Post Your Requirement Menu

Welcome User

Other Products / Services

Our offered Product range includes Kiss Pkg Feeder Bowl FEE18, Kiss Pkg Unscrambler Disc, ED24RN14 Minnesota Automation Feeder Coupon Inserter, UltraSource LLC Material Handling COMPAC and Cap Cleaner 92/250.

Kiss Pkg Feeder Bowl FEE18

  • Category Feeder
  • Dimension OAD: 28"L x 28"W x 60"H

SS, cap feeder bowl. Equipped with 18" diameter bowl & adjustable height legs. Unit mounted on SS stand for stability.

View Complete Details

Kiss Pkg Unscrambler Disc

  • Category Unscrambler
  • Model 42"S/S LOADING TABLE

All Stainless Steel 42" Diameter Disc Accumulation Table, Mounted On A Stainless Steel Base. Unit is Complete With Side Rails, And Is Mounted On 4 Screw Leveling Legs.

View Complete Details

Arrowhead Conveyor Side Belt Transfer ELEVATOR

  • Category Conveyor
  • Dimension OAD: 97" L x 40" W x 140" H

Elevator, "S" style design, with side belt product grippers, speeds dependent on application. Can handle glass, can, and plastic containers as well as pouches, cartons and others. Has a 25" product infeed height raising to a 128" product discharge height, dual side belt grippers with individual 3 14" L x 1 14" Thick soft pliable product gripper bulbs on each side and is width adjustable to handle products from 0 – 13" W, with 1 Hp motor drive one each side, and is mounted on base frame.

View Complete Details

Pos Disp DAB54 Filamatic Filler Liquid

  • Category Fillers - Liquid Filling
  • Dimension OAD: 48" L x 36" W x 50" H

Automatic, inline, 4 piston filling system rated up to 10 cycles per minute – depending on materials and application. Equipped with 48" long by 4-12" wide delron conveyor, adjustable product guides and pneumatic indexing system. Fill range: 0.1 to 130 ml Accepts pistons up to 130ml. Change parts required to accommodate fill range.

View Complete Details

Ropak Form Fill Filling Head 15S Machine

  • Category Form Fill Seal
  • Dimension OAD: 120" L x 46" W x 70" H

Automatic, intermittent FF&S rated up to 110 ppm – depending on materials and application. Size range: 2-38" to 5-78" in Length; 3-18" to 8-58" in Height. Equipped with diamond tear notch punch, vacuum scrap removal, vacuum bag opener and bottom seal. Discharge conveyor 84" L x 8" W and with height adjustable from 30" to 47". Film reel size of 19-12" x 19 12".

View Complete Details

45 CU FT Oscar Krenz Horizontal Paste Mixer

  • Category Mixers - Paste Mixing
  • Dimension OAD: 98"(L) x 60"(W) x 86"(H)

45 cu ft., 304 SS, jacketed dual shaft ribbon mixer. Internal dimensions: 68" x 42" x 29". Jacket rated to 50 psi @ 300 F. Equipped with 2-piece flip top cover, two 6" product inlets with pneumatic slide gates and two pneumatic gate end discharges. Shaft rotation: 43rpm. Mounted on SS legs.

View Complete Details

incline cleated belt conveyor

  • Category Feeder
  • Dimension OAD: 96" L x 42" W x 90" H

5 cubic foot, SS, incline cleated belt conveyor. Equipped with a 32" W x 24" L hopper with lexan flip-top cover and a 44"H infeed, 8" wide belt with 3 34" cleats, 11" L x 10 12" W discharge aperture with a 54" H discharge height. Features 12 hp motor and currently set on steel base.

View Complete Details

Sigma Counter Parts PFX

  • Category Counter
  • Dimension OAD: 41"(L) x 21"(W) x 90"(H)

High speed electronic counting system capable of counting and feeding 100 to 1700 ppm and up to 85 accurate batches (depending on product) per minute while achieving accuracies of -0, +.01%. Batch sizes may be from 1 to 9, 999 parts per batch. Unit is capable of handling a wide variety of items ranging in size up to 12" x 12" x 2". Equipped with 3 cuft. hopper, variable speed vibratory feeder with 5"(W) x 3"(D) pan supplying product to 18" dia. triple coil vibratory bowl with 400 cu. inches capacity, and countingaccumulation module with 51"(H) discharge. PFX counting unit utilizes highly accurate optical sensor with ability to detect multiple parts passing the sensor and is capable of deflecting parts away from accumulator once batch size is detected. Unit mounted on painted steel base with casters for mobiltiy and was last used in a hardware counting application.

View Complete Details

2139RF Label Aire Labeler

  • Category Labeler
  • Dimension OAD: 48" L x 42" W x 51" H

Label Aire 2139RF pressure sensitive, wipe-on labeler for (2) side, or around the corner of cases rated up to 12" per seconds – depending on materials and application. Label size to 4" in Width by 18" in Length with (6" Diameter x 4" High vacuum transfer drum). Swing arm vacuum roller applicator enables unit to apply either (2) labels on 2 side or (1) label around a corner. Accuracies of +- 132.

View Complete Details

ED24RN14 Minnesota Automation Feeder Coupon Inserter

  • Category Feeder
  • Dimension OAD: 49"L x 40"W x 70"H

Single arm, reciprocating, coupon feeder capable of up to 60 cycles per minute – depending on materials and application. Product range: (7" – 24")W, (7" – 15")H. Features 9" long reciprocating arm, magazine supported from two sides, 4-cup coupon vacuum pick & place, requires house vacuum, hand crank length and height adjustments with siko guages and 36"L magazine.

View Complete Details

ET Oakes Corporation Mixer Paste Horizontal 14MC15A

  • Category Mixers - Paste Mixing

High shear, continuous, rotor, stator, mixer capable of doing from 315 lbhr to 1800 lbhr. Unit is equipped with a 7 12 hp drive motor, 34 hp pump and 14" inletoutlet. Unit is jacketed with MAWP: 60 PSI @ 100 Fahrenheit down to -20 deg. F @ 200 PSI. Unit mounted on four legs.

View Complete Details

VPRS250 Rovema Form Scale

  • Category Form Fill Seal

Continuous motion, 14 head combination scale and vertical form fill & seal machine rated up to 30 to 120 bags per minute – depending on materials and application. Weight range: 50g to 1, 000g. Bag size range: 4" to 19-1116" in Length; 2-38" to 9-1316" in Width. Combination scale: Equipped with a stainless steel vibratory feeder, fourteen 240 in³ stainless steel buckets, and microprosessor controls. Form Fill and Seal: Equipped with film registration, servo controlled film tracking, dual side belt film assist, 10" long lap seal, 11" wide cross seal, AB PLC, interlocking Lexan safety guarding, and a touch pad controller. Film specifications: up to 21" width; up to 24" in diameter; 3" core.

View Complete Details

Waukesha Pump 34RF

  • Category Pump
  • Dimension OAD: 30"L x 30"W x 35"H

316 SSl, positive displacement, square flange inlet, pump capable of up to 24 gallons per minute. Has 3 gallon SS infeed hopper, 6 34" x 1 34" square flange inlet, 2 12" diameter threaded O.D. discharge, right angle SS discharge pipe, 200 pis rating, 400 rpm maximum, -40F to 300F temperature range, and displacement of 0.060 gallon per revolution. Mounted on SS frame with locking casters.

View Complete Details

Atlas Vac Blister Shuttle 18 X 30

  • Category Blister
  • Dimension OAD: 53" L x 53" W x 60"H

Semi-automatic, single shuttle, blister tray sealer. Seal Dimensions: 18" x 30" or 540 in². Maximum part depth: 10". Seal Pressure: 10, 000 lbs @ 100 psi. Equipped with variable heat pressure seal time controls, high low alarms and auto shut off for seal times temps and pressures.

View Complete Details

Unipac Tube Metal SILVER 80

  • Category Tube
  • Dimension OAD: 53" L x 48" W x 89" H

Unipac Silver 80, Automatic, metal tube filler, sealer rated from 20 to 75 tubes per minute – depending on materials and application. Tube size range: 10mm – 40mm in Diameter; 2" – 10" in Height. Fill range: 1.5 – 450ml with proper change parts. Equipped with 20" ID x 24" deep agitated product hopper and compression auger, 24" diameter, 12 station turntable, 25" x 28" tube magazine, photo eye registration, tube cleaner, no tube no fill, bottom up fill, 400 ml piston, 58" OD positive cut off nozzle, two crimping and folding stations, emboss coder, ejection station with chute and interlocked safety guarding. Change parts requires to accommodate size range. All 316 stainless steel contact parts.

View Complete Details

UltraSource LLC Material Handling COMPAC

  • Category Material Handling
  • Dimension OAD: 48" L x 24" W x 80" H

Electric roll stock lift rated up to 275bs. Product size: core 2-12" to 3" in Diameter. Vertical travel: 12" to 69". Equipped with spring activated gripper, built in battery charger, inner core grip attachment, and push button up down lift controls. Mounted on casters. Can grip roll in either vertical or horizontal position. Stainless steel construction.

View Complete Details

APV Gaulin Homogenizer 2 Stage 15-15MR-8TA

  • Category Homogenizer
  • Dimension OAD: 44" L x 32" W x 54" H with product hopper

Stainless steel, lab size homogenizer rated to 15 gallons per hour – depending on materials and application. Pressure rating: 8000 psi continuous, 10, 000 psi intermittent motion. Piston stroke: 2-18". Equipped with ball valve, 6" ID x 12" deep stainless steel product hopper and pressure gauge. Mounted on stainless steel stand with casters.

View Complete Details

Ktron Feeder Auger K2

  • Category Feeder
  • Dimension OAD: 48" L x 34" W x 57" H

Ktron Model K2, stainless steel, single auger screw loss-in-weight feed system rated from 5 to 20 cubic feet per hour – depending on product and density. Equipped with 29" long x 18" wide x 32" deep stainless steel conical extension product hopper with dual horizontal agitator blades, 24" long x 2-12" OD stainless steel single auger screw and 3-34" OD vertical discharge port with 5" floor clearance. 12 Hp motor drive with DC variable speed controller and mounted on gross capacity weigh bridge base stand. Used for volumetric feeding of free flowing powders, granules and other bulk materials.

View Complete Details

Key Pak Form & Fill Scale V350B

  • Category Form Fill Seal
  • Dimension OAD: 85” L x 62” W x 84” H Form/Fill/Seal

Vertical, form, fill and seal machine rated up to 40 bags per minute – depending on materials and application. Bag size range: 2” to 12" in Width; 4” to 17” in Length. Equipped with two head linear scale system, static eliminator, registration, side belt film assist, 13" horizontal hot knife seal jaws, 18” vertical lap seal, AB PLC, with Durant Model 6450 touch pad controller and, film feed, heater, static bar, scale and registration controls. Film Specifications: up to 25" in width; up to 15" in diameter on 3" diameter core.

View Complete Details

Material Handling Tote Dump 48" DISCHARGE

  • Category Material Handling
  • Dimension OAD: 79" L x 60" W x 114" H

Dual hydraulic tote dumper rated up to 2, 000 lbs. Maximum load size: up to 48" in length; up to 42" in width; up to 41" in height. Equipped with a 10-12" high infeed, 81" high pivot point, and a 48" discharge height.

View Complete Details

SWF Case Set-Up Tray Glue 1T4

  • Category Case Set-Up (Tray)
  • Dimension OAD:70" L x 60" W x 80" H

Tray former, hot melt glue, rated up to 58 trays per minute – depending on materials and application. Tray size range: 7" to 34" in Length; 8-18 to 22 in Width; 1" to 12" in Height. Knockdown size range: 10-12" to 37-78" in Length; 12" to 36" in Width. Equipped with blank tray magazine, suction cup recipicating vacuum pick-n-place, vacuum tray feeder with friction wheel, Nordson hot melt glue system with pattern contoller, vacuum pump, and safety guarding.

View Complete Details

Cap Cleaner 92/250

  • Category Pharmaceutical
  • Dimension OAD: 30"L x 30"W x 50"H

Tablet deduster, vertical vibration, 316 stainless steel, blown air and vacuum flow system rated up to 1, 800, 000 tablets per hour – depending on materials and application. Tablet Size: 3 mm – 20 mm in diameter. Equipped with an acrylic glass housing, adjustable vibration, 3-12" wide x 1-58" high rectangular infeed with a 34" infeed height from floor, 2" diameter discharge with a 43-12" discharge height from floor and a touch pad controller with LED display. Mounted on a stainless steel, vertical, height adjustable frame with locking casters.

View Complete Details

Waukesha Pump Positive 15

  • Category Pump
  • Dimension OAD: 51" L x 30" W x 48" H

Waukesha, Model 15, positive displacement pump with 316 stainless steel contact parts. Rated from 1 to 10 gallons of product per minute – depending on materials, application and machine configuration. 200 psi maximum working pressure and capable operating both clockwise, or counter clockwise. Equipped with an internal by pass pressure valve vented cover, 2" OD 1" ID Tri-clamp style product charge discharge with 10½" ground clearance. Powered by a 1 Hp drive with a variable speed controller and a 8:1 gear ratio for a maximum current rate of 2.847 galmin. Mounted on a 44" long x 20" wide stainless steel push cart.

View Complete Details

Kiss Pkg Capper Semi Auto (Capper) VACT06DG

  • Category Capping
  • Dimension OAD: 68" (L) x 50" (W) x 72" (H)

Three station semi-automatic capper (torquer) with: three sets of spindle style tightener wheels. With speeds up to 150 cpm, this unit is capable of cap size ranges of 10mm-110mm. Has air torque adjustment on third spindle set, individual speed adjustment on spindle and container belt speed, height adjustment on capping head, independent gripper belt height adjustment, ss base with wheels and leveling legs.

View Complete Details

Seitz Stainless Tank SS Single Wall 264 GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 54"W x 64"L x 80"H

Seitz Stainless, 1000 Liter (264 gallon), 316 stainless steel, transfer tank. Internal Dimensions: 54" Diameter x 27" Straight Wall. Internal pressure rating: 75 psi @ 284°F, Full vacuum rating: -20°F @ 75 psi. Equipped with a dome top, 16" diameter man way with bolt down cover, three 1-12" Tri-Clover connections, two 4" Tri-Clover connections, two side mounted push handles and, a 3" flush mounted center bottom discharge with a hand crank diaphragm valve. Interior finish:.240 grit. Exterior finish: 140 grit Mounted on stackable stainless steel frame with forklift runners and locking casters.

View Complete Details

Feeder Auger CLUSTER BUSTER

  • Category Feeder
  • Dimension OAD: 120"L x 67"W x 136"H

Commercial Manufacturing, 304 stainless steel delumper. Equipped with a 96" long x 48" wide x 76" deep, 175 ft³, bulk stainless steel product hopper with lift out safety grate, 84" long pin bar agitation with 12" long pins, 84" long x 12" diameter bottom auger. Pin bar and auger powered by a common 7½ hp drive. Product discharges from a 13" x 13" chute with 40" ground clearance. Mounted on a stainless steel frame.

View Complete Details

Cherry Burrell Tank SS Single Wall 4000GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 94"L x 84"W x 240"H

Cherry Burrell, 4000 Gallon, 304 stainless steel, single wall mixing tank. Vessel Dimensions: 84" diameter x 170" straight wall. Equipped with a dome top, dish bottom, 20" x 16" side manway with bolt down cover, 19" diameter top manway with bolt down cover, (3) Paddle agitation powered by a 2.44.5 hp drive, CIP spray ball supplied by a 2"OD 1½"ID Tri-Clamp fitting and 3½"OD 3"ID seated bevel style bottom discharge with 20" ground clearance. Side Access: (1) 6"OD 2"ID Flange (1) 1" NPT Top Access: (2) 3½"OD 3"ID Tri-Clamp (3) 3½"OD 3"ID Seated Bevel (1) 3"OD Open Vent

View Complete Details

Walker Tank SS Single Wall 7000GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 130"L x 120"W x 182"H

Walker, 7000 Gallon, 304 stainless steel, slab mounted single wall mixing tank. Vessel Dimensions: 118" diameter x 144" straight wall. Equipped with a dome top, slant bottom, 20" x 16" side manway with bolt down cover, Paddle agitation powered by a 3 hp drive, thermowell, CIP spray ball supplied by a 2"OD 1½"ID Tri-Clamp fitting and 3½"OD 3"ID Tri-clamp style bottom discharge. Side Access: (1) 2"OD 1½"ID Tri-Clamp Top Access: (1) 3"OD Open Vent (1) 3½"OD 3"ID Tri-Clamp (1) 2½"OD 2"ID Tri-Clamp (1) 2" NPT

View Complete Details

JVNW Inc Tank SS Single Wall 8500GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 112"L x 110"W x 250"H

JV Northwest Incorporated, 8500 Gallon, 304 stainless steel, single wall mixing tank. Vessel Dimensions: 108" diameter x 218" straight wall. Equipped with a dome top, slant bottom, 22" x 16" side manway with bolt down cover, bottom sweep agitation powered by a 1 hp drive, thermowell, CIP spray ball supplied by a 2"OD 1½"ID Tri-Clamp fitting and 3½"OD 3"ID Tri-clamp style bottom side discharge. Side Access: (1) 7½"OD 3"ID Flange Top Access: (1) 3½"OD 3"ID Tri-Clamp (1) 3"OD 2½"ID Tri-Clamp (3) 2½"OD 2"ID Tri-Clamp

View Complete Details

Cherry Burrell Tank SS Single Wall 6000GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 120"L x 115"W x 230"H

Cherry Burrell, 6000 Gallon, 304 stainless steel, single wall mixing tank. Vessel Dimensions: 110" diameter x 144" straight wall. Equipped with a dome top, dish bottom, 20" x 16" side manway with bolt down cover, Paddle agitation powered by a 2 hp drive, thermowell, pressure sensor, CIP spray ball supplied by a 2"OD 1½"ID Tri-Clamp fitting and 4½"OD 4"ID Tri-clamp style bottom discharge with 28" ground clearance.

View Complete Details

Cherry Burrell Tank SS Single Wall 3600GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 94"L x 88"W x 230"H

Cherry Burrell, 3600 Gallon, 304 stainless steel, single wall mixing tank. Vessel Dimensions: 84" diameter x 140" straight wall. Equipped with a dome top, dish bottom, 20" x 16" side manway with bolt down cover, prop agitation powered by a 2 hp drive, 9" wide fixed baffle, thermowell, pressure sensor, CIP spray ball supplied by a 2"OD 1½"ID Tri-Clamp fitting and 7½"OD 5¾"ID I-Line style bottom discharge with butterfly valve and 28" ground clearance.

View Complete Details

JVNW Inc Tank SS Single Wall 3000GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 102"L x 96"W x 168"H

JV Northwest Incorporated, 3000 Gallon, 304 stainless steel, single wall tank. Vessel Dimensions: 92" diameter x 100" straight wall. Equipped with a dome top, dish bottom, 20" x 16" side manway with bolt down cover, 20" diameter top manway with bolt down cover, bottom side prop agitation powered by a 1 hp drive, exterior level sight tube, CIP spray ball supplied by a 2"OD 1½"ID Tri-Clamp fitting and 4¾"OD 3¾"ID Tri-Clamp style bottom discharge with 36" ground clearance.

View Complete Details

Walker Tank SS JKT 6000GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 125"L x 115"W x 220"H

Walker, 6000 gallon capacity, 304 stainless steel jacketed and insulated cooling tank rated for 55 gallons per minutes of glycol or cold water at 15psi Vessel dimensions: 108" diameter with 144" straight wall. Equipped with a dome top, dish bottom, 20" x 16" side manway with bolt down cover, thermowell, 3 Hp top mounted prop agitator and 3½" OD 3" ID tri-clamp style bottom discharge with pneumatic butterfly valve and 20" ground clearance.

View Complete Details

Zanasi Filler Powder Capsule 40F

  • Category Fillers - Powder Filling
  • Dimension OAD: 50"L x 38"W x 72"H

Zanasi, Model 40F, automatic capsule filler. Rated from 5, 000 to 40, 000 capsules per hour – depending on materials, application and size capsule. Stainless steel construction. Capsule size range: 000 to 5, supro A-E, DB, DBAA (with proper change parts). Equipped with 8 station rotary table that cycles 6 capsules at a time, empty capsule hopper, product hopper, 20" long x 4" wide discharge chute. Control panel with programmable controller. Mounted on a stainless steel base with guarding.

View Complete Details

WCB APV Anderson Cherry Burell Freezer

  • Category Freezer
  • Dimension OAD: 120" L x 60" W x 82" H

KMLT340 continuous, 3 tube, mix air over run ice cream 400 gph total production @ hour of 100% over run ice cream, @ 22 deg f, and 260 gph @ 14 deg f, Has (3) 12" OD x 40" L product tubes, with (3) mix, and (3) mix air Model F-AR 2 Hp rotary pumps with 1 12" OD sanitary infeed discharge ports, on off pump buttons (3) Dart pump controllers (3) Athena pressure gauges, refrigerant 300 gph ammonia, quick shut off valves, temp, and pressure gauges, 20 Hp dasher motor.

View Complete Details

WCB APV Anderson Cherry Burell Feeder

  • Category Feeder
  • Dimension OAD: 48" L x 24" W x 52" H

Automatic, SS, weighing feeding blending system capable of doing up to 600 – 2000 gallons @ hr of combined frozen desserts, and ingredients. Accurately, and evenly meters ingredients into viscous liquid product stream such as fruits nuts (the ingredient), ice cream (the product) from a continous ice cream freezer. Has 16" L x 17" W x 16" D 14 gallon, SS hopper with flip off cover and 6" dia plexey glass site port, (3) blade agitator, 4" dia single screw auger, feed tube, drop ingredients from the hopper into 4 pocket rotor enrobing chambers, and hydraulic blender attachment with 3 12" OD top threaded port and 3 12" OD sanitary port into feeder deposits ingreidents to the product stream, is blended and sent to filler, and is mounted on all SS base frame with caster.

View Complete Details

Hercules Material Handling Tote Dump

  • Category Material Handling
  • Dimension OAD: 40"L x 48"W x136"H

SS column buggy tote dumper system rated at 600 lbs with 108" discharge height and 180° dump rotation. Hopper: 26-34" x 24". Unit is floor mounted

View Complete Details

Signature Packaging Machinery

  • Category Shrink
  • Dimension OAD: 86"L x 40"W x 74"H

Dual chamber shrink tunnel with twin blowers, mesh belt and variable speed 7’L x 16" w conveyor capable of speeds from (0 – 98 FPM). Heat chamber is 84"L x 22"W x 12"H with a 42"L x 17"W, mesh belt. Variable temp controls from 50 – 400 deg F. Unit has variable velocity and temperature control. Equipped with onoff heat switch for cool-down. Mounted on casters.

View Complete Details

Doboy Sealer Bag Band

  • Category Sealer Bag
  • Dimension OAD: 84" L x 46" W x 70" H

Continuous band sealer rated at speeds up to 425" per minute – depending on materials and application. Seal width: 14". Equipped with two sets of heating bars, one set of cooling bars, Variable temperature controls. Unit pivots on stand to seal in vertical to horizontal positions. Mounted on a height adjustable frame with casters.

View Complete Details

RM32FC Durable Sealer Case Taper

  • Dimension OAD: 69"(L) x 40"(W) x 70"(H)
  • Category Sealer Case

Automatic, top (or bottom) case taper capable of sealing up to 30 cpm. Case size ranges are 4" to 20"(L) x 3 34" to 20"(W) x 4" to 32"(H). Equipped with 66"(L) side belts, pneumatic rear minor flap closer, 2"(W) tape reels, and adjustable case discharge from 21" to 30"(H).

View Complete Details

CP48F Ohara Pans

  • Category Revolving Pan
  • Dimension OAD: 80" L x 48" W x 69" H

48" ID SS, conical shaped coating pan with maximum capacity of 40.5 gallons and maximum working capacity of 19.5 gallons. 48" ID ribbed coating bowl, 36" deep, and 24" ID access opening with plastic cover. 3 hp motor drive with speeds to 20 Rpm, and is mounted on a mild steel base stand.

View Complete Details

Doboy Wrapper Horiz. Wrapper SCOTTY

  • Category Wrapper
  • Dimension OAD: 72" L x 36" W x 66" H

Horizontal wrapper rated up to 45 packages per minute – depending on materials and application. Package size range: 4" to 15" in Length; 1" to 5-12" in Width; 116" to 2-34" in Height. Equipped with a 42" long stainless steel lugged infeed set on 9" centers, adjustable former, fin sealing wheels, 1-up 7" wide cross seal, variable speedtemperature controls, and a stainless steel discharge chute. Film specifications: up to 14" in width; up to 12" in diameter; 3" core.

View Complete Details

3M Sealer Case Taper 12AF

  • Category Sealer Case
  • Dimension OAD: 60" L x 38" W x 60" H

3M Model 12AF, automatic, adjustable, top and bottom case taper rated from 5 to 26 cases per minute – depending on materials and application. Case size range: 6" to unlimited in Length; 6" to 24" in Width; 4.75" to 20" in Height. Equipped with 17" wide x 60" long bottom skate conveyor, side belt case transfer conveyors, flap closer and plows, 2" top and bottom tape heads, hand crank adjustable. Mounted on (4) leg base frame.

View Complete Details

Groen Kettle Electric TDB/7-20

  • Category Kettle
  • Dimension OAD: 26" L x 16" W x 38" H

20 Quart, 304 stainless steel, single motion, self contained steam jacketed kettle. Vessel dimensions: 14" in Diameter; 15" in Depth. MAWP: 50 psi @ 300°F. Equipped with scrape surface agitation, variable temperature controls, and a tilt discharge.

View Complete Details

Sweco Sifter Separator ZS30S66660N

  • Category Sifter Separator
  • Dimension OAD: 39" L x 39" W x 39" H

30" diameter, 2-deck, 1-screen, stainless steel vibratory sifter. Equipped with a 8" diameter top center inlet, two 6" deep decks, two 3.5" diameter side ports and two 5" diameter discharges. Mounted on a pedestal style base.

View Complete Details

Westfalia Centrifuges SAMR 3036

  • Category Centrifuges
  • Dimension OAD: 88" L x 46" W x 80" H

Westfalia Model SAMR 3036, automatic, desludger clarifier, bowl centrifuge, rated from 5 to 20 gallons of product per minute with between 2% to 5% solids – depending on type of product run. Stainless steel contact parts, equipped with 20" ID disc seporator with self cleaning bowl and clamp down cover, clarification design for (liquid solids separation) bowl rated up to 7700 rpm and 10 Hp drive rated up to 1740 rpm. Features a Model BS-85 rotray brush strainer with 16" diameter x 17" straight wall, flat top has a top mounted 14 hp drive with 6 inner side scrape rotary brushes and inner side wall strainer screen, cone bottom with center bottom discharge valve. Control panel with bowl, flush and feed open close auto control switches with start and stop buttons and process timer and counter contollers.

View Complete Details

Candy Disc

  • Category Candy
  • Dimension OAD: 60"L x 50"W x 38"H

72" Diameter, variable speed, mesh table top and discharge height of 36". Mounted on casters OAD: 90"L x 74"W x 40"H

View Complete Details

Safeline Metal Detector Tablet PH-L1

  • Category Metal Detector
  • Dimension OAD: 24" L x 24" W x 38" H

Safeline Model PHL-1 stainless steel, gravity feed pharmaceutical metal detection system for tablets and capsules rated from 12, 000 to 60, 000 tablets per hour – depending on materials and application. sensitivity rating: 1.5mm ferrous, 1.1 for non-ferrous, and 1.2mm stainless steel depending on materials and application. Equipped with 3" Wide x 78" High aperture, inline dual side gate reject and touch pad controller with operator interface and LED display. Mounted on a stainless steel frame with casters. Design height and slide angle are adjustable, for compatibility with most tablet presses and de-dusters.

View Complete Details

Walker Tank Processors P7-CB-K 125 GAL

  • Category Stainless Steel Tank
  • Dimension OAD: 54" L x 44" W x 78" H

Walker Model P7-CB-K, 125 gallon 316L stainless steel, dual mixer, jacketed vessel. Chamber dimensions: 32" ID; 32" in Depth. Full side and bottom jacket rated at MAWP of 100 psi @ 300 Deg F and MDMT of 120 Deg F @ 100 psi. Equipped with bridge mounted scrape surface and x-mas tree agitation, dual flip top covers, four 4" OD sanitary top ports (one with CIP spray ball), one 2" OD side and one 2" OD bottom threaded jacket inlet and outlet, one 2"OD side port and side temperature probe. Dish bottom with 2" OD threaded center bottom discharge with 12" of floor clearance. Mounted on four stainless steel legs.

View Complete Details

RB300 M W Tablet inspection machine

  • Category Pharmaceutical
  • Dimension (OAD = 60"W x 24"L x 60"H)

Single or dual operator inspection belt capable of speeds up to 100, 000 cph (depending on sizeshape & frictional characteristics). Has automatic rotation to provide 360 degree view of all inspected products. Equipped w 12" diameter 304 SS rollers w 58" pitch inspection conveyor. Complete with under roller light for gel cap inspection, continous feed vacuum pickup for defective products, overhead adjustable light wsaftey mirror, seperate conveyor roller motor & vibrating feeder, dust removal tray, #4 SS contact parts. Unit mounted on casters.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Carol Stream, IL 60188 map, United States