Other Products / Services #5141665

Two part Gripper.
14-20 internal threaded base plate.
Satin chrome finish
For use with 564 332 77 or 719 aircraft cable only.STYLE
Flat Ceilings
COLOR
Silver
FINISH
Satin chrome-plated

4-part assembly with Gripper for 332 cable, side-exit module, base plate and anchor plate.
Satin chrome finish.
For use with 564 332 77 or 719 aircraft cable only.
STYLE
Flat Ceilings
COLOR
Silver
FINISH
Satin chrome-plated

DG-TRACK: Ceiling Track
Extruded Aluminum Track
80 Length
4 Track Clips Included per Track Series DG-TRACK

Adjustable tensioner.
14-20 Base Plate screws or bolts to structural surface.
Cover plate is decorative only.
Satin-chrome finish.
For use with 564 332 77 or 719 aircraft cable.
Note: Requires Allen wrench or similar tool to adjust tension.

3-part assembly.
Anchor Plate screws or bolts to structure.
Satin chrome finish.
For use with 116 332 77 or 719 aircraft cable only.

Adjustable tensioner holds cable at any angle.
14-20 Base Plate screws or bolts to structural surface.
Satin-chrome finish.
For use with 116 332 77 or 719 aircraft cable.
Note: Requires Allen wrench or similar tool to adjust tension.

Adjustable tensioner holds cable at any angle.
Anchor Plate screws or bolts to structural surface.
Satin-chrome finish.
For use with 116 332 77 or 719 aircraft cable.
Note: Requires Allen wrench or similar tool to adjust tension.

Type 10 Hook Gripper.
For use with 132 1mm 77 or 719 aircraft cable only.
FOR CABLE DIAMETERS
132, 1.0mm
SAFE WORKING LOAD GALV. CABLE
15 lbs, 22 lbs, See Weightload Chart link opposite for complete details
SAFE WORKING LOAD STAINLESS CABLE
15 lbs, 20 lbs, See Weightload Chart link opposite for complete details
STYLE
Hooks & Rings
CABLE EXIT
Bottom Exit
RELEASE
Standard Release
COLOR
Silver
FINISH
Bright nickel-plated

3-piece sloped ceiling coupler.
Half ball insert.
14-20 internal thread.
For use with 564 332 77 or 719 aircraft cable only.
FOR CABLE DIAMETERS
564, 332
STYLE
3-Part, Threaded, Sloped Ceilings
THREAD SIZE
14-20 UNC
COLOR
Silver
FINISH
Bright nickel-plated

Aircraft Cables & Fittings are available as either galvanized or stainless steel. Use the information below to create the part # for the cable you need. Use the Weightload Chart to make sure the cable and gripper are compatible.

Griplock cable assemblies are available in 77 or 719 galvanized or stainless, medium-to-high tensile strength aircraft cable. These assemblies are factory fitted with a variety of die-cast zinc, swaged aluminum, swaged copper or swaged steel terminals. Unless specified, Griplock terminals are guaranteed to the full published break-strength of the cable, however, when used in conjunction with grippers, cables will have a break strength that is less than the break strength of the cable alone. Please refer to the Installation and Weight Load Guidelines.