We offer the best product range of eagle, Osprey, Premium hardwall gasoline pump hose, Static Wire Gasoline Hose Assemblies and Fuel Oil Hose.
Recommended anywhere a hardwall hose is required. Recommended for all gasoline and gasolineEthanol blends at Ethanol levels designated as “gasohol” (E10 maximum or less), diesel fuel and diesel fuelbiodiesel blends with nominal biodiesel concentrations up to 5% (B0–B5), kerosene and fuel oil (heating oil), leaded and unleaded gasoline. Designed for durability, flexibility, and easy handling. Highly resistant to cuts, abrasions, sun and weather. Resists kinking and eliminates meter creep. Improves ozone and abrasion resistance while providing increased life. Improves draping and handling characteristics. Will not mark or scratch vehicle finishes. Hose material is private branded and UL Listed to UL 330 and CANULC-S612-99. All curb pump hose assemblies are 100% pressure tested, inspected for electrical continuity and sample pull tested.
Designed for durability and flexibility Oil and abrasion resistant Supplied with static wire Recommended for use with electric pumps Static wire hose always recommended with electric motors Designed for use in agricultural, industrial and construction maintenance applications Engineered for dispensing gasoline, kerosene and oil from farm and barrel-type pumps where UL approval is not required Curb pump hose recommended for: – UL Listed hose material requirements – For high aromatics or severe applications All Farm Tank hose assemblies are 100% inspected for electrical continuity Do not use these hoses at a service station or to refuel aircraft
Used for all home fuel oils, leaded and unleaded gasolines and diesel and tractor fueling applications All fuel oil hose assemblies are 100% hydrostatic tested Smooth cover gives it minimum ground drag, added freedom of movement and abrasion resistance Every hose receives a unique serial number
Heavy duty 1½” swivel inlet. Quick change swiveling spout design – QD type. Inexpensive to repair – all seals independently replaceable. Easy operation, fingertip sensitivity and adjustable closing speed. Swivel interlock compatible design. Rugged polyurethane handle guard with side protection. Seals good to -50° F and compatible with all aviation fuels, bio diesel and jet. Spout covers and retainer are polyurethane. No plastic components, no cast metal parts, 300 series stainless steel shaft and fasteners. Eagle nozzle with black handle recommended for use with jet fuel. Eagle nozzle with red handle recommended for use with AvGas.
Specifically designed for business and private over-the-wing aviation fueling. Automatic shut-off when wing tanks are full. Easy to remove and clean fuel 100 mesh stainless steel fuel filter assembly. Nozzle comes with red full grip guard to identify use only with aviation fuel or black full grip guard for jet fuel application if desired. Complies with IE1540 and NPA 407.
Husky® 1A nozzle shuts off when the gas tank is full. Aluminum reinforced spout bushing keeps the spout tip round and acts as a captive fastener to prevent tip-end sensor damage. Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage. Comes standard with smooth full grip guard.
Nozzle designed with extra large hand opening to accommodate gloves or mittens. Check valve is in nozzle body, not the spout, for inexpensive and fast spout replacement. Includes a self-adjusting stem packing. Automatic shut-off with dual poppets for easy opening. 1690 is equipped with two position hold open latch. 1691 is not equipped with two position hold open latch. Right angle design allows nozzle to “fit” close to walls and corners. Cast-in protective standoffs provide durability with rough usage.
Husky® V3 nozzle shuts off when: — the pump shuts off. — the gas tank is full. — the lever is opened before the pump is turned on. — the leak detector has not completed the test cycle. Husky® V3 nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. Husky® vapor return line is an internal part of the body casting, thus eliminating potential vapor leak points. Uses coaxial spout with spout spring and has large vapor-capturing holes at the end of the spout. Nozzle spout and spout spring are covered by a one year warranty. Plunger design provides a better seal to eliminate potential leaking and staining.
Husky® VIIIS nozzle shuts off when: — the pump shuts off. — the gas tank is full. — the lever is opened before the pump is turned on. — the leak detector has not completed the test cycle. Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. Spout is reinforced with thick aluminum bushing that retains spout spring and keeps spout from rounding-in: the two leading causes of clicking off and splash-back spillage.