Our Products
Material Handling Machines & Systems
1 Products availablePollution Control Machines & Devices
1 Products availableSewage Treatment Plant
1 Products availableConstruction Machinery & Equipment
1 Products availableOur product range contains a wide range of Jaw Crusher PE400*600, PE750*1000, Vertical Shaft Impact Crusher VSI SERIES, Mobile Crusher, Stone Crusher and Cusher
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
Jaw crusher is mainly composed of frame, eccentric shaft, large pulley, flywheel, side guard board, elbow board, back seat of elbow board, clearance adjusting screw, return spring, fixed jaw board and movable jaw board.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : NONE
Delivery Time : 15DAYS
Working principle
The motor drives the main shaft of the bearing barrel drive part to rotate at high speed. At the same time, the rotor rotates at high speed along with the main shaft. The materials entering the impeller are accelerated by the impeller and then sprayed into the crushing chamber. They collide with the lining materials formed in the crushing chamber and grind with each other. After accelerating the materials, the kinetic energy is obtained and converted into the energy required for crushing or shaping materials. The materials circulating in the crushing chamber for many times are in the circumference. Under the action of surrounding gas eddy current, it is broken and shaped for many times, so as to realize continuous crushing and shaping of materials, and discharge from the lower part of the machine body to form the required finished materials. This crushing method is stone striking, which is mainly applied to shaping and crushing of stones. In addition, this equipment is equipped with stone striking crushing method, which is different from stone striking: after the materials are ejected from the rotor, they are The impact block installed in the crushing chamber is impacted to accelerate the energy obtained by the material into the energy required for collision and crushing with the impact block. After the impact, the material is directly discharged from the lower part of the body, which can not achieve multiple cycles of crushing in the crushing chamber. This crushing method is mainly applicable to the working occasions with crushing as the main purpose (to provide a large crushing ratio).
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : NONE
Delivery Time : 15 DAYS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : NONE
Delivery Time : 15 DAYS