Epoxy Coatings #5141583

DLC Coating stands for diamond-like carbon coating, and is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness, and high corrosion resistance.

DLC coatings can have different structures and properties that rely on the ratio of SP3 (diamond) and SP2 (carbon) or other fillers like hydrogen, silicon, and metal in the layer.

The performance of our PVD coatings deposited using our proprietary High Energy PVD process HI3D is superior to many other commercially available coatings in most demanding heavy-duty applications.
IBC's coatings increase the life of large stamping, forging, die-casting, plastics, rubber, extrusion and cutting tools and machinery.
Tools and machine parts have far higher wear and corrosion resistance, pick-up, galling and fretting are eliminated, friction and release forces are minimized in tribological pairs.
Our coatings provide lubrication-free low friction and high wear resistance for clean room automation machinery in semiconductors manufacturing.
IBC's coating systems have high productivity, profitability and reliability of the process and equipment. They provide a wide selection of coatings for numerous applications.

TD Coatings are based on ultra-dense Vanadium Carbide. They have developed a strong reputation in the metal forming and die casting industries for their high hardness and superb performance characteristics.

Vanadium Carbide coatings typically have a thickness of 0.0002-0.0003" with a hardness of 3500 to 3800 HV (Vickers Hardness), well above 90 HRC. For comparison, hardened tool steel measures 500-800 HV (55-65Rc), Hard Chrome measures 600-900 HV (60-66Rc), and TiN (Titanium Nitride) is 2200-2500 HV.

The high hardness and thickness of the coating provides the capacity to withstand loads developed at forming radii, while the fine nano-structure of the coating increases the shear stress capacity. Due to the low coefficient of friction (less than 0.08), flow of the material is eased and abrasive wear of the tool as well as galling (pick-up) are delayed.

The TD Process is used to improve and extend the life of tooling for many industries, including sheet metal, cold forging, aluminum die casting, powdered metal, glass, textile, wire, and many others.