Our Products #4943627

Clemco blast machines are built to survive the real world. With wear- parts positioned for quick replacement, Clemco blast machines virtually eliminate downtime so they spend more time on the job. Choose from cubic foot to 20 cubic foot capacity in both portable and stationary models- blast machine only and machine packages. ASME Coded Conical bottom ensures smooth abrasive flow Large inspection door Wear resistant urethane- coated pop-up valve seals Special Lo- Pot machines for low profile applications Pneumatic or electrical remote controls Pressure hold systems

Systems are available in single or multi-stage configurations to suit virtually any type of cleaning application including washing, rinsing, phosphating, rust inhibiting, and drying. Drum Systems can accommodate a wide variety of part sizes and geometries using a perforated drum designed to process the necessary solution to clean, rinse and dry the parts. Parts can be manual or automatic load and unload systems are available. Rugged stainless steel tanks and enclosures provide superior durability, chemical resistance and quality appearance. Systems can be equipped with all popular heating systems including electric, gas or steam. Standard features include: The tank and upper housing are constructed of 10 gauge, 304 stainless steel. 2" mineral wool insulation is covered by 16 gauge, polished, 304 stainless steel skin. The drum is constructed of perforated carbon steel with perforations designed to allow maximum cleaning for your particular parts. Flights and kickers are installed to tumble the parts and enhance the cleaning, rinsing, and drying process. Vertical centrifugal pumps with carbon steel wetted parts are sized for the most effective coverage within the spray stages. Internal spray headers down the center of the drum, are designed to provide complete spray coverage throughout the cleaning process. A mild steel bag filter follows each pump. Each filter has two (2) pressure gauges to indicate the need for a filter bag change. Dual stainless steel mesh screens protect the pump suction. Tanks are heated by stainless steel element immersion heaters designed to maintain the specified temperature. Automatic liquid level controls fill the tanks and protect the pumps and heaters. Each tank top is equipped with a maintenance access removable lid. The dry off stage has a stainless steel tubular heater following a regenerative blower. A filter, relief valves, and gauges are assembled with the blower. Stainless steel air knives are positioned down the center of the dry off stage to direct air to the parts being processed. NEMA 12 main control panel. All guarding and labeling meets OSHA standard requirements.

The ZERO Automated Pulsar 3P-iR is a pressure blast cabinet for todays demanding manufacturing environments. It incorporates the state-of-the-art in robotic controls for nozzle manipulation providing perfectly repeatable blasting of parts of all geometries and meets the strictest standards for automotive, aerospace, medical, and other industry applications. Additional robotic options include pick-and-place robotics for easy loading and unloading, and a vision package for automatically detecting even the most minor part defect Pulsar 3P-iR Features: Time and Labor-saving FANUC Robotics 5 or 6 degrees of freedom Up to 5 kg payload at wrist 2 double-acting solenoid valves simplify tooling dressout Teach pendant for easy programming and custom user interface design Extended networked IO capabilities Supports a variety of intelligent functions, i.e. vision, force sensing Enclosed mechanical design eliminates cables and hose snagging Robot features tabletop size, slim wrist, and small footprint permitting operation in tight work spaces Advanced communication via Ethernet and serial connections Integrated PMC provides ladder-logic control for periphera

Systems are available in single or multi-stage configurations to suit virtually any type of cleaning application including washing, rinsing, phosphating, rust inhibiting, and drying. Automatic chip removal can be added to the system. Belt systems can accommodate a wide variety of part sizes and geometries using standard open weave conveyor belts or custom designed fixtures. Manual or automatic load and unload systems are available. Rugged stainless steel tanks and enclosures provide superior durability, chemical resistance and quality appearance. Systems can be equipped with all popular heating systems including electric, gas or steam. Standard features include: The tank and upper housing are constructed of 10 gauge, 304 stainless steel. 2" mineral wool insulation is covered by 16 gauge, polished, 304 stainless steel skin. Vertical centrifugal pumps with carbon steel wetted parts are sized for the most effective coverage within the spray stage. Internal spray headers are designed to surround the parts and provide complete spray coverage throughout the cleaning process. A mild steel bag filter follows each pump. Each filter has two (2) pressure gauges to indicate the need for a filter bag change. Dual stainless steel mesh screens protect the pump suction. Tanks are heated by stainless steel element immersion heaters designed to maintain the specified temperature. Automatic liquid level controls fill the tanks and protect the pumps and heaters. Each tank top is equipped with a maintenance access removable lid. Each process stage of the upper housing has a lift out access door that allows easy maintenance entry. A window can be added to the lift out doors to allow process viewing. Standard units have 1" x 1" stainless steel flat wire belts. Different belt opening sizes and construction materials are available. The dry off stage has a stainless steel tubular heater following a regenerative blower. A filter, relief valves, and gauges are assembled with the blower. Stainless steel air knives are positioned to direct air to all sides of the parts being processed. NEMA 12 main control panel with IEC electrical components. All guarding and labeling meets OSHA standard requirements.

Giant Finishing Wedge series is our economical line of portable vibratory finishing machines. This Wedge 3 is on heavy industrial wheels for exclusiveportability and on demand in-house vibratory tumbling, polishing or deburring. The Wedge series are designed for job shops and other companieslooking to eliminate their out-source metal parts finishing or desire the capability to run their own deburring equipment without any haste, roll it, plugit in and flip the switch. That simple! We take pride in our equipment being built in America and all of our vibratory finishing machines will provide you with the best surface enhancementfor your parts. Giant Finishing can help you choose the right vibratory equipment, tumbling media and chemical compounds. You can finish the partprofessionally, efficiently and on a consistent basis. Finishing, deburring or polishing metal surfaces is done best with a Giant machine.

Giant Finishing FT Series is our larger scale vibratory deburring equipment and parts finishing system. The Flo-Thru features our Balanced SuspensionDrive for those high volume vibratory finishing applications. This system is ideal for the facility that is looking to set up in-line production for a continuous flow of parts. Allowing the operator on one end of the finishing equipment to drop parts on a conveyor then receive parts on a constant basis on the other end. Essentially we give you the option to have a very complex yet very flexible material handling system which allows for virtually no operator guidance, just push start and walk away. System can be set up for in line single operator use or no operator involvement at all by utilizing conveyors and other material handling systems.

100% SeparationSpiral bottomHeavy duty bowl & base weldmentRemovable cast polyurethane drain plugJ.I.C. Control panelPolyurethane liningTuned coil spring suspensionDrop-on weight segmentsRemovable cast urethane screenAdjustable amplitude flywheelMedia discharge doorParts Discharge rampSteel media readyParts load chuteFlexible time cyclesVariable speed drive15 - 25 - 35 - 45 and 60 Cu. Ft. Sizes

For big jobs, the BNP 600 and BNP 720 offer the biggest work chambers available in manual blast cabinets - 60 by 58 by 50 inches tall and 72 by 72 by 60 inches tall, respectively. Available in suction and pressure models, ZERO's Mini Blast Rooms accept a wide array of Options Plus modification. Add the basics, such as turntable and track with vertical door, or tailor the system to your application with oscillating arms, pass-through doors, multiple guns - even additional work stations.

Tumble Belt Cabinets Zero Industrial Tumble Belt Cabinets.Built for manufacturers who need efficient, reliable, high-production blasting. Zero offers super-duty tumble belt cabinets for high-production suction or pressure blasting on heavy parts and large batches up to 800 pounds. Remove residual sand from metal castingsBeautify steel, stainless steel, aluminum, brass and other metals with a uniform matte finishRemove burrs, parting lines, flashings and other defects from castings and injection molded partsShot peen springs, journals, bearings, valve stems, tools and other products to enhance strength and reliabilityClean mold release and material from molds

Work chamber 42" wide x 23" deep x 30" highFull length neoprene-on-fabric glovesCeling mounted, two tube fluorescent light fixture with abrasive resistant Lexan cover for extraordinary visibiltySafety interlocks interupts blasting if either door is openedAdjustable, heavy dute chromed latchesHigh efficiency, 2.0 cu. ft. capacity, ASME-coded pressure vessel, fitted with 1" ID piping, industrial-quality blast hose and couplings and cabinet intergrated controlsUnique Air Logic system to maximize air flow to nozzleDouble wall, sound insulated doors14 guage steel all-welded constructionTilt out window, for tool-free glass changePressure regulatorBuilt in blow-off gun