Our Products
Our offered Product range includes Advanced Fireworks Paper Tube Machine, Fireworks Paper Tube Machine, Quality Assurance Fireworks Paper Tube Machine, High Specification Fireworks Paper Tube Machine and Good qualityFireworks Paper Tube Machine.
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
the automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. it uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. it consists of paper cone winding umit, drying oven, and paper cone finishing unit.
the whole firework paper cone production process is as follows,
rolling---internal and external printing---paper edge grinding---paper cutting--- paper cone winding&trimming--- paper cone drying---head curling---final products collating
,
main, technical parameters, speed 50pcs/min
applicable glue white gluetapioca starch glue
power 49.2kw/380v/50hz/3phases
operator 1persons
1.winding machine
this winding machine is suitable for firework paper cone of various specification. after hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. it takes double speed variable frequency control technology. the winding speed will be adjusted automatically.
the whole process is easied by connecting with the dryer.
speed 50 pcs/min
power 13.27kw
2.collating machine
the speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. the after finishing machine can also be used individually.
main parameters
types various firework paper cone
speed 50pcs/min
air pressure 0.3-0.4mpa
3.drying machine
the auto-temperature control dryer uses chain-type circulation drying. after setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
the automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. it uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. it consists of paper cone winding umit, drying oven, and paper cone finishing unit.
the whole firework paper cone production process is as follows,
rolling---internal and external printing---paper edge grinding---paper cutting--- paper cone winding&trimming--- paper cone drying---head curling---final products collating
,
main, technical parameters, speed 50pcs/min
applicable glue white gluetapioca starch glue
power 49.2kw/380v/50hz/3phases
operator 1persons
1.winding machine
this winding machine is suitable for firework paper cone of various specification. after hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. it takes double speed variable frequency control technology. the winding speed will be adjusted automatically.
the whole process is easied by connecting with the dryer.
speed 50 pcs/min
power 13.27kw
2.collating machine
the speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. the after finishing machine can also be used individually.
main parameters
types various firework paper cone
speed 50pcs/min
air pressure 0.3-0.4mpa
3.drying machine
the auto-temperature control dryer uses chain-type circulation drying. after setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
the automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. it uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. it consists of paper cone winding umit, drying oven, and paper cone finishing unit.
the whole firework paper cone production process is as follows,
,
main, technical parameters, speed 50pcs/min
applicable glue white gluetapioca starch glue
power 49.2kw/380v/50hz/3phases
operator 1persons
1.winding machine
this winding machine is suitable for firework paper cone of various specification. after hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. it takes double speed variable frequency control technology. the winding speed will be adjusted automatically.
the whole process is easied by connecting with the dryer.
speed 50 pcs/min
power 13.27kw
2.collating machine
the speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. the after finishing machine can also be used individually.
main parameters
types various firework paper cone
speed 50pcs/min
air pressure 0.3-0.4mpa
3.drying machine
the auto-temperature control dryer uses chain-type circulation drying. after setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
the automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. it uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. it consists of paper cone winding umit, drying oven, and paper cone finishing unit.
the whole firework paper cone production process is as follows,
rolling---internal and external printing---paper edge grinding---paper cutting--- paper cone winding&trimming--- paper cone drying---head curling---final products collating
,
main, technical parameters, speed 50pcs/min
applicable glue white gluetapioca starch glue
power 49.2kw/380v/50hz/3phases
operator 1persons
1.winding machine
this winding machine is suitable for firework paper cone of various specification. after hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. it takes double speed variable frequency control technology. the winding speed will be adjusted automatically.
the whole process is easied by connecting with the dryer.
speed 50 pcs/min
power 13.27kw
2.collating machine
the speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. the after finishing machine can also be used individually.
main parameters
types various firework paper cone
speed 50pcs/min
air pressure 0.3-0.4mpa
3.drying machine
the auto-temperature control dryer uses chain-type circulation drying. after setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
1.FQ-1600s Paper Slitter:
FQ-1600s function is to slit paper into various sizes before reeling. It has self-locking function for upper and lower blades.Pneumatic reeling spindle, double reeling and step-less speed adjustment.
Maximum width: 1600mm
Power: 5.5kw?
Slitting width: 25mm+Machine size: 2500mm*2500mm*1500mm
2.LQZ-2 Tracing, Cutting Spiral tube machine:
The functions to roll the tube and long tube cutting. Tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. If particular length needed, precision cutter will need be connected.
Paper tube thickness: 0.8-10mm
Paper tube diameter: 20-200mm?
Speed: 3-15meters/min(step-less speed adjustment)
Gluing mode: Inclined gluing.
Paper Hanger: Whole frame
3.QGJ-98 Precise Cutter:
The function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.The machine has pneumatic control which makes it easy to adjust.Suitable for various specification of air-spin ning tube and short tube.
Paper tube inner 76ndiameter:30-100mm
Cutting thickness:1-8mm.
Cutting length:80mm-1500mm
Blades:8 sets(standard)
Power:1.5kw.Operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
The automatic production line for fireworks paper bobbins, the main driving force transmitted through a cam mechanism for time control purposes. It uses a range of electromechanical control technologies such as post operation control, high/low two-speed inverter control, photoelectric control, approach control and pneumatic delay control to ensure less manpower, low energy consumption, high efficiency and top quality production. It consists of paper cone winding umit, drying oven, and paper cone finishing unit.
The whole firework paper cone production process is as follows,
Rolling---Internal and external printing---Paper edge grinding---paper cutting--- paper cone winding&trimming--- Paper cone drying---Head Curling---Final products collating
,
Main, Technical parameters, Speed 50pcs/min
Applicable glue white glueTapioca starch glue
Power 49.2KW/380V/50HZ/3Phases
Operator 1persons
1.winding machine
This winding machine is suitable for firework paper cone of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, winding, head cutting, the semi-finished paper cone will be sent to the dryer. It takes double speed variable frequency control technology. The winding speed will be adjusted automatically.
The whole process is easied by connecting with the dryer.
speed 50 pcs/min
Power 13.27kw
2.collating machine
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and tower the waste rate. The after finishing machine can also be used individually.
Main parameters
Types Various firework paper cone
Speed 50PCS/min
Air Pressure 0.3-0.4mpa
3.drying machine
The auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
1.FQ-1600s Paper Slitter:
FQ-1600s function is to slit paper into various sizes before reeling. It has self-locking function for upper and lower blades.Pneumatic reeling spindle, double reeling and step-less speed adjustment.
Maximum width: 1600mm
Power: 5.5kw
Slitting width: 25mm+
Machine size: 2500mm*2500mm*1500mm
2.LQZ-2 Tracing, Cutting Spiral tube machine:
The functions to roll the tube and long tube cutting. Tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. If particular length needed, precision cutter will need be connected.
Paper tube thickness: 0.8-10mm
Paper tube diameter: 20-200mm
Speed: 3-15meters/min(step-less speed adjustment)
Gluing mode: Inclined gluing
Paper Hanger: Whole frame
3.QGJ-98 Precise Cutter:
The function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.The machine has pneumatic control which makes it easy to adjust.Suitable for various specification of air-spin ning tube and short tube.
Paper tube inner diameter:30-100mm
Cutting thickness:1-8mm
Cutting length:80mm-1500mm
Blades:8 sets(standard)
Power:1.5kw
Operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
1.FQ-1600s Paper Slitter:
FQ-1600s function is to slit paper into various sizes before reeling. It has self-locking function for upper and lower blades.Pneumatic reeling spindle, double reeling and step-less speed adjustment.
Maximum width: 1600mm
Power: 5.5kw?
Slitting width: 25mm+Machine size: 2500mm*2500mm*1500mm
2.LQZ-2 Tracing, Cutting Spiral tube machine:
The functions to roll the tube and long tube cutting. Tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. If particular length needed, precision cutter will need be connected.
Paper tube thickness: 0.8-10mm
Paper tube diameter: 20-200mm?
Speed: 3-15meters/min(step-less speed adjustment)
Gluing mode: Inclined gluing.
Paper Hanger: Whole frame
3.QGJ-98 Precise Cutter:
The function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.The machine has pneumatic control which makes it easy to adjust.Suitable for various specification of air-spin ning tube and short tube.
Paper tube inner 76ndiameter:30-100mm
Cutting thickness:1-8mm.
Cutting length:80mm-1500mm
Blades:8 sets(standard)
Power:1.5kw.Operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
1.fq-1600s paper slitter:
fq-1600s function is to slit paper into various sizes before reeling. it has self-locking function for upper and lower blades.pneumatic reeling spindle, double reeling and step-less speed adjustment.
maximum width: 1600mm
power: 5.5kw?
slitting width: 25mm+machine size: 2500mm*2500mm*1500mm
2.lqz-2 tracing, cutting spiral tube machine:
the functions to roll the tube and long tube cutting. tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. if particular length needed, precision cutter will need be connected.
paper tube thickness: 0.8-10mm
paper tube diameter: 20-200mm?
speed: 3-15meters/min(step-less speed adjustment)
gluing mode: inclined gluing.
paper hanger: whole frame
3.qgj-98 precise cutter:
the function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.the machine has pneumatic control which makes it easy to adjust.suitable for various specification of air-spin ning tube and short tube.
paper tube inner 76ndiameter:30-100mm
cutting thickness:1-8mm.
cutting length:80mm-1500mm
blades:8 sets(standard)
power:1.5kw.operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
1.FQ-1600s Paper Slitter:
FQ-1600s function is to slit paper into various sizes before reeling. It has self-locking function for upper and lower blades.Pneumatic reeling spindle, double reeling and step-less speed adjustment.
Maximum width: 1600mm
Power: 5.5kw?
Slitting width: 25mm+Machine size: 2500mm*2500mm*1500mm
2.LQZ-2 Tracing, Cutting Spiral tube machine:
The functions to roll the tube and long tube cutting. Tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. If particular length needed, precision cutter will need be connected.
Paper tube thickness: 0.8-10mm
Paper tube diameter: 20-200mm?
Speed: 3-15meters/min(step-less speed adjustment)
Gluing mode: Inclined gluing.
Paper Hanger: Whole frame
3.QGJ-98 Precise Cutter:
The function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.The machine has pneumatic control which makes it easy to adjust.Suitable for various specification of air-spin ning tube and short tube.
Paper tube inner diameter:30-100mm
Cutting thickness:1-8mm.
Cutting length:80mm-1500mm
Blades:8 sets(standard)
Power:1.5kw.Operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
1.FQ-1600s Paper Slitter:
FQ-1600s function is to slit paper into various sizes before reeling. It has self-locking function for upper and lower blades.Pneumatic reeling spindle, double reeling and step-less speed adjustment.
Maximum width: 1600mm
Power: 5.5kw?
Slitting width: 25mm+Machine size: 2500mm*2500mm*1500mm
2.LQZ-2 Tracing, Cutting Spiral tube machine:
The functions to roll the tube and long tube cutting. Tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. If particular length needed, precision cutter will need be connected.
Paper tube thickness: 0.8-10mm
Paper tube diameter: 20-200mm?
Speed: 3-15meters/min(step-less speed adjustment)
Gluing mode: Inclined gluing.
Paper Hanger: Whole frame
3.QGJ-98 Precise Cutter:
The function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.The machine has pneumatic control which makes it easy to adjust.Suitable for various specification of air-spin ning tube and short tube.
Paper tube inner 76ndiameter:30-100mm
Cutting thickness:1-8mm.
Cutting length:80mm-1500mm
Blades:8 sets(standard)
Power:1.5kw.Operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
1.FQ-1600s Paper Slitter:
FQ-1600s function is to slit paper into various sizes before reeling. It has self-locking function for upper and lower blades.Pneumatic reeling spindle, double reeling and step-less speed adjustment.
Maximum width: 1600mm
Power: 5.5kw?
Slitting width: 25mm+Machine size: 2500mm*2500mm*1500mm
2.LQZ-2 Tracing, Cutting Spiral tube machine:
The functions to roll the tube and long tube cutting. Tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. If particular length needed, precision cutter will need be connected.
Paper tube thickness: 0.8-10mm
Paper tube diameter: 20-200mm?
Speed: 3-15meters/min(step-less speed adjustment)
Gluing mode: Inclined gluing.
Paper Hanger: Whole frame
3.QGJ-98 Precise Cutter:
The function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.The machine has pneumatic control which makes it easy to adjust.Suitable for various specification of air-spin ning tube and short tube.
Paper tube inner 76ndiameter:30-100mm
Cutting thickness:1-8mm.
Cutting length:80mm-1500mm
Blades:8 sets(standard)
Power:1.5kw.Operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
1.FQ-1600s Paper Slitter:
FQ-1600s function is to slit paper into various sizes before reeling. It has self-locking function for upper and lower blades.Pneumatic reeling spindle, double reeling and step-less speed adjustment.
Maximum width: 1600mm
Power: 5.5kw?
Slitting width: 25mm+Machine size: 2500mm*2500mm*1500mm
2.LQZ-2 Tracing, Cutting Spiral tube machine:
The functions to roll the tube and long tube cutting. Tolerances: +5mm, which will meet the standard for cloth tube reeling and air spinning reeling. If particular length needed, precision cutter will need be connected.
Paper tube thickness: 0.8-10mm
Paper tube diameter: 20-200mm?
Speed: 3-15meters/min(step-less speed adjustment)
Gluing mode: Inclined gluing.
Paper Hanger: Whole frame
3.QGJ-98 Precise Cutter:
The function is to cut the semi-finished product into the required length of chemical fibre tube and air spinning tube.The machine has pneumatic control which makes it easy to adjust.Suitable for various specification of air-spin ning tube and short tube.
Paper tube inner 76ndiameter:30-100mm
Cutting thickness:1-8mm.
Cutting length:80mm-1500mm
Blades:8 sets(standard)
Power:1.5kw.Operator:1
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
Paper angle beads, also known as edge boards, are one of the most popular packaging products internationally, used to replace woo-d packaging and other bulky packaging methods. It has the characteristics of low price, light weight, sturdiness, and compliance with environmental requirements.
Paper Angle Protection Specification Wide20-100mm
Long50-9000mm
Thick2-8mm
Production speed: 0-40m/min
Paper layers: 12layers
Forming roller: 8 groups
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
Paper angle beads, also known as edge boards, are one of the most popular packaging products internationally, used to replace woo-d packaging and other bulky packaging methods. It has the characteristics of low price, light weight, sturdiness, and compliance with environmental requirements.
Paper Angle Protection Specification Wide20-100mm
Long50-9000mm
Thick2-8mm
Production speed: 0-40m/min
Paper layers: 12layers
Forming roller: 8 groups
Additional Information:
Payment Terms : L/C, T/T
Paper angle beads, also known as edge boards, are one of the most popular packaging products internationally, used to replace woo-d packaging and other bulky packaging methods. It has the characteristics of low price, light weight, sturdiness, and compliance with environmental requirements.
Paper Angle Protection Specification Wide20-100mm
Long50-9000mm
Thick2-8mm
Production speed: 0-40m/min
Paper layers: 12layers
Forming roller: 8 groups
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
Paper angle beads, also known as edge boards, are one of the most popular packaging products internationally, used to replace woo-d packaging and other bulky packaging methods. It has the characteristics of low price, light weight, sturdiness, and compliance with environmental requirements.
Paper Angle Protection Specification Wide20-100mm
Long50-9000mm
Thick2-8mm
Production speed: 0-40m/min
Paper layers: 12layers
Forming roller: 8 groups
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days
Paper angle beads, also known as edge boards, are one of the most popular packaging products internationally, used to replace woo-d packaging and other bulky packaging methods. It has the characteristics of low price, light weight, sturdiness, and compliance with environmental requirements.
Paper Angle Protection Specification Wide20-100mm
Long50-9000mm
Thick2-8mm
Production speed: 0-40m/min
Paper layers: 12layers
Forming roller: 8 groups
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 45 working days