehauf Style Three-Hole Hinge 8.75" part no. 022-00007 weight: 2.40 FEATURES Steel construction Zinc plated finish

View Complete Details

Eberhard Style Handle

  • Weight 1.70

Eberhard Style Handle part no. 023-00491 weight: 1.70 FEATURES Steel construction Zinc plated finish

View Complete Details

Fruehauf Style Hold-Back

  • Weight 0.40

Fruehauf Style Hold-Back part no. 022-00487 weight: 0.40 dimensions: FEATURES Steel construction Plastic coated cable

View Complete Details

Miner Style Half-Bearing Rod Guide

  • Weight 0.35

Miner Style Half-Bearing Rod Guide part no. 023-00966 weight: 0.35 FEATURES Black plastic Part number represents one rod guide

View Complete Details

End Hinge Cover

  • Material Stainless Steel

End Hinge and Roller Cover for 2" Rollers Steel construction E-coat, E-coatpowder coat and Stainless Steel finish available Removable cover allows roller change without hinge removal

View Complete Details

Great Dane Style Four-Hole Hinge

  • Weight 1.19

Great Dane Style Four-Hole Hinge 8.38” x 3.88” part no. 022-01009 weight: 1.19 Aluminum extrusion With insert

View Complete Details

Miner Style Three-Hole Hinges

  • Dimensions 9.50” x 4.00”
  • Thickness 0.25″

Miner Style Three-Hole Hinges 9.50” x 4.00” Steel construction Zinc plated finish Available with or without zerk fitting Thickness = 0.25″

View Complete Details

Hyundai Style Three-Hole Hinge

  • DIMENSIONS 9.56” x 4.00”
  • Weight 1.51

Hyundai Style Three-Hole Hinge 9.56” x 4.00” part no. 023-01657 weight: 1.51 Aluminum extrusion With insert

View Complete Details

Trailer Belly Panel

  • weight 9.94
  • dimensions 60 x 24.5 in

Trailer Belly Panel FEATURES Protects cross members in the event of a tire blow out Reduces drag Easy installation onto trailer cross members 16 gauge high performance aluminum Universal fit Part number represents one piece

View Complete Details

Two-Step Folding Steps

  • capacity 500 lbs.

Folding Steps (Two-Step) Black primed steel Fits any standard truck frame 500 lbs. load capacity Available with 5.00′ wide ICC bumper bar Serial numbers applied at factory for identification 34.13″ frame width 4.00″ frame thickness 29.00″ step width 9.00″ step depth 7.88″ step rise

View Complete Details

Weld Tire Carrier

  • Weight 44

Weld-On Tire Carrier Heavy-duty, 12 gauge, formed steel construction for U channel 0.375″ x 4.00″ L support Black primer finish Accommodates tires up to 11.00″ x 22.00″ Additional warning decal sent at customer’s request Comes with chain to secure tire Assembled, packaged set

View Complete Details

Chain and Snap Hold-Back Assembly Packaged Sets

Chain and Snap Hold-Back Assembly Packaged Sets and Component Parts Steel construction Zinc plated finish

View Complete Details

Hold-Back Packaged Sets

Hold-Back Packaged Sets and Components Hot-dipped galvanized finish Hook mounting holes are .41″ Handle mounting holes are .20″

View Complete Details

AeroSaver Replacement Hardware

  • Weight 5.93

AeroSaver Replacement Hardware part no. 034-02649 weight: 5.93 dimensions: FEATURES Support hardware is zinc Skirting attachment hardware is stainless steel Includes two changes and hardware

View Complete Details

Corner Iron

  • Weight 4.85
  • DIMENSIONS 12″ x 12″ x 1-1/4″ wide

Corner Iron part no. 023-00975 weight: 4.85 dimensions: FEATURES Perfect 900, helps “square up” trailer 12″ x 12″ x 1-14″ wide Part number represents one piece Forged steel construction

View Complete Details

Spray Suppression Skirting

  • Weight 1.56 lbs.

Spray Suppression Skirting FEATURES Air flows freely through the flexible filament Brush reduces spray to keep vehicles cleaner Significant spray reduction improves both driver and motorist visibility ORDER DETAILS Each skirting packaged set comes in 8.00′ sections with two spray suppression brushes (6.00″, 9.00″, or 12.00″ length) and two aluminum channels (90-degree or straight mount) Special corrugated packaging allows parcel shipment of one to two kits per package Channel is available separately with the following Part No’s:

View Complete Details

Recessed Tie Down Ring Assembly

  • Weight 2.50

Recessed Tie Down Ring Assembly This product is for tie download securement purposes only. Steel construction Zinc plated finish Drain holes in bottom of cup Working load is 2, 300 lbs. Ultimate breaking strength is 7, 000 lbs. Ring opening width is 3.25″

View Complete Details

Flared End Axle

  • dimensions 8.5 x .20 x 1.90 in
  • weight 2.50

Flared End Axle Steel construction with black primer finish Application: Standard Foot Length = 8.50″ O.D. = 1.90″ Thickness = 0.20″

View Complete Details

Custom One-Piece Braces

  • diameter 66

FEATURES Black primer finish .66″ diameter mounting holes Side loaded ends Hole Center Length = per customer specification Material Options Include: 1.25″ pipe 1.50″ pipe 1.63″ tube 2.00″ pipe

View Complete Details

Two-Piece Adjust-a-Brace Package Set

  • thickness 12 gauge

Two-Piece Adjust-a-Brace Package Set FEATURES High strength steel tubing with reinforced end sections for greater tear-out resistance Black E-coat finish Heavy Duty Specs: Brace Wall thickness = 14 gauge Insert Wall thickness = 12 gauge Brace End O.D. 1.88″ Insert End O.D. 1.63″ Standard Duty specs: Brace Wall thickness = 14 gauge Insert Wall thickness = 14 gauge Brace End O.D. 1.75″ Insert End O.D. 1.5″

View Complete Details

Adjust-a-Shaft Bulk Kits

  • Material Tubular steel

FEATURES Tubular steel construction Black primer finish Adjustable to reduce inventory requirements ORDER DETAILS Kits consist of two ends to fit over 1.00″ shafting, choice of five middle tubes to cover all normal mounting lengths, and hardware Adjust-a-Shaft Ends and Tubes also available

View Complete Details

Removable Cranks

  • Material Metal

Removable Cranks FEATURES Metal handle Steel construction Black primer finish Handle is 3.75″ long

View Complete Details

Vertical Folding Cranks

  • size 1.25″

Vertical Folding Cranks FEATURES Metal handle Steel construction Handle is 3.75″ long Tube O.D. size is 1.25″

View Complete Details

Horizontal Folding Cranks

  • Size 1.25″

Horizontal Folding Cranks FEATURES Metal handle Steel construction Black E-coat finish Handle is 3.75″ long Tube O.D. size is 1.25″

View Complete Details

Louvered Vents

  • diameter 2″

Louvered Vents IMAGE SHOWN IS ADJUSTABLE LOUVERED VENT IN ALUMINUM FEATURES Slide arm openscloses vent The back has four 2″ diameter holes for air flow Plain or white enamel finish Adjustable and non-adjustable (always open) air flow available

View Complete Details

"Belly Box" Latch Assembly Packaged Sets

  • Material Stainless steel

"Belly Box" Latch Assembly Packaged Sets FEATURES Stainless steel or zinc finish ORDER DETAILS Packaged set latch assembly includes latch and keeper bracket

View Complete Details

Manifest Box

  • quantities 26

Manifest Box FEATURES Aluminum or white enamel case with weatherproof gasket seal to protect contents Tab and click stop for secure latch closing along with padlock eyelet, chrome plated clip and aluminum rivets Stainless steel hinge and latch assembly Plain aluminum or white enamel finish Aluminum Manifest Box is available in quantities of 26 per box

View Complete Details

Decorative Safety Service Decks

Decorative Safety Service Decks - Top Mount Slip-resistant ribbed deck design Positive drainage Rugged, lightweight construction Aluminum construction Mounting hardware included

View Complete Details

three step Folding Steps

  • capacity 500 lbs

Folding Steps (Three-Step) Black primed steel Fits any standard truck frame 500 lbs. load capacity Available with 5.00′ wide ICC bumper bar Serial numbers applied at factory for identification 34.63″ frame width 5.00″ frame thickness 29.00″ step width 9.00″ step depth 7.88″ step rise

View Complete Details

Back of Cab Tire Carriers

Back of Cab Tire Carriers Heavy-duty, 316″ steel construction Black primer finish Mounting brackets and hardware are not included May use 033-00374 (Qty. 2) for mounting bracket – order separately

View Complete Details

Latch Bar Assembly

  • Weight 0.30

Latch Bar Assembly part no. 021-00207 weight: 0.30 dimensions: FEATURES Steel construction Zinc plated finish

View Complete Details

Retainer Cam Assembly

  • Weight 0.44

Retainer Cam Assembly part no. 021-00217 weight: 0.44 dimensions: FEATURES Steel construction Zinc plated finish

View Complete Details

Narrow Butt Hinge Assembly

  • Weight 2.20

3.25" Narrow Butt Hinge Assembly part no. 021-00181 weight: 2.20 dimensions: FEATURES Steel construction, plain finish Includes removable pin using nut, bolt, and thrust washers

View Complete Details

Square Butt Hinge Assembly

5.00" Square Butt Hinge Assembly Stamped steel construction Zinc plated finish Stamped reinforcing rib Non-removable steel pin and nylon sleeve bearings Flush mount

View Complete Details

Embossed Hinge Assembly

  • Weight 1.70

8.00" Embossed Hinge Assembly (with Stamped Reinforcing Rib) Steel construction, zinc plated finish Stamped reinforcing rib Made with hardened steel truss bearings to effectively carry door loads Includes removable pin using nut, bolt, and thrust washers

View Complete Details

Narrow Butt Hinge Assemblies

  • weight 4.10

9.00" Narrow Butt Hinge Assemblies (with Embossed Rib) Flush with embossed rib Heavy-duty steel construction Zinc plated finish Includes a rolled end hinge

View Complete Details

Dorsey Style Three-Hole Hinge

  • DIMENSIONS 8.25” x 2.70”

Dorsey Style Three-Hole Hinge 8.25” x 2.70” part no. 022-00889 weight: 0.83 dimensions: FEATURES Aluminum extrusion

View Complete Details

Fruehauf Style Two-Hole Hinge

  • Weight 1.75

Fruehauf Style Two-Hole Hinge 7.94 x 2.00” part no. 022-00013 weight: 1.75 Steel stamping Zinc plated finish

View Complete Details

Kentucky Style "Belly Box" Hinge Assembly and Components

  • Weight 0.65

Kentucky Style "Belly Box" Hinge Assembly and Components part no. 022-01040 weight: 0.65 Aluminum extrusion With inserts

View Complete Details

Vanguard Style Three-Hole Hinge

  • DIMENSIONS 9.80” x 3.00”
  • Weight 1.07

Vanguard Style Three-Hole Hinge 9.80” x 3.00” part no. 022-01407 weight: 1.07 FEATURES Aluminum Hinge Insert weight = 0.001 lbs

View Complete Details

Wabash Style Four-Hole Hinge

  • Weight 0.78

Wabash Style Four-Hole Hinge: with collared inserts 8.60” x 2.86” part no. 022-01182 weight: 0.78 Aluminum extrusion With inserts that have “collars, ” making it easier to open and close doors

View Complete Details

Trailmobile Style Three-Hole Hinge

  • Weight 1.40
  • Dimensions 6.84” x 2.88”

Trailmobile Style Three-Hole Hinge (Square End) 6.84” x 2.88” part no. 023-00940 weight: 1.40 FEATURES Steel stamping Zinc plated finish

View Complete Details

Pro-Par Style Handle

  • dimensions 15.38 x 1.50 in
  • Weight 3.33

Pro-Par Style Handle part no. 023-00021 weight: 3.33 dimensions: 15.38 x 1.50 in Steel construction Zinc plated finish Length = 15.38″ Width = 1.50″ Thickness = 0.50″

View Complete Details

Fruehauf Style Two-Hole Hold-Back

  • Weight 0.50

Fruehauf Style Two-Hole Hold-Back part no. 022-00081 weight: 0.50 dimensions: FEATURES Steel construction Zinc plated finish

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Muskegon, MI 49442 map, United States