Tiny-Clutch

Connecticut, United States

We manufacture 2417 Magnetic On-Off Clutch which is preferred for its counter clockwise drive as well as set screw & crosshole mounting. Our company has worked hard to establish an efficient distribution network. Therefore, buyers can order the product in mass and expect on time delivery. Our dedicated staff is always on their toes to make certain that the raw material used is of high grade and certified by the experts as well.

As a reliable name, we ensure that payment procedures remain secured with us. For this, we issue invoice to the customers stating the products, quantities and agreed prices. To provide our buyers with premium products, we make sure only superior grade metal is used in the manufacturing of our 1479 Fractional Revolution Sprocket Clutch.

Our 2536 One Way Roller Clutch come with a special housing that contains an arm too. We have parted our infrastructure into several units and one of them is warehouse wherein we keep a huge stock for furnishing urgent and quick requirements of the clients. For ensuring safety of the products during handling, warehousing and transportation, we make use of quality packing material. Moreover, the task of packaging is undertaken by the experts.

Thanks to our immense expertise in this domain that allows us to deliver nothing short of the best quality 1808 Backstopping Clutch. We are a quality driven firm ad thus make sure that the finest grade metal is used in the manufacturing of this clutch. Our product has a long service life and it complies with the industry standards.

Our 1478 Indexing Sprocket Clutch is preferred for its 48 tooth and 25 pitch sprocket type hub. Our company stocks the product in mass. Thus, we can cater to bulk/retail requirements with easy and ensure fast delivery of product. Contact us our customized packaging solutions. Apart from the standard packaging options, we can pack products in wanted amount and stack them accordingly in premium packaging.

We manufacture 2393 Magnetic Pulley Clutch which is preferred for its counter clockwise drive as well as set screw mounting. We are a high-flying name when it comes to superlative 2393 Magnetic Pulley Clutch! Maintaining high standards of our extensive array of products, we focus on the quality of raw inputs and material used at the initial stages. With this, the final product comes out to be the finest.

The M-Series Tiny-Clutches combine the high torque capacity of a spring clutch with the convenience and control of a conventional electric clutch. Based on a standard wrap spring clutch, with the added feature of an electromagnetic coil that actuates it, these clutches consumes a mere 2.5 Watts of power. When power is off, the hub & shaft are free to rotate independently. When power is on, it causes the spring to wrap down, coupling the hubs together & transmitting torque. The slight magnetic force is used only to maintain a tightly wrapped spring.  The sleeve is screwed or pinned to your shaft & clutch may be driven through either the sleeve or the hub.

Detail : M-Series Tiny-Clutches are available for shafts up to 13mm, torque loads up to 50in/lb & speeds up to 3000RPM. Special input or output hubs are available upon request to suit customers' needs.  We will design & build special or modified clutches for your application using stock components.  Clutches can be supplied with gears, sprockets, pullies or as complete mechanical assemblies consisting of clutch, shaft and adjacent parts.

M-Series Clutch Mounting : Tiny-Clutch M-Series Clutches should be mounted so that a stationary pin engages the slot in the torque arm. It is important that the torque arm is not firmly screwed down but allowed to float, as this may prevent the clutch from operating normally. We can provide a variety of adapter hubs made to your specifications to adapt our clutch to your application.

The AD-Series Tiny-Clutches combine the high torque capacity of a spring clutch with a bidirectional free wheeling output. These clutches are suited for use in applications such as, coil winding, spool winding, film drives or any similar application requiring an automatically free wheeling clutch. When torque is applied to the input it forces the spring to wrap down on the output drum. In this condition the clutch will drive. When torque is removed from the input, the spring is free to relax and unwind, thus decoupling the input from the output automatically, leaving the output free to rotate in both directions. The sleeve is screwed, pinned or keyed to your shaft & clutch may be driven through either the sleeve or the hub.

Detail : AD-Series Tiny-Clutches are available for Shafts up to 11/8" & torque loads up to 350lbs-in 39.5Nm. Special input or output hubs are available upon request to suit customers' needs.  We will design & build special or modified clutches for your application using stock components.  Clutches can be supplied with gears, sprockets, pullies or as complete mechanical assemblies consisting of clutch, shaft and adjacent parts.

Autodisconnect Clutch Mounting : The AD-Series clutches should be mounted so that a stationary pin engages the slot in the torque arm. It is important that the torque arm is not firmly screwed down but allowed to float, as this may prevent the clutch from operating normally.

The Tiny-Clutch 2425 Winding Clutch is based off of our AD50 Autodisconnect Clutch. This clutch features a larger 5/8" 15.9mm plain drum with two flats for the output hub, allowing quick, easy slip fitting of the driven load.  This clutch also has the drag arm reversed, to allow different mounting clearances. If you have special needs for your application please

Our 1869 Fractional Revolution Pulley Clutch has 3 lugs (3rd revolution) as well as set screw & cross hole mounting. Our products are the best in the industry, as they are specially manufactured as per international and national quality managements standards. As a reliable name, we ensure that payment procedures remain secured with us. For this, we issue invoice to the customers stating the products, quantities and agreed prices.

We manufacture 2448 Overrunning Spring Clutch which is preferred for its clockwise and counter clockwise drive. As a reliable name, we ensure that payment procedures remain secured with us. For this, we issue invoice to the customers stating the products, quantities and agreed prices. We have a team of qualified personnel to ensure proper quality control of products is done so that products are as per buyer's quality requirements.

Our 2795 Overrunning Gear Clutch is made with the finest grade metal and engineered with precision to perform impeccably. For ensuring safety of the products during handling, warehousing and transportation, we make use of quality packing material. Moreover, the task of packaging is undertaken by the experts. We own a well-constructed storage space that helps in keeping the batch under secured conditions and away from various spoiling factors such as sunlight, water, moisture, dust, rain and others.

SP-Series Tiny-Clutches are versatile line of wrap spring clutches available in the following configurations : Overrunning, On-Off, Indexing, Adjustable Indexing & Positive Stop Indexing. The various configurations allow great flexibility in application.

The basic spring clutch consists of three parts : An input hub, an output hub, and a spring. The greater the force the tighter the spring grips the hubs. When the rotation is reversed, the spring loosens its grip and slips. In the free direction there is slight drag caused by the spring being slightly smaller than the drums.

Detail : SP-Series Tiny-Clutches are available for shafts up to 16mm & torque loads up to 250lbs-in 28.2Nm. Special input or output hubs are available upon request to suit customers' needs.  We will design & build special or modified clutches for your application using stock components.  Clutches can be supplied with gears, sprockets, pullies or as complete mechanical assemblies consisting of clutch, shaft and adjacent parts.

We manufacture 1930 Indexing Spring Clutch which has a 19 tooth and 25 pitch sprocket type of hub. Our company has worked hard to establish an efficient distribution network. Therefore, buyers can order the product in mass and expect on time delivery. We inspect each and every element of the raw material that that helps us in delivering qualitative products. Under the vigil supervision of professionals, we conduct quality examinations to ensure that the range is free from defects.

The Tiny-Clutch 2871 overrunning roller clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction.

Detail : The 2871 overrunning roller clutch is based on our D75 roller clutch. The knurled hub on the housing allows installation of a pulley, gear or sprocket. This clutch has a ¼ inch (6.4mm) bore, the cam is screwed and/or pinned to your shaft, and power may be applied to the clutch through either the housing or the cam. If you have special needs for your application please Let Us Know.

2871 Overrunning Roller Clutch Direction :

• Right handed clutches drive clockwise and slip counter clockwise.
• Left handed clutches drive counter clockwise and slip clockwise.

The Tiny-Clutch 2876 overrunning gear clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction.

Detail : The 2876 overrunning gear clutch is based on our D93A roller clutch and features a 20 tooth, 20 pitch, 14.5^o pressure angle gear. This clutch has a 3/8 inch (9.5mm) bore, the cam is pinned to your shaft, and power may be applied to the clutch through either the gear or the cam. These clutches can be used for many different applications and are the original equipment clutches for multiple brands of hot stamping machines. If you have special needs for your application please Let Us Know.

2876 Overrunning Gear Clutch Direction :

• Right handed clutches drive clockwise and slip counter clockwise.
• Left handed clutches drive counter clockwise and slip clockwise.

Our 2579 Single Revolution Spring Clutch has a Plain Drum type of hub, which makes it an ideal choice. Our company has worked hard to establish an efficient distribution network. Therefore, buyers can order the product in mass and expect on time delivery. Keeping the quality standards high, we make certain that prior to production, the inputs (raw material) are examined by the professionals to make the final product free from defects.

The Tiny-Clutch 2874 overrunning gear clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction.

Detail : The 2874 overrunning gear clutch is based on our D93A roller clutch and features a 20 tooth, 20 pitch, 14.5^o pressure angle gear. This clutch has a 3/8 inch (9.5mm) bore, the cam is screwed and/or keyed to your shaft, and power may be applied to the clutch through either the gear or the cam. These clutches can be used for many different applications and are the original equipment clutches for multiple brands of hot stamping machines. If you have special needs for your application please Let Us Know.

2874 Overrunning Gear Clutch Direction :

• Right handed clutches drive clockwise and slip counter clockwise.
• Left handed clutches drive counter clockwise and slip clockwise.

Due to our exceptional and completely secured payment procedures, we have successfully gained full customer satisfaction. We make available varied payment procedures to ensure smooth transactions. Only high-quality raw materials have been used for the production of our entire range. We check the raw materials against varied quality parameters before procurement. Our 2580 Half Revolution Spring Clutch is made with the finest grade metal and engineered with precision to perform impeccably.

The Tiny-Clutch 2873 overrunning roller clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction.

Detail : The 2873 overrunning roller clutch is based on our D93A roller clutch. The knurled hub on the housing allows installation of a pulley, gear or sprocket. This clutch has a 3/8 inch (9.5mm) bore, the cam is screwed and/or keyed to your shaft, and power may be applied to the clutch through either the housing or the cam. These clutches can be used for many different applications and are the original equipment clutches for multiple brands of hot stamping machines. If you have special needs for your application please Let Us Know.

2873 Overrunning Roller Clutch Direction :

• Right handed clutches drive clockwise and slip counter clockwise.
• Left handed clutches drive counter clockwise and slip clockwise.

The Tiny-Clutch 2877 overrunning gear clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction.

Detail : The 2877 overrunning gear clutch is based on our D93A roller clutch and features a 24 tooth, 24 pitch, 14.5^o pressure angle gear. This clutch has a 3/8 inch (9.5mm) bore, the cam is pinned to your shaft, and power may be applied to the clutch through either the gear or the cam. These clutches can be used for many different applications and are the original equipment clutches for multiple brands of hot stamping machines. If you have special needs for your application please Let Us Know.

2877 Overrunning Gear Clutch Direction :

• Right handed clutches drive clockwise and slip counter clockwise.
• Left handed clutches drive counter clockwise and slip clockwise.

The Tiny-Clutch 2875 overrunning gear clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction.

Detail : The 2875 overrunning gear clutch is based on our D93A roller clutch and features a 24 tooth, 24 pitch, 14.5^o pressure angle gear. This clutch has a 3/8 inch (9.5mm) bore, the cam is screwed and/or keyed to your shaft, and power may be applied to the clutch through either the gear or the cam. These clutches can be used for many different applications and are the original equipment clutches for multiple brands of hot stamping machines. If you have special needs for your application please Let Us Know.

The Tiny-Clutch 1692 One-Way Clutch is based off of our D75PM Roller Clutch. This clutch features heavy duty springs, a 1/4" 6.4 mm bore & mounts to the shaft with a set screw. This clutch is available in Left hand drive & replaces Pellerin Milnor part # 54M105. If you have special needs for your application please Let Us Know.

We own a well-structured warehouse with the help of which we are capable of delivering a flawless 2865  Overrunning Roller Clutch. So, you can stay rest assured with us for damage-free product. For ensuring safety of the products during handling, warehousing and transportation, we make use of quality packing material. Moreover, the task of packaging is undertaken by the experts.

The Tiny-Clutch 2872 overrunning roller clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction.

Detail : The 2872 overrunning roller clutch is based on our D93A roller clutch. The knurled hub on the housing allows installation of a pulley, gear or sprocket. This clutch has a 3/8 inch (9.5mm) bore, the cam is screwed and/or pinned to your shaft, and power may be applied to the clutch through either the housing or the cam. These clutches can be used for many different applications and are the original equipment clutches for multiple brands of hot stamping machines. If you have special needs for your application please Let Us Know.

2872 Overrunning Roller Clutch Direction :

• Right handed clutches drive clockwise and slip counter clockwise.
• Left handed clutches drive counter clockwise and slip clockwise.

The Tiny-Clutch 1915 Back Stopping Clutch is based off of our D75MR Roller Clutch. This clutch features a 1/4" 6.4mm bore & mounts to the shaft with a crosshole. This clutch is available in Right hand drive & replaces Milford Rivet Part # SH194. If you have special needs for your application please Let Us Know.

A-Series Tiny-Clutches are miniature roller and cam type single revolution clutches. They also function as a general purpose, rapid action clutch for selectively coupling a continuously rotating input and a driven shaft. The clutch features fast response, high torque capacity for a given size and are not subject to overheating. Power is applied to the clutch housing through a pulley, gearor sprocket mounted on the housing shoulder & the cam is pinned or keyed to the driven shaft. A trip lug on the outer shoulder releases the clutch and stopping the shaft. The clutch remains free until the pawl is moved away from the trip lug. The driven shaft is always disengaged at a predetermined position & may be disengaged at intermediate points of rotation by adding additional lugs, resulting in simple control for indexing. The trip may be activated manually, mechanically, or electromagnetically.

Details : A-Series Tiny-Clutches are available for bores up 13mm, torque loads up to 80lbs-in 9.0Nm & speeds up to 7000RPM.  We will design & build special or modified clutches for your application using stock components.  Clutches can be supplied with gears, sprockets, pullies or as complete mechanical assemblies consisting of clutch, shaft and adjacent parts.

CR-Series Tiny-Clutches are captured roller and cam assemblies that work the same as our D-Series, but which are installed in your housing. The clutch has near zero backlash & allows high overrunning speeds, making them ideal for machines requiring overrunning, backstopping, freewheeling or one-way clutches, such as inclined conveyors, tape and film drives, riveters, stampers etc. CR-Series clutches are a proven cam and roller principle that provides long trouble free life. The outer housing and cam drive each other through wedging action between the rollers and the housing. The rollers are maintained in contact with the housing by individual springs & side plates capture the rollers in position relative to the cam. Power may be applied to the clutch through either the housing or the shaft. Clutches may be mounted for either R.H. or L.H. drive & the cam is screwed or keyed to the shaft. Materials - Cam is hardened & ground Steel; Rollers are hardened & ground ball bearing type steel. All stainless clutches are also available.

Detail : CR-Series Tiny-Clutches are available for shafts up to 1/2", torque loads up to 25lbs-in 2.8Nm & speeds up to 7000RPM.  We will design & build special or modified clutches for your application using stock components.  Clutches can be supplied as complete mechanical assemblies consisting of clutch, shaft and adjacent parts.

CR-Series Roller Clutch Benefits :

• A Compact Unit-Assembly Designed to be Built into the Customer's Equipment
• Proven Cam and Roller Principle for Long Trouble-Free Performance
• Positive, No-Slip driving Action
• Near Zero Backlash
• Will Not Jam in Free Direction
• High Free-Wheeling Speeds with Long Life
• Retainers are Positively Oriented and Securely Fastened to the Cam

CR-Series Roller Clutch Mounting : The CR-Series Clutches should be installed according to good bearing practice, using either bushings or bearings. It is important the clutch NOT be used as a roller bearing. 
For best performance, race should be concentric with housing bearing within .002 T.I.R. : Unhardened steel housing races are adequate for many applications. Housings with a race surface hardened to Rockwell C-60 are recommended for high torque, shock duty or for high overrunning speeds.

The D-Series TINY-CLUTCH is a miniature roller and cam type one-way clutch. It is designed to be built into the customer's equipment and has no loose parts. The D-Series is most frequently used to allow a driven member to overrun the input, or for backstopping a load, it can also function to convert oscillating motion to rotary motion. The clutch uses our proven cam and roller principle for long trouble free performance. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction. Each roller is energized by a spring which is held square and centered in a drilled pocket. The cam, housing and rollers are made of hardened steel. The knurled hub on the housing allows installation of a pulley, gear or sprocket. The cam is screwed, pinned or keyed to your shaft & power may be applied to the clutch through either the housing or the cam.

Detail : D-series Tiny-Clutches are available for shafts up to 13mm, torque loads up to 50lbs-in 5.6Nm & speeds up to 7000RPM.  We will design & build special or modified clutches for your application using stock components.  Clutches can be supplied with gears, sprockets, pullies or as complete mechanical assemblies consisting of clutch, shaft and adjacent parts.