Post Buy Requirement
F&
United States
Add Review

Our Products

Extrusion Screen Packs

Extrusion Screen Packs
Extruder Screens are available in a complete range of sizes and shapes. Please Contact Us if you want to place an order or obtain more information.



Please use the menu on the right to navigate the rest of the website.


Our supplier of Extruder screens has been manufacturing Extrusion screens for over 130 years.
Available Extruder screens come in steel and stainless steel. Also available are spot-welded and aluminum-bound Extruder screen packs. Custom Extrusion screens are available.
View Complete Details

LEGROM SPINNING

About Legrom: Legrom is a company located in Germany that has more than 70 years of experience. Legrom is an international company delivering their variety of products to many sectors around the world.
View Complete Details

Vacuum Pyrolysis Cleaning Ovens

Vacuum Pyrolysis Cleaning Ovens
The page below contains imagesinformation about Vacuum Pyrolysis Cleaning Ovens by Fourn. Directly below this paragraph is a link to a PDF by Fourn featuring detailed informationimages about the various Vacuum Pyrolysis Cleaning Ovens that we offer.
How our Vacuum Pyrolysis Cleaning Ovens Differ from the Competition
SPEED The cleaning cycle is 4-8 hours
ENERGY Short cleaning cycles, low energy consumption
SAFETY Easy and safe operation
VERSATILITY Suitable for many different thermoplastic polymers
ECOLOGICAL No cleaning agents or solvents necessary, meets EPA standards

The Images above are two Vacuum Pyrolysis Cleaning Ovens that are ideal for industrial use. However, there are many more options that can be viewed in the PDF featured at the top of the page. We can also cater to customer specifications and provide Vacuum Pyrolysis Cleaning Ovens to customer specifications.
View Complete Details

Hot Knives

Hot Knives
Heat-cutting of synthetic fabric, ropes and belts.
Today, it is important to combine as many processes as possible for time and cost saving reasons. Therefore stop cutting mechanically and take advantage of the heat-cutting and sealing system in one operation.
Our simple cutting system is highly effective. The blade directly heated by a transformer heats up in 68 secs. to approx. 600 C. All thermoplastic fabric which comes into contact with the Hot Knife will melt. In a webbing, if they are close enough together, the individual weft and warp threads tend to flow into one another to form a consistent sealed edge.
We supply components and single parts to modify existing or newly purchased machines.
On request, we can make special constructions of machines, units and blades.
We also produce:
Heat-cutters
Rope and belt cutting machines
Machines cutting fabric in width
Machines cutting fabric in length
Thermal shape-cutting installation
Specialized units, devices and machines.
View Complete Details

Nippon Nozzle Spunlace Jet Strips

Nippon Nozzle Spunlace Jet Strips
Nippon Nozzle produced the first commercial Spunlace Jet Strips in the early 1970s and since then they continue to keep their position as the world leader in Water Jet Strips for Spunlace.
Unique technology and custom manufacturing capabilities allow Nippon Nozzle to manufacture Spunlace Jet Strips with capillary diameters significantly smaller than 100 microns while still maintaining the highest degree of accuracy, quality, and energy from the Waterjet needles.
View Complete Details

Air Jet Parts

Spare parts for Water Jet and Air Jet Looms

Frankl & Thomas is proud to offer OEM quality Water Jet parts for your Nissan and Tsudakoma water jet looms. We also feature Air Jet Loom parts. Please Contact Us if the product you need isnt listed.



Please use the menu on the right to navigate the rest of the website.


We have served the water jet loom industry for 10+ years and look forward to helping our valued customers reduce costs without sacrificing quality. Mike Alexander, our weaving expert, managed a mill with 136 Nissan Water Jet Looms.
View Complete Details

KLUBER LUBRICATION

This page features Kluber Lubrication. Kluber has been in business over 80 years and is a global leader in specialty lubricants. Below is an image, information, and a list of various applications Kluber Lubrication can improve upon.
When Manufacturers make the switch to Kluber they notice increased lube intervals, less down-time, and less time applying lubrication. As a result they consistently experience higher production while saving time and money.
View Complete Details

Ring Spinning Travellers

Rings and Ring Spinning Travellers

Reiners & Frst uses patented technology to produce the most consistent and long-lasting Rings and Travellers on the market.

When Manufacturers make the switch to Reiners & Furst Rings and Travellers, they benefit from the long life and high quality. The longer life allows for longer up-time and less down-time in production, saving your plant money and time.



Special Features : Spinning and twisting rings for short staple, long staple, tyre cord and filaments as well as travellers with unique surface treatments. We excel at providing custom solutions.

Today the R&F brand is an established trademark in more than 90 countries and is synonymous with quality and reliability in the textile industry.
View Complete Details

HT SEPARATOR ROLLS

  • Series HT Series
HT Series
Designed for fine and industrial filament-high temperature
Designed for high temperatures ranging from 120 C to 250 C on the working surface. Offered in grease pack or oil mist type. This roll can stand extreme heat and still function effectively.
View Complete Details

REINERS AND FURST SPIN CLEANER

  • Series Spin Cleaner SC1
Spin Cleaner SC1
Keep your machines in perfect working order with the Spin Cleaner SC1. This fluff collector removes fiber build-up, helping to ensure your yarn stays a constant quality. This product is built to withstand daily wear and tear. All parts are easily serviced and spare parts are available.
The following size Spin Cleaners are available (lengths):
300 mm
400 mm
500 mm
600 mm
800 mm
View Complete Details

Air Knives

The Air Knife is currently unavailable while under-going technical improvements. Once it is Market-ready this page will be updated with current information.
What you need to know about the Air Knife
It uses the principle of Non Contact Cutting for cutting any waste that needs to be removed.
The air knife can be used on almost any machine parts like the positorque units, ceramic discs, nip rollers, bakelite drums, steel shafts, rollers, etc. Also including many other delicate & inaccessible places where the conventional cutting blades or j-hooks cannot reach.
Our Air Knives can cut through all types of thermoplastic materials such as nylon, polyester, pp, etc. Yarns as well as woven non-woven fabrics, synthetic films, etc.

The air knife is easy to use. It has simplified electronic controls that use a supply of hot compressed air as the cutting medium.
View Complete Details

TOP-DRIVEN FLYERS

CHINESE ROVING FRAMES FOR FLYERS WITH CENTER SPINDLE
TOP-DRIVEN FLYERS
for specification please use Questionnaire UGKMUGKML

Flyer model UGKM
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing up to 1800 rpm
heat-treated special steel presser (various designs)
fixed or exchangeable center spindle (22mm or 25mm dia)
special anti-lint surface finish
sealing ring and twist cap
Flyer model UGKML
for back row of roving frames, to equalize the roving angle between flyer entrance and drafting system
other specifications as above
View Complete Details

TOP-DRIVEN FLYERS GROSSENHAINER

  • Series GROSSENHAINER BF 90-1 | BF 91-1 | BF 90-3 | BF 224
TOP-DRIVEN FLYERS
for specification please use Questionnaire UGKMUGKML

Flyer model UGKM
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing up to 1800 rpm
heat-treated special steel presser (various designs)
exchangeable center spindle (19mm or 25mm dia.)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGKMH
Special design for worsted and long staple, with oxide ceramic insert.
Special presser UGK-L.
other specifications as above
View Complete Details

HOWA RME

  • Series HOWA RME | RMH | RMK
HOWA RME RMH RMK
TOP-DRIVEN FLYERS
for specification please use Questionnaire UGKMUGKML

Flyer model UGKM
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing up to 1800 rpm
heat-treated special steel presser (various designs)
fixed or exchangeable center spindle (22mm dia or 25mm dia)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGKML
for back row of roving frames, to equalize the roving angle between flyer entrance and drafting system
other specifications as above
View Complete Details

HOWA 612

  • Series HOWA 612 | Max Rove | RM 100 | RM 714
HOWA 612 Max Rove RM 100 RM 714
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
sealing ring and twist cap
Flyer model UGRL
for back row of roving frames, to improve the roving angle between flyer entrance and drafting system
other specifications as above
View Complete Details

TEXTIMA 1505/6

  • Series TEXTIMA 1505-1 / -2/ -3 TEXTIMA 1505/6
TEXTIMA 1505-1 -2 -3
TEXTIMA 15056
TOP-DRIVEN FLYERS
for specification please use Questionnaire UGKMUGKML

Flyer model UGKM
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing up to 1800 rpm
heat-treated special steel presser (various designs)
exchangeable center spindle (25mm dia)
special anti-lint surface finish
sealing ring and twist cap
Flyer model UGKML
for back row of roving frames, to equalize the roving angle between flyer entrance and drafting system
other specifications as above
Flyer model UGKMH
Special design for worsted and long staple, with oxide ceramic insert.
Special presser UGK-L.
other specifications as above
View Complete Details

TEXTIMA 1502-1

  • Series TEXTIMA 1502-1 / -2 / -3 / -5 TEXTIMA 1502-6
TEXTIMA 1502-1 -2 -3 -5
TEXTIMA 1502-6
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
sealing ring and twist cap
Flyer model UGRL
for back row of roving frames, to improve the roving angle between flyer entrance and drafting system
other specifications as above
Flyer model UGRH
Special design for worsted and long staple, with oxide ceramic insert.
Special presser UGR-L.
other specifications as above
View Complete Details

ELECTRO-JET Roving Frames

ELECTRO-JET Roving FramesTOP-DRIVEN FLYERS
for specification please use Questionnaire UGKUGKL

Flyer model UGK
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing up to 1800 rpm
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGKL
for back row of roving frames, to equalize the roving angle between flyer entrance and drafting system
other specifications as above
View Complete Details

OKK OKR 3A

  • Series OKK OKR 3A
OKK OKR 3A
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGRH
Special design for worsted and long staple, with oxide ceramic insert. Special presser UGK-L. Very sturdy design for heavy duty production at flyer speeds up to 1400 rpm
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
View Complete Details

RIETER F4-1

  • Series RIETER F4-1 | F5 | F11 | F30| F33 |
RIETER F4-1 F5 F11 F30 F33

TOP-DRIVEN FLYERS
for specification please use Questionnaire UGKUGKL

Flyer model UGK
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing up to 1800 rpm
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGKL
for back row of roving frames, to equalize the roving angle between flyer entrance and drafting system
other specifications as above
View Complete Details

RIETER F1

  • Series RIETER F1/1 | GM
RIETER F11 GM
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGRL
for back row of roving frames, to improve the roving angle between flyer entrance and drafting system
other specifications as above
Flyer model UGRH
Special design for worsted and long staple, with oxide ceramic insert.
View Complete Details

SCHLUMBERGER BM 11

  • Series SCHLUMBERGER BM 11 | BM 12 | BM 14 | BM 14 Automatic | BM 15
SCHLUMBERGER BM 11 BM 12 BM 14 BM 14 Automatic BM 15
TOP-DRIVEN FLYERS
for specification please use Questionnaire UGKUGKL

Flyer model UGKH
Special design for worsted and long staple, with oxide ceramic insert. Special presser UGK-L. Very sturdy design for heavy duty production at flyer speeds up to 1800 rpm
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing up to 1800 rpm
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
View Complete Details

PLATT

  • Model Number PLATT - all models
PLATT - all models
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGRL
for back row of roving frames, to improve the roving angle between flyer entrance and drafting system
other specifications as above
View Complete Details

SACM

  • Series SACM | BB6 - Intergros | Supergros
SACM BB6 - Intergros Supergros
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
View Complete Details

TASCHKENT

  • Series TASCHKENT - P 192 , P260
TASCHKENT - P 192 , P260
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
View Complete Details

Whitin G10D

  • Model Number Whitin G10D | Whitin Mod.J | Mod. Scotsman
Whitin G10D Whitin Mod.J Mod. Scotsman
FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGRL
for back row of roving frames, to improve the roving angle between flyer entrance and drafting system
other specifications as above
Flyer model UGRH
Special design for worsted and long staple, with oxide ceramic insert.
View Complete Details

Flyers

FLYERS
for specification please use Questionnaire UGRUGRL

Flyer model UGR
Specially hardened steel cone part to fit the original spindle
cast-in polished stainless steel tube from top to exit
high precision dynamic balancing throughout the total operative speed range from 600 to 1400 rpm.
heat-treated special steel presser (various designs)
special anti-lint surface finish
HOLZ twist cap
Flyer model UGRL
for back row of roving frames, to improve the roving angle between flyer entrance and drafting system
other specifications as above
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Frankl & Thomas, Inc.)
  • Greenville, SC 29616 map, United States
  • Share us via