Post Buy Requirement

Other Products / Services

Heatsink

  • Part No. 600502F00000
600502F00000 Heatsink Dimensions.
Six pieces total. 5 pieces are 8 feet long, 1 piece is 5 feet long.
View Complete Details

Aluminum Heatsink Extrusion

  • part number 600502F00000
Excellent for cooling power transistors or thyristors
such as SCRs or Triacs.Overstock Items For Sale. Aluminum Heatsink Extrusion.
Aavid Thermalloy part number 600502F00000.
ICS part number 603-1348. Total 45 feet.
View Complete Details

Interval Delay Timer

  • Voltage 240 VAC
Typical application of a KD3 Digital Series Interval Delay Timer is to control an externally connected relay. Upon voltage application, the output is energized and the delay begins. On adjustable units, an externally connected resistor determines the duration of the time interval. Upon completion of the delay, the output is de-energized. The timer resets when input voltage is removed.
View Complete Details

Electronic Controls

Current Sensing Relays
and Monitors
Motor Speed Controls
Custom Vending Controls
Dispensing Controls
Railway Industry Controls
Solid State Sequence Controls
Modular Timer Assemblies
Garbage Compactor Controls
Industrial Incinerator Controls
Runway Lighting
Power Supplies
Microprocessor Controls
True Off Delay Relays
Infrared Sensors
Electronic Flashers
Strobe Controls
Time Delay Relays
View Complete Details

Fixed Time Delay Microtimer

  • Current Rating 200mADC resistive
  • Series ICS KM
  • Voltage Range: 85% to 110%
The ICS KM Series Fixed-Time Microtimer is designed to provide standard time delay actions, operate on commonly availabe voltages and to fit where space is limited. A generous selection of standard and custom time ranges and voltage options allow this timer to be extremely versatile. With output current capability up to 200mA, it is suitable for controlling many of today's readily available relays.
View Complete Details

Fixed Time Delay KM Microtimer

  • series ICS KM
The ICS KM Series Fixed-Time Microtimer is designed to provide standard time delay actions, operate on commonly availabe voltages and to fit where space is limited. A generous selection of standard and custom time ranges and voltage options allow this timer to be extremely versatile. With output current capability up to 200mA, it is suitable for controlling many of today's readily available relays.
View Complete Details

Infrared Proximity Sensor

Our Infrared Proximity Sensor is one of the latest developments where hygiene is a vital issue, such as in restaurants, hospitals and public washrooms. When the infrared beam detects an object, it turns on a device. A preset timer turns off the device.
View Complete Details

Off Delay Timer

  • Volt 240
The KH2 Series off delay timer operates with power continuously applied. The load, such as a relay coil, is energized when an external control voltage is applied. When the control voltage is removed, the off delay period begins while the load remains energized. At the end of the delay, the load deenergizes and the timer resets.
View Complete Details

Digital Countdown

  • Size 1.75"
The heart of a KD Series digital countdown off or on delay timer is a digital integrated circuit. The timer function is to provide either an off delay or on delay to a load such as a relay. The timing range can be either fixed or variable by means of an external resistor or potentiometer connected to the timer.
View Complete Details

Repeat Cycle

  • Series KD5
  • Range 0.1 second to 10 hour
Typical application of a KD3 Digital Series Interval Delay Timer is to control an externally connected relay. Upon voltage application, the output is energized and the delay begins. On adjustable units, an externally connected resistor determines the duration of the time interval. Upon completion of the delay, the output is de-energized. The timer resets when input voltage is removed.

Timing range options are either Adjustable or Fixed from .1 seconds to 10 hours. AC input voltage options are 12, 24, 120 and 240 VAC. DC voltage options are 12, 24, 48 and 110 VDC. Output current range is 20 ma. to 500 ma.
View Complete Details

Digital Countdown Timer Circuit

  • Series KD5
The KD series repeat cycle timer produces an output which alternates between an energized and deenergized state at a repetitive rate. The first cycle begins when input voltage is applied to the timer. During this period the output is deenergized. At the end of the first delay or off period, the output energizes and the second or on period begins. When the second delay period ends, the output deenergizes and the first period repeats. This onoff sequence will continuously repeat while input voltage is present. When input voltage is removed, the output deenergizes and the timer resets.

The KD5 Series repeat cycle timer provides equal off and on times, controlled by a single timing resistor or potentiometer. The KD6 Series produces two independent on and off times, controlled by two separate resistors or potentiometers.
View Complete Details

KH1 Analog

  • Capacity 24 VAC
The KH1 Analog Series on delay timer provides an on delay period between the application of input voltage and energizing a load. The timer is connected to a voltage source and a load. The on delay period begins when voltage is applied. The load remains deenergized until the end of the delay at which time it energizes. It remains energized as long as input voltage is present. When input voltage is removed, the load deenergizes and the timer is reset.
View Complete Details

The KH1 Analog

  • Size 0.1 to 300
The KH1 Analog Series on delay timer provides an on delay period between the application of input voltage and energizing a load. The timer is connected to a voltage source and a load. The on delay period begins when voltage is applied. The load remains deenergized until the end of the delay at which time it energizes. It remains energized as long as input voltage is present. When input voltage is removed, the load deenergizes and the timer is reset.
Typical application of the KH1 on delay timer is to configure a time delay relay by connecting the timer to a voltage source and a relay coil.
View Complete Details

Adjustable Time Delay Microtimer

  • Dimensions 1.05"L x 0.475"W x 0.15" Thick
  • Voltage Range: 24VDC to 125VDC
The ICS KA Series Adjustable Microtimer provides time delay actions that include but are not limited to on delay, off delay, interval delay and recycle timer. Standard and custom time ranges and voltage options are offered. With output current capability up to 500mA at 12VDC, it is suitable for controlling many available relays, solenoids and other load types. The compact size can be beneficial where space is limited.
View Complete Details

Ab Exercise Machine

  • series 9300057 UPS
The Lifeline 9300057 UPS components include power supply, battery backup and battery rack. The system is U.L. Listed and suitable for use with fire alarm systems. Runtime on battery backup is four hours minimum per specification with UPS at half load (2.5AAC). Runtime on battery backup with system at full load (5AAC) is two hours.
View Complete Details

Relay Timer

  • Size 1/4"
The KG series chassis mount relay timer is a self-contained delay unit that includes an on-board relay and timer module. The circuit board, with attached standoffs, can be mounted to a chassis in minutes. 14" quick-connect blade connectors provide the external wiring connections making installation simple and fast.
View Complete Details

Repeat Cycle Timer

  • Series KD5
The KD Series REPEAT CYCLE Timer produces an output which alternates between an activated
and deactivated state at a repetitive rate. The first cycle begins when input voltage is applied to the
timer. During this period the output is deactivated. At the end of the first delay or OFF period, the
output energizes and the second or ON period begins. When the second delay period ends, the
output deactivates and the OFF period repeats.
This ONOFF sequence cycles continuously while input voltage is present. When input voltage is
removed, the output deactivates and the timer resets. The KD5 Series REPEAT CYCLE timer is
controlled by a single timing resistor and provides equal OFF and ON times. The KD6 Series is
controlled by two separate timing resistors and produces two independent OFF and ON times.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Instrumentation & Control Systems, Inc.)
  • Addison, IL 60101 map, United States
  • Share us via