Huatao

SHIJIAZHUANG, United States

Our seamless felt belt is mainly used on the felt-type cooling bed in the aluminum industry. Compared with the traditional graphite cold table, our felt belts are resistant to high temperatures and wear, and are soft and non-polluting. It will not leave any scratches on the surface of aluminum profiles, ensuring the aesthetic appearance of the profiles. This belt is detachable, easy to install and store. After years of practice and research, our company has mastered the most reasonable production Process to provide you with quality products

PBO felt pad is made of high temperature fiber PBO + Kevlar fiber + high temperature fabric.Considering the discharge ports temperature is very high, and will have high density requirements, so the PBO block will be involved in a middle layer of high temperature fabric, so that Acupuncture will be better, each layer of cotton to better stab together, finished product density will increase. In general, pure PBO felt blocks (made of 100% PBO fibers) are more suitable for aluminum extrusion machines with double-sided discharge ports.

Material:PU felt+synchronous belt(hot melt bonding)

Temperature Resistance:180600

Length:2000mm25000mm

Width:20mm200mm

Total Thickness:6mm 8mm 10mm 12mm

Feature:Strong tension, no deviation, non slip, low noise

Application Area:2500T10000T Extrusion production line

Thermal transfer printing equipment Blanket, also called endless seamless blanket, endless loop blanket tape, is made of 100% nomex fiber, the maximum temperature of 280 degrees Celsius, due to the special process, so there have no joints and it is the real seamless , the surface is more smooth, and has acid, alkali, heat, cold, abrasion, oil, burning resistance, high temperature, flame retardant, heat, non-slip, moisture, anti-static, anti-corrosion and other features.

Our this kind of PBO felt roller is a kind of felt roller which is specially used on the cooling table of aluminum extrusion industry. The whole roller surface does not have any seams, and there is no break zone. This kind of PBO felt roller is a roller specially used for the position of the discharge port. Its temperature resistance can reach 600, and its surface is smooth, which can well protect the flatness of aluminum profiles. With dedicated cold transfer equipment, it plays a very good role in protecting aluminum profiles and cooling down. The application of such felt cylinders has been very mature in recent years.

The temperature of the profile will lower down to 450C when it is transferred about 10 meters to the run-out table, and at this stage the best material is Kevlar.High density is the key factor for good abrasion resistance , morover, resin treatment is available on request for better abrasion resistance and longer service life.

Color:Off white

Working temperature:250 for long time

Length:50mm20000mm

Thickness:1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm

Method of stitch:Single stitch , double stitch , quadri stitc

Kevlar Pad Is made of 100% Kevlar fiber acupuncture, the color is yellow, the disintegration temperature is 480-500 , mainly used for extrusion of aluminum extrusion line on a moving beam of the cooling bed, with high temperature, wear-resistant, High density, non-delamination, lint-free, non-polluting aluminum profiles.

PBO belts are not required for every production line, and only the production line that produces large, irregular aluminum profiles is used.When the aluminum profile was extruded from the discharge port, after the initial introduction of cooling, aluminum temperature is still high. To be aluminum from the slide table to the feed station, the felt belt or roller will soon be worn due to high temperatures. In this case, the PBO felt is a better choice. PBO belt&roller with the middle of the five-story high temperature fabric, that will make the conveyor belt tension stronger.