Networking Device #5203038

Acer EMC-2240A Machining Center with ATC Featuring FAGOR ControlFAGOR 8055iA-MC ControlMachining center includes:Tool clamp unclamp button.Halogen light.Four coolant nozzles splash the workpiece.Retractable Z axis roller cover that blocks coolant and chips from entering the side ways.Telescopic steel way cover.Y, Z axes with square ways.Hard stop limit switch which is also the secondary traveling limit.Three axes hardenedground slideway at Rockwell C 45 degrees.Table splash guard have retractable doors.Column side guard.FC 30 Castings weigh only 8360 lbs.2.5 HP German servo motor joined with C5 ball screw with non-slip HTD timing belt and pulley.All Acer EMC spindles contain 5 P4 precision angular contact ball bearings (NSK or FAG).Automatic arm type tool changer. , 20 tool changer is standard.Optional 16 or 24 tool changer.10 HP spindle motor made in Germany.ACER electric cabinet is ready for more expansion.90 degree swing overhead control arm.This unit is a brand new OEM machine Global Machine Brokers is an OEM licensed distributor of ACER machines.

Acer E-Lathe 1740G Engine Lathe Infinite 25-2200 (3 gear range) constant spindle speed. Easy change in no time (4 sec).High efficient 7.5 HP spindle motor for high torque output.Accept both single phase and three phase power.Low maintenance and down time cost due to fewer gears in headstock.Constant surface speed (optional).Electronic and mechanical brake for fast spin spindle stops internal threading.No R.P.M. gear changer break down, accurate reading on R.P.M. to prolong tool life.Save energy cost up to 35%.Spindle speed could be adjusted to best condition during cutting.

Acer E-Lathe 1760G Engine Lathe, Infinite 25-2200 (3 gear range) constant spindle speed. Easy change in no time (4 sec).High efficient 7.5 HP spindle motor for high torque output.Accept both single phase and three phase power.Low maintenance and down time cost due to fewer gears in headstock.Constant surface speed (optional).Electronic and mechanical brake for fast spin spindle stops internal threading.No R.P.M. gear changer break down, accurate reading on R.P.M. to prolong tool life.Save energy cost up to 35%.Spindle speed could be adjusted to best condition during cutting.

Acer EMC-2550 with ATC Featuring FAGOR Control FAGOR 8055iA-MC Control with high speed machining standard.4 coolant nozzlesRetractable Z axis roller coverHard stop limit switchThree Axes hardened and ground slideway at Rockwell C 45 degreesFC 30 castings weigh 8, 360 lbs2.5 HP servo motor made in GermanyAutomatic arm type tool changer , 20 tool changer standard16 or 24 tool changer optional10 HP spindle motor made in GermanyElectric cabinet is ready for expansionOverhead control arm has 90 degree swingEMC spindle contains 5 P4 precision angular contact ball bearings (NSK or FAG)Table splash guard with retractable doorsColumn side guardTelescopic steel way coversY, X axes have square ways

Acer EMC-3060 with ATC Featuring FAGOR Control FAGOR 8055iA-MC Control with high speed machining standard.4 coolant nozzlesRetractable Z axis roller coverHard stop limit switchThree Axes hardened and ground slideway at Rockwell C 45 degreesFC 30 castings weigh 8, 360 lbs2.5 HP servo motor made in GermanyAutomatic arm type tool changer , 20 tool changer standard16 or 24 tool changer optional10 HP spindle motor made in GermanyElectric cabinet is ready for expansionOverhead control arm has 90 degree swingEMC spindle contains 5 P4 precision angular contact ball bearings (NSK or FAG)Table splash guard with retractable doorsColumn side guardTelescopic steel way coversY, X axes have square ways

Acer EMC-3580 with ATC Featuring FAGOR ControlFAGOR 8055iA-MC Control with high speed machining standard.4 coolant nozzlesRetractable Z axis roller coverHard stop limit switchThree Axes hardened and ground slideway at Rockwell C 45 degreesFC 30 castings weigh 8, 360 lbs2.5 HP servo motor made in GermanyAutomatic arm type tool changer , 20 tool changer standard16 or 24 tool changer optional10 HP spindle motor made in GermanyElectric cabinet is ready for expansionOverhead control arm has 90 degree swingEMC spindle contains 5 P4 precision angular contact ball bearings (NSK or FAG)Table splash guard with retractable doorsColumn side guardTelescopic steel way coversY, X axes have square waysAcer EMC-3580 with ATC Featuring FAGOR ControlFAGOR 8055iA-MC Control with high speed machining standard.4 coolant nozzlesRetractable Z axis roller coverHard stop limit switchThree Axes hardened and ground slideway at Rockwell C 45 degreesFC 30 castings weigh 8, 360 lbs2.5 HP servo motor made in GermanyAutomatic arm type tool changer , 20 tool changer standard16 or 24 tool changer optional10 HP spindle motor made in GermanyElectric cabinet is ready for expansionOverhead control arm has 90 degree swingEMC spindle contains 5 P4 precision angular contact ball bearings (NSK or FAG)Table splash guard with retractable doorsColumn side guardTelescopic steel way coversY, X axes have square ways

Acer EMC-3580 with ATC Featuring FAGOR Control FAGOR 8055iA-MC Control with high speed machining standard.4 coolant nozzlesRetractable Z axis roller coverHard stop limit switchThree Axes hardened and ground slideway at Rockwell C 45 degreesFC 30 castings weigh 8, 360 lbs2.5 HP servo motor made in GermanyAutomatic arm type tool changer 20 tool changer standard16 or 24 tool changer optional10 HP spindle motor made in GermanyElectric cabinet is ready for expansionOverhead control arm has 90 degree swingEMC spindle contains 5 P4 precision angular contact ball bearings (NSK or FAG)Table splash guard with retractable doorsColumn side guardTelescopic steel way coversY, X axes have square ways

Acer Dynamic 2480G Lathe Ampere meter for indicating power consumption.Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle.Manual jog button.12 speeds range from 25 to 1, 200 RPM.Oil flood indicator.One of the outside gears on the gear box is designed with a safety ring to protect it from damage.Optional 2nd starting lever.Drip-proof 15 HP spindle motor.Magnetic disc brake with foot pedal allows for rapid control of the spindle rotation.Hardened & ground bedways at Rockwell C 55.Electro-trochoid pump forces lubrication oil to all running parts outside of the headstock.Handwheel with direct inchmetric reading micro-collar.Precision ground cross slideways.Saddle-lock device for heavy cutting.Rapid four directional travel.Safety clutched and longitudinal lead screw.4 TPI and oil bathed longintudinal lead screw.Oil level indicator.Forwardstopreverse lever with safety device.Multi-position length stop.Removable chip pan.Machine bed with FC-30 casting iron.Machine weighs in at 7, 150 7, 810 8, 690 9, 570 7, 650 8, 310 9, 190 10, 070 lbs

Ampere meter for indicating power consumption.Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle.Manual jog button.12 speeds range from 25 to 1, 200 RPM.Oil flood indicator.One of the outside gears on the gear box is designed with a safety ring to protect it from damage.Optional 2nd starting lever.Drip-proof 15 HP spindle motor.Magnetic disc brake with foot pedal allows for rapid control of the spindle rotation.Hardened & ground bedways at Rockwell C 55.Electro-trochoid pump forces lubrication oil to all running parts outside of the headstock.Handwheel with direct inchmetric reading micro-collar.Precision ground cross slideways.Saddle-lock device for heavy cutting.Rapid four directional travel.Safety clutched and longitudinal lead screw.4 TPI and oil bathed longintudinal lead screw.Oil level indicator.Forwardstopreverse lever with safety device.Multi-position length stop.Removable chip pan.Machine bed with FC-30 casting iron.Machine weighs in at 7, 150 7, 810 8, 690 9, 570 7, 650 8, 310 9, 190 10, 070 lbs

Acer Dynamic 24160G Lathe Ampere meter for indicating power consumption.Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle.Manual jog button.12 speeds range from 25 to 1, 200 RPM.Oil flood indicator.One of the outside gears on the gear box is designed with a safety ring to protect it from damage.Optional 2nd starting lever.Drip-proof 15 HP spindle motor.Magnetic disc brake with foot pedal allows for rapid control of the spindle rotation.Hardened & ground bedways at Rockwell C 55.Electro-trochoid pump forces lubrication oil to all running parts outside of the headstock.Handwheel with direct inchmetric reading micro-collar.Precision ground cross slideways.Saddle-lock device for heavy cutting.Rapid four directional travel.Safety clutched and longitudinal lead screw.4 TPI and oil bathed longintudinal lead screw.Oil level indicator.Forwardstopreverse lever with safety device.Multi-position length stop.Removable chip pan.Machine bed with FC-30 casting iron.Machine weighs in at 7, 150 7, 810 8, 690 9, 570 7, 650 8, 310 9, 190 10, 070 lbs.

Acer Dynamic 2960G Lathe Ampere meter for indicating power consumption.Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle.Manual jog button.12 speeds range from 25 to 1, 200 RPM.Oil flood indicator.One of the outside gears on the gear box is designed with a safety ring to protect it from damage.Optional 2nd starting lever.Drip-proof 15 HP spindle motor.Magnetic disc brake with foot pedal allows for rapid control of the spindle rotation.Hardened & ground bedways at Rockwell C 55.Electro-trochoid pump forces lubrication oil to all running parts outside of the headstock.Handwheel with direct inchmetric reading micro-collar.Precision ground cross slideways.Saddle-lock device for heavy cutting.Rapid four directional travel.Safety clutched and longitudinal lead screw.4 TPI and oil bathed longintudinal lead screw.Oil level indicator.Forwardstopreverse lever with safety device.Multi-position length stop.Removable chip pan.Machine bed with FC-30 casting iron.Machine weighs in at 7, 150 7, 810 8, 690 9, 570 7, 650 8, 310 9, 190 10, 070 lbs.

Acer Dynamic 2980G Lathe Ampere meter for indicating power consumption.Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle.Manual jog button.12 speeds range from 25 to 1, 200 RPM.Oil flood indicator.One of the outside gears on the gear box is designed with a safety ring to protect it from damage.Optional 2nd starting lever.Drip-proof 15 HP spindle motor.Magnetic disc brake with foot pedal allows for rapid control of the spindle rotation.Hardened & ground bedways at Rockwell C 55.Electro-trochoid pump forces lubrication oil to all running parts outside of the headstock.Handwheel with direct inchmetric reading micro-collar.Precision ground cross slideways.Saddle-lock device for heavy cutting.Rapid four directional travel.Safety clutched and longitudinal lead screw.4 TPI and oil bathed longintudinal lead screw.Oil level indicator.Forwardstopreverse lever with safety device.Multi-position length stop.Removable chip pan.Machine bed with FC-30 casting iron.Machine weighs in at 7, 150 7, 810 8, 690 9, 570 7, 650 8, 310 9, 190 10, 070 lbs.

Acer Dynamic 29120G Lathe Ampere meter for indicating power consumption.Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle.Manual jog button.12 speeds range from 25 to 1, 200 RPM.Oil flood indicator.One of the outside gears on the gear box is designed with a safety ring to protect it from damage.Optional 2nd starting lever.Drip-proof 15 HP spindle motor.Magnetic disc brake with foot pedal allows for rapid control of the spindle rotation.Hardened & ground bedways at Rockwell C 55.Electro-trochoid pump forces lubrication oil to all running parts outside of the headstock.Handwheel with direct inchmetric reading micro-collar.Precision ground cross slideways.Saddle-lock device for heavy cutting.Rapid four directional travel.Safety clutched and longitudinal lead screw.4 TPI and oil bathed longintudinal lead screw.Oil level indicator.Forwardstopreverse lever with safety device.Multi-position length stop.Removable chip pan.Machine bed with FC-30 casting iron.Machine weighs in at 7, 150 7, 810 8, 690 9, 570 7, 650 8, 310 9, 190 10, 070 lbs.

Acer Dynamic 29160G Lathe Ampere meter for indicating power consumption.Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle.Manual jog button.12 speeds range from 25 to 1, 200 RPM.Oil flood indicator.One of the outside gears on the gear box is designed with a safety ring to protect it from damage.Optional 2nd starting lever.Drip-proof 15 HP spindle motor.Magnetic disc brake with foot pedal allows for rapid control of the spindle rotation.Hardened & ground bedways at Rockwell C 55.Electro-trochoid pump forces lubrication oil to all running parts outside of the headstock.Handwheel with direct inchmetric reading micro-collar.Precision ground cross slideways.Saddle-lock device for heavy cutting.Rapid four directional travel.Safety clutched and longitudinal lead screw.4 TPI and oil bathed longintudinal lead screw.Oil level indicator.Forwardstopreverse lever with safety device.Multi-position length stop.Removable chip pan.Machine bed with FC-30 casting iron.Machine weighs in at 7, 150 7, 810 8, 690 9, 570 7, 650 8, 310 9, 190 10, 070 lbs.